AEG Oven BE300366KM User Manual

							ENUser ManualOvenBE300366K    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  PRODUCT DESCRIPTION.............................................................................................. 6
4.  BEFORE FIRST USE......................................................................................................... 7
5.  DAILY USE.......................................................................................................................\
.7
6.  CLOCK FUNCTIONS.................................................................................................... 10
7.  USING THE ACCESSORIES.......................................................................................... 11
8.  ADDITIONAL FUNCTIONS.......................................................................................... 12
9.  HINTS AND TIPS........................................................................................................... 12
10.  CARE AND CLEANING.............................................................................................. 21
11.  TROUBLESHOOTING.................................................................................................25
12.  INSTALLATION........................................................................................................... 26
13.  ENERGY EFFICIENCY.................................................................................................27
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfserviceRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible for any injuries ordamages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities
provided that they have been given instruction and/or
supervision regarding the safe use of the appliance and understand the potential hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of
it appropriately.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, this should
be activated.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
• Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
1.2  General Safety
•
Only a qualified person must install this appliance and
replace the cable.
• WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised.
• Always use oven gloves to remove or put in
accessories or ovenware.
ENGLISH3  
						

							•Before maintenance cut the power supply.
• Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
• If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoid
an electrical hazard.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side walls. Install the shelf supports in the opposite
sequence.
• The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.2.  SAFETY INSTRUCTIONS2.1  InstallationWARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safestructures.
• The sides of the appliance must stay adjacent to appliances or to units with
the same height.
2.2  Electrical connectionWARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains
cable. Should the mains cable need to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or come near the appliance door,
especially when the door is hot.
www.aeg.com4   
						

							• The shock protection of live andinsulated parts must be fastened in
such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
• This appliance complies with the E.E.C. Directives.2.3  UseWARNING!
Risk of injury, burns and
electrical shock or explosion.
• This appliance is for household use only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with wet hands or when it has contact withwater.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface or as a storage surface.
• Open the appliance door carefully.
The use of ingredients with alcohol
can cause a mixture of alcohol and air.
• Do not let sparks or open flames to come in contact with the appliance
when you open the door.
• Do not put flammable products or items that are wet with flammableproducts in, near or on the appliance.
• Do not use microwave function to preheat the oven.WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration to the enamel:
– do not put aluminium foil directly on the bottom of the appliance.
– do not put water directly into the hot appliance.
– do not keep moist dishes and food in the appliance after you
finish the cooking.
– be careful when you remove or install the accessories.
• Discoloration of the enamel has no effect on the performance of the
appliance.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be
permanent.
• This appliance is for cooking purposes only. It must not be used for
other purposes, for example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a furniture panel (e.g. a door) make surethe door is never closed when the
appliance is in operation. Heat and moisture can build up behind a
closed furniture panel and cause
subsequent damage to the appliance,
the housing unit or the floor. Do not
close the furniture panel until the
appliance has cooled down
completely after use.
2.4  Care and cleaningWARNING!
Risk of injury, fire, or damage
to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mainsplug from the mains socket.
ENGLISH5    
						

							• Make sure the appliance is cold.There is the risk that the glass panels
can break.
• Replace immediately the door glass panels when they are damaged.Contact the Authorised Service
Centre.
• Be careful when you remove the door from the appliance. The door is
heavy!
• Clean regularly the appliance to prevent the deterioration of thesurface material.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of
detergent.2.5  Internal light
• The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the appliance from the power supply.
• Only use lamps with the same specifications.
2.6  DisposalWARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of
it.
• Remove the door catch to prevent children or pets from becoming
trapped in the appliance.
2.7  Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
3.  PRODUCT DESCRIPTION3.1  General overview1Control panel2
Knob for the oven functions
3
Electronic programmer
4
Knob for the temperature
5
Plus Steam button
6
Heating element
7
Lamp
8
Fan
9
Cavity embossment
10
Shelf support, removable
11
Shelf positions
3.2 Accessories
• Wire shelfFor cookware, cake tins, roasts.
• Grill- / Roasting panwww.aeg.com6  7
6
11
10
5
4
1
2
3
35
8
9
421  
						

							To bake and roast or as pan to collect
fat.
• Trivet
For roasting and grilling.Use the trivet only with
the Grill- / roasting pan.4.  BEFORE FIRST USEWARNING!
Refer to Safety chapters.4.1  Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
4.2  Setting the time
You must set the time before you
operate the oven.
The indicator for the Time of day
function flashes when you connect the
appliance to the electrical supply, when there was a power cut or when the timeris not set.
Press the 
 or  button to set the
correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
4.3  Changing the timeYou cannot change the time
of day if the Duration 
 or
End 
 function operates.
Press  again and again until the
indicator for the Time of Day function flashes.
To set a new time, refer to "Setting the
time".4.4  Preheating
Preheat the empty appliance to burn off
the remaining grease.
For True Fan Cooking PLUS
function refer to "Activating
the True Fan Cooking PLUS
function".
1. Set the function  and the
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function 
 and set the
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function 
, press  and
set the maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure that the airflow in the room is sufficient.
5.  DAILY USEWARNING!
Refer to Safety chapters.5.1  Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.ENGLISH7                
						

							5.2 Activating and
deactivating the applianceIt depends on the model if
your appliance has lamps,
knob symbols or
indicators:
• The lamp comes on when the appliance operates.
• The symbol shows whether the knob
controls the oven
functions or the
temperature.
• The indicator comes on when the oven heats up.1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the appliance turn the
knobs for the oven functions and
temperature to the off position.5.3  Oven functionsOven functionApplicationOff positionThe appliance is off.LightTo activate the lamp without a cooking function.Top / Bottom
HeatTo bake and roast food on 1 shelf position.Top HeatTo brown bread, cakes and pastries. To finish cooked
dishes.Bottom HeatTo bake cakes with crispy bottom and to preserve food.GrillingTo grill flat food and to toast bread.Fast GrillingTo grill flat food in large quantities and to toast bread.Turbo GrillingTo roast larger meat joints or poultry with bones on 1
shelf position. Also to make gratins and to brown.
 
True Fan Cook-
ingTo bake on up to 3 shelf positions at the same time and
to dry food. Set the temperature 20 - 40 °C lower than
for Top / Bottom Heat.True Fan Cook-
ing PLUSTo add humidity during the cooking. To get the right
colour and crispy crust during baking. To give more
juiciness during reheating.www.aeg.com8            
						

							Oven functionApplicationPizza SettingTo bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Top / Bottom Heat.5.4  Activating the True Fan
Cooking PLUS function
This function allows to have an
improvement of humidity during the
cooking.WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Open the appliance door with care after the True Fan Cooking PLUS
operation.
Refer to “Hints and tips”
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Put food in the appliance and close
the oven door.
4. Set the True Fan Cooking PLUS
function: 
.
5. Press the Plus Steam button .
The Plus Steam button works only
with the True Fan Cooking PLUS
function.
The indicator comes in.
6. Turn the knob for the temperature to
select a temperature. CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
7. To deactivate the appliance, press
the Plus Steam button 
, turn the
knobs for the oven functions and
temperature to the off position.
The indicator of the Plus Steam button
goes out.
8. Remove water from the cavity
embossment. 
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from
the cavity embossment.5.5  DisplayA.Function indicators
B. Time display
C. Function indicatorENGLISH9         A B C  
						

							5.6 ButtonsButtonFunctionDescriptionMINUSTo set the time.CLOCKTo set a clock function.PLUSTo set the time.Plus SteamTo activate the True Fan Cooking PLUS
function.6.  CLOCK FUNCTIONS6.1  Clock functions tableClock functionApplicationTime of dayTo set, change or check the time of day.Minute MinderTo set countdown time. This function has no effect on the op-
eration of the appliance.DurationTo set the cooking time of the oven.EndTo set the time of day when the oven should deactivate.You can use the functions
Duration 
 and End  at
the same time to set the
time for how long the
appliance should operate
and when the appliance
should deactivate. This lets
you activate the appliance
with a delay in time. First set
the Duration 
 and then
the End 
.
6.2  Setting the clock functions
For Duration  and End , set an
oven function and temperature of
cooking. This is not necessary for the
Minute Minder 
.
1. Press 
 again and again until the
indicator for the necessary clock
function starts to flash.
2. Press  or  to set the time for the
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function you set.For the Minute Minder
function the display shows
the time left.
3. When the time ends the indicator of
the clock function flashes and an
acoustic signal sounds. Press a
button to stop the signal.
4. Turn the knob for the oven functions
and the knob for the temperature to the off position.
With the Duration  and
End 
 functions, the
appliance deactivates
automatically.
www.aeg.com10