Addonics Technologies 4U RAID Rack RR2035RPHMS User Manual

							The RAID and Disk Information screen (shown when the program was launched) will now
show the Port Multiplier with an Array. The drives are now listed as M0-M4, indicating they
are members of the array. If spares are present (individual drives added later, and the EZ
switch is in the OFF position), they would be listed as S0, S1, etc. On the right pane, the
RAID  Level,  status,  capacity  and  members  that  are  online  are  listed.  Status  will  show
“Normal”  (all  members  on  line),  “Degraded”  (a fault-tolerant  array  with  a  drive  failure
needing  service),  “Rebuilding”  (a  fault-tolerant array  in  the  process  of  reconstructing  lost
data onto a spare) or “Broken” (an array that has lost all data).
In the event of a drive failure, the Jmicron RAID Manager will present a dialog box such as
the one shown below, even if it is currently minimized to the system tray:
Phone: 408-453-6212 Email: www.addonics.com/support/query/
10 
						

							Contact Us
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/