Aimco Brakes Freedom3 PRW Sqnet User Manual

							 
 
   [email protected]     
51  
 
 
Select right “strategy” 
By SQnet FTA is also possible select which strategy Freedom³ has to apply during the execution of 
group considering customer needs. 
 
Count only ok results -> Selecting this strategy, Freedom³ will count to complete the test only “OK” 
results, that means if one test is composed of 3 screws, operator must get 3 ok test to complete it, 
“Not OK” results will be not archived and considered. 
 
In case of error redo the batch -> Selecting this strategy, Freedom³ will count to complete the 
batch (number of screws to tighten with the same strategy) only “OK” results and if one of the 
screws that belong to the same batch will get a “Not OK” result, user must restart the batch from 
the first screw. For example if the batch is composed of 3 screws and the first 2 screws get “OK 
result” but third screw get a “Not OK result” operator must restart the batch from the first screw. 
 
In case of error redo the Job -> Selecting this strategy, Freedom³ will count to complete the job 
(group) only “OK” results and if one of the screws that belong to the same job (group) will get a 
“Not OK” result, user must restart the Hob (group) from the first screw. For example if the job is 
composed of 3 test and every operation is composed of 3 screws, if operator will get a “Not OK 
result” he must restart the complete job (Group) from the first screw of first test. 
 
In case of error redo last operation -> Selecting this strategy, Freedom³ will count to complete the 
operation (number of screws to test for Quality Control) only “OK” results and if one of the screws 
that belong to the same operation will get a “Not OK” result, operator must restart the complete 
from the first screw. For example if the operation is composed of 3 screws and the first 2 screws 
get “OK result” but third screw get a “Not OK result” operator must restart the operation from the 
first screw. 
 
None -> Selecting this option, Freedom³ will count to complete test, batch, job or operation “OK” 
and “Not OK” results. 
 
 
 
 
 
Once the strategy is selected click on “Confirm button” 
 
 
 
 
 
 
 
  
						

							 
52 
 
52 PRW mode working with SQnet FTA 
 
 
 
 
 
 
On the right part of the window “Route Management” will appear the Group created : 
 
 
 
 
 
 
Name of the group and group number [1]  
						

							 
 
   [email protected]     
53  
 
 
 
 
 
 
Under title bar “Group list” there are 3 icons: 
 
ICON FUNCTION 
 
Edit New Group 
 
Modify an existing Group 
 
Delete a Group 
 
  
 
Note: it’s possible to edit more groups inside a route,  
 
To add Control Quality test or Tightening operation in a Group (Job), select the test or the 
operation before added in the route (see paragraph hoe to create a route). 
 
 
Route created previously 
Click on “plus” button to 
open the group  
						

							 
54 
 
54 PRW mode working with SQnet FTA 
 
 
 
 
 
 
Select one by one, test or operation to add to the Group (job) and press “right arrow” button to 
add to the group 
 
 
 
 
In the lower-right corner of the window is possible to: 
 
 
 
Select test or operation to add to the group 
Click on right 
arrow to add the 
selected test to the 
group 
Test already added to 
the group 
Modify Strategy for every 
single test or operation  
Define how many screws 
operator has to tighten or check 
for every tightening operation or 
Quality Control  
						

							 
 
   [email protected]     
55  
Phase nr. field  will be activated only if the “strategy” selected for the test or operation is “=n case 
of error go to another phase”.   
 
 
 
 
 
The phase is the number linked to a test or operation, see below: 
 
 
 
The red highlighted ring is the associate number for test or operation (phase). 
When operator start a group (job) on Freedom³, first test to have will be the test indicates with 
number “1”.  
 
 
 
 
By “Up” and “Down” arrows is possible modify the sequence of the test (changing the sequence 
will be modified the phase number in relation to the position user will assign).   
By “X” icon is possible to remove a test or operation from the group (job). 
 
In case there are more groups (job\s) inside a route on the bottom of Group window will appear 
the list of all group that belong the route created. Click on plus button to see which operation or 
test are inside every single group. 
  
						

							 
56 
 
56 PRW mode working with SQnet FTA 
 
 
 
 
 
Once route and job\s are created is possible to send it to Freedom³, close the window “route 
management” and automatically SQnet will save the route and groups. 
 
See next paragraph for sending route to Freedom³. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							 
 
   [email protected]     
57  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
How to send a route to Freedom³ PRW 
 
STEP -1- 
Before to send a route to Freedom³ user has to connect USB cable  
 
 
             
        
          
        
       
        
  
 
 
 
 
 
 
STEP -2- 
Once USB cable is connected to computer and Freedom³, switch on Freedom³ and from the main 
page select “Synchronize” icon. 
USB CABLE  
						

							 
58 
 
58 PRW mode working with SQnet FTA 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
STEP -3- 
 
A new window will appear, touch the button “USB/Radio” to start the synchronization: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Subsequently  user must confirm synchronization, pushing confirm button on Freedom³ keyboard: 
  
						

							 
 
   [email protected]     
59  
  
 
 
 
 
 
 
 
 
 
 
After selection, Freedom³ will start the synchronization modality: 
 
 
 
 
The wrench is waiting for communication with SQnet. 
 
 
  
						

							 
60 
 
60 PRW mode working with SQnet FTA 
STEP -4- 
On PC, in the SQ-Net main page, click on Freedom³ interface (PROD) icon: 
 
 
 
 
 
 
STEP -5- 
A new window appears: 
 
Select Route