Adam Equipment Coin Counting Scale CCSArevA1 User Manual
Have a look at the manual Adam Equipment Coin Counting Scale CCSArevA1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 35 Adam Equipment manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
14 | P a g e © Adam Equipment Company 2009
Press [M+]
“ 3 ” “ 498” “ 175.50”
After 2 seconds the scale will return to normal ope ration. The
weight on the scale must return to zero before anot her value is
allowed to be stored into memory.
NOTE : Tokens cannot be added to memory as they do not h ave a value
associated with them.
If tokens are to be added to memory with coins, an error message
will be displayed:
“ ErrOr...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-15.png "Page 16
14 | P a g e © Adam Equipment Company 2009
Press [M+]
“ 3 ” “ 498” “ 175.50”
After 2 seconds the scale will return to normal ope ration. The
weight on the scale must return to zero before anot her value is
allowed to be stored into memory.
NOTE : Tokens cannot be added to memory as they do not h ave a value
associated with them.
If tokens are to be added to memory with coins, an error message
will be displayed:
“ ErrOr...")
![Page 17
15 | P a g e © Adam Equipment Company 2009
3.5 MEMORY RECALL
Pressing the [MR] key will allow you to view each set of data
stored into the memory.
The first time [MR] is pressed the first set of data is shown with
Denomination window showing “ ≡ 1 ≡” for 1 second followed by
the Denomination , Quantity and TOTAL windows showing the
quantity and value for this first item.
“ 1 ” “ ” “ ” for 1 second and then
“...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-16.png "Page 17
15 | P a g e © Adam Equipment Company 2009
3.5 MEMORY RECALL
Pressing the [MR] key will allow you to view each set of data
stored into the memory.
The first time [MR] is pressed the first set of data is shown with
Denomination window showing “ ≡ 1 ≡” for 1 second followed by
the Denomination , Quantity and TOTAL windows showing the
quantity and value for this first item.
“ 1 ” “ ” “ ” for 1 second and then
“...")
![Page 19
17 | P a g e © Adam Equipment Company 2009
A display produced as shown in the previous example is as follows:
“ 0.20 ” “ 285” “ 57.00”
Press [M+]
“ 1 ” “ 285” “ 57.00”
Printed record shows as follows:
Any time the [Total /
] key is pressed the current totals held in memory ar e
printed. After the 2
nd weighing in the previous sample, the printed recor d
shows as follows:
Date: 2009/01/05
Time:...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-18.png "Page 19
17 | P a g e © Adam Equipment Company 2009
A display produced as shown in the previous example is as follows:
“ 0.20 ” “ 285” “ 57.00”
Press [M+]
“ 1 ” “ 285” “ 57.00”
Printed record shows as follows:
Any time the [Total /
] key is pressed the current totals held in memory ar e
printed. After the 2
nd weighing in the previous sample, the printed recor d
shows as follows:
Date: 2009/01/05
Time:...")
![Page 20
18 | P a g e © Adam Equipment Company 2009
The [MC/
] key is active when the total values are displayed. If [MC/
] is
pressed the memory will be cleared.
After 2 seconds the scale will return to normal ope ration.
The [Print] key will record a list of all sets of data stored in the memory and
the total amounts. For the sample above, the print ed record is:
Date: 2009/01/05
Time: 12:23:15
Record 1
Denomination 0.20...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-19.png "Page 20
18 | P a g e © Adam Equipment Company 2009
The [MC/
] key is active when the total values are displayed. If [MC/
] is
pressed the memory will be cleared.
After 2 seconds the scale will return to normal ope ration.
The [Print] key will record a list of all sets of data stored in the memory and
the total amounts. For the sample above, the print ed record is:
Date: 2009/01/05
Time: 12:23:15
Record 1
Denomination 0.20...")
![Page 23
21 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press and hold the [€ / £ ] key and then apply power. Hold the key
down until the display shows:
“ Pin ” “ ”...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-22.png "Page 23
21 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press and hold the [€ / £ ] key and then apply power. Hold the key
down until the display shows:
“ Pin ” “ ”...")
![Page 24
22 | P a g e © Adam Equipment Company 2009
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “ 4.100 ” “ 0.00”
Press [Total/
] to store the new value. “...](http://img.usermanuals.tech/thumb/168/2126/w64_coin-counting-scale-ccsareva1-1478546944_d-23.png "Page 24
22 | P a g e © Adam Equipment Company 2009
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “ 4.100 ” “ 0.00”
Press [Total/
] to store the new value. “...")
19 | P a g e © Adam Equipment Company 2009 4.3 INPUT COMMANDS The following commands duplicate the functions of keys. All commands are terminated by carriage return/line feed. Z Same as [>Z
20 | P a g e © Adam Equipment Company 2009 5.0 PARAMETERS 5.1 SETTING COIN WEIGHT There are 8 coins and 3 tokens available for the us er. Other versions of this scale may use other combinations. See the Secured Parameters Section (6.0) for details on how this can be changed. Eac h coin has a weight associated with the Euro style or the Sterling styl e. The initial values set for the coins are: Coin Denomination € (Wt1) £ (Wt2) Token1 , T1 0.000 0.000 Token2 , T2 0.000 0.000 Token3 , T3 0.000 0.000 0.01 2.30 3.56 0.02 3.06 7.12 0.05 3.92 3.25 0.10 4.10 6.50 0.20 5.74 5.00 0.50 7.80 8.00 1.00 7.50 9.50 2.00 8.50 12.00
21 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press and hold the [€ / £ ] key and then apply power. Hold the key
down until the display shows:
“ Pin ” “ ” “ ”
Enter the access code (4 numbers) using the numeric keypad. A “-” will be
displayed for each number.
“ Pin ” “ - - - - ” “ ”
Press the [Total/
] key. If the access code number was correct it
will advance to the unit weight setting program, ot herwise it will
return the scale to counting. The first value displ ayed is the first
token value. The displays show:
denomination unit weight
“ t1 ” “ 0.00” “ 0.00”
To select another denomination press the key for th at
denomination. To select either the Euro or Sterlin g style press the
[€ / £] key. Note the arrow in the Quantity window.
For example the 0.10 (10) key will show:
“ 0.10” “ 4.100 ” “ 0.00”
Unit weight is 4.100 grams for the Euro style and 6 .500 for the Sterling
style.
22 | P a g e © Adam Equipment Company 2009
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “ 4.100 ” “ 0.00”
Press [Total/
] to store the new value. “ SAVE” will be displayed
briefly.
Repeat the procedure for any other changes necessar y.
If a printer is connected press the [Print] key to list of all the
denominations and their values.
At any time press the [CE /Esc] key to escape the function.
23 | P a g e © Adam Equipment Company 2009 5.2 DETERMINING NEW COIN OR TOKEN WEIGHTS The following procedure is used to determine the average weight of coins or tokens. This can be used to verify the coin weight stored in memory and to set new weights for tokens. 5.2.1 Procedure Before beginning have a representative sample of th e coins or tokens to be used. You should have a minimum of 10 0 pieces- larger the number of coins the more accurate the av erage weight will be. Set the scale to show weight temporarily by pressin g the [CE/Esc] key for 4 seconds. The weight will be displayed u ntil [CE /Esc] or any other key except [Tare] is pressed to return to normal operation. The [Tare] key will continue to function as normal to zero the display. Verify the scale calibration by placing a known wei ght on the platform. If the scale is not accurate (±2g) it must be re-ca librated before proceeding. See Section 5.4.3 for calibration detai ls. Place the tokens or coins to be checked on the scal e. If they are in a container it will be necessary to Tare the wei ght of the container so the Quantity display shows zero before placing the coins or tokens in the container. The Denomination display will show the weight of the coins. Determine the average weight by dividing the total weight by the number of coins or tokens in the sample.
24 | P a g e © Adam Equipment Company 2009
It is then necessary to enter this value (rounded t o 3 places:
x.xxx) into memory as above. For example 12883g fo r 2000
tokens is an average of 6.4415 grams, Enter 6.442 g rams.
5.3 SECURED
FEATURES
The CCEU Coin Counting scale has a number of functi ons that can only be
accessed by a qualified user.
Two levels of security are available. For the firs t level of security, a user
password is required to allow the access to change the piece weight for the
different denominations of coins. See Section 5.1.
The second level of security will allow more functi ons to be set. See section
6.0.
The first level of functions includes:
F1 Baud Rate
F2 Parity
F3 Sleep
F4 Calibration
F5 Access Code Number Setting
F6 Language
25 | P a g e © Adam Equipment Company 2009 5.4 WEIGHING PARAMETER FUNCTIONS The following functions control the weighing system in the scale. To set these functions, follow the procedure- Turn the scale on while holding the [Total/ ] key down and then release the key. “ Pin ” “ ” “ “ Enter the default access code “0000”. “ Pin ” “ - - - - ” “ “ Press the [Total/ ] key. The first function is F1 Baud Rate Setting. “ F1 ” “ bAud ” “ SEt ” Press the [MC/ ] key to advance to each of the other functions or [CE/Esc] to return to normal operation after running a self -test. 5.4.1 F1 F1F1 F1 - Baud Rate Setting To change the baud rate used with the RS-232 interf ace, follow this procedure. When the display is showing: “ F1 ” “ bAud ” “ SEt ”
26 | P a g e © Adam Equipment Company 2009
Press the [Total/
] key.
“ F1 ” “ bAud ” “ 1200 ”
Current baud rate
For setting a new baud rate use the [MC/
] key to cycle through the
options which are 600, 1200, 2400, 4800 and 9600.
“ F1 ” “ bAud ” “ 4800 ”
New baud rate
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value.
“ F1 ” “ bAud ” “ SEt ”
To move to the next function press [MC/
]
“ F2 ” “ ParitY ” “ SEt ”
Or press [CE /Esc] to return to normal operation.
27 | P a g e © Adam Equipment Company 2009
5.4.2 F2
F2F2
F2
- PARITY
To change parity used with the RS-232 interface, fo llow this procedure.
When the display is showing:
“ F2 ” “ ParitY ” “ SEt ”
Press the [Total/
] key.
“ F2 ” “ ParitY ” “ n 8 1 ”
Current parity, N one, 8 data bits, 1 stop bit
For a new parity setting, use the [MC/
] key to cycle through the
following options:
n81 Parity = None, 8 data bits and 1 stop bit.
E71 Parity = Even, 7 data bits and 1 stop bit.
o81 Parity = Odd, 7 data bits and 1 stop bit.
“ F2 ” “ ParitY ” “ E 7 1 ”
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value.
“ F2 ” “ ParitY ” “ SEt ”
28 | P a g e © Adam Equipment Company 2009
Press [MC/
] to advance to the next functions
“ F3 ” “ SLEEP ” “SEt ”
Or press [CE /Esc] to return to normal operation.
5.4.3 F3
F3F3
F3
- SLEEP
The scale can be set to turn off automatically if i t is not being used. The time
can be from 1 to 10 minutes, or disabled. To change the time , follow this
procedure.
When the display is showing:
“ F3 ” “ SLEEP ” “ SEt ”
Press the [Total/
] key.
“ F3 ” “ SLEEP ” “ 1 ”
Current setting, 1 minute
For a new value, use the [MC/
] key to cycle through the options, 1, 5
or 10 minutes, 0 will disable the automatic turn off function.
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value.
“ F4 ” “ CAL ” “ SEt ”