Aimco Brakes Freedom3 LAB User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 LAB User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 2
2 2 Revision History General Terms All Rights reserved. Specifications are going to change without notice. Trademarks are the property of SCS Concept and their respective owners. SCS Concept reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified...
Page 3
[email protected] 3 Battery information according European regulation 2006/66/CE Part no: 313 21 0042 Type: Li-Ion 3.7V 2600 mAh Weight: 84 g After removed, the wasted battery must be dismissed according local regulation
Page 4
4 4 Revision History Revision History Edition Date Description Firmware Version 1.0 02/04/2012 First Edition V8.2k 2.0 15/02/2013 Second Edition LAB SPC PRW
Page 5
[email protected] 5 Contents USER MANUAL ........................................................................................................................... 1 GENERAL TERMS ................................................................................................................................................................. 2 TERMS OF WARRANTY...
Page 6
6 6 Contents SETUP OF FREEDOM³LAB MODE .......................................................................................................................................... 45 PART NUMBERS ................................................................................................................................................................ 48
Page 7
[email protected] 7 Freedom³ Tour Freedom³ is an Electronic Wrench designed for Quality Control and High Level Tightening on all types of production line. Freedom³ allows to analyze joints displaying torque/time and torque angle graphs. With Freedom³ it’s possible to see any curves and data for every single test directly on the display, showing the main statistical values. Lab version (stand-alone), this firmware version is designed in order to create quality control test...
Page 8
8
8 Freedom³ Tour
SPC Quality Control
Smart Break-away
With Freedom³ is possible to have break-away test directly on production line joints. Thanks to
the new algorithm, to detect the real break-away point is easy and fast for everyone, it’s not more
necessary to be an expert to have break-away test.
Page 9
[email protected] 9 Joint Analysis Freedom³ is developed to satisfy every kind of customer requests. The Joint Analysis function permits to record the complete torque-angle curve and to analyze it directly on the display of Freedom³ in a quick and precise way, in order to understand joint stiffness. Freedom³ LAB mode can send curves to F3 Explorer software, to display and save curves on user’s computer , in this way, users can...
Page 10
10 10 Freedom³ Tour Production Tightening Freedom³ can be programmed to work as an assembly tool on production line. Freedom³ is the perfect solution for assembly station where it’s necessary an high tightening quality or where it’s not possible to use a power-tool for space problem or for typology of joint (as pipe nut). For every single tightening Freedom³ saves data-results, Torque/Time and Torque/Angle curves and sample charts. User can see...