Aimco Brakes Freedom3 SPC Sqnet User Manual

							 
 
   [email protected]     
71  
After clicking, Freedom³ will wait for SQ-Net communication: 
 
 
  
 
 
 
 
 
 
 
 
STEP -3- 
On PC, in the SQ-Net main page, click on Freedom³ SPC interface icon: 
 
           
           
						

							72 
 
Freedom³ interface window will appear: 
         
 
 
 
See below for the meaning of icons: 
 
ICON FUNCTION 
 
Edit New Freedom³ 
 
Modify Freedom³ 
 
Delete Freedom³ 
 
Receive data from Freedom³ 
 
Send route to Freedom³ 
 
 
 
 
 
  
						

							 
 
   [email protected]     
73  
STEP -4- 
 
 
Click on   
 
 
 
=t will be appear “Add new Freedom³” window: 
 
 
 
 
User must write Freedom³ serial number (if user writes a wrong s/n, the communication will fail).  
“Notes” is not a obligatory field. 
 
Confirm  to save and exit to “Freedom³ interface window” 
Select the Freedom³ added 
 
 
 
 
 
 
 
  
 
 
 
 
  
						

							74 
 
Select the route to send to Freedom³ from the combo box: 
 
 
 
            
 
 
Click on send   
            
         
         
   
 
 
    
 
On the right part of the window will appear the 
communication between SQ-Net and Freedom³. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When the route is sent, at the end of log appear 
the message “Data sending complete”  
        
    
Note: =f the message “Data sending complete” don’t appear, please check USB cable connection, 
and verify the s/n of Freedom³ 
 
  
						

							 
 
   [email protected]     
75  
STEP -5- 
After route is sending press “ESC” button on Freedom³: 
 
             
             
             
             
             
      
 
ESC 
 
 
 
 
 
 
 
 
 
 
 
 
Then Freedom³ will restart, after few seconds on the display will appear the message “route 
imported”: 
 
 
      
      
  
 
 
 
 
 
 
 
 
 
 
Press Ok button to continue. 
  
						

							76 
 
How to send a route to Freedom³ PRW 
 
STEP -1- 
Before to send a route to Freedom³ user has to connect USB cable  
 
 
             
        
          
        
       
        
  
 
 
 
 
 
 
STEP -2- 
Once USB cable is connected to computer and Freedom³, switch on Freedom³ and from the main 
page select “Synchronize” icon. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
STEP -3- 
USB CABLE  
						

							 
 
   [email protected]     
77  
 
A new window will appear, touch the button “USB/Radio” to start the synchronization: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Subsequently  user must confirm synchronization, pushing confirm button on Freedom³ keyboard: 
 
  
 
 
 
 
 
 
 
 
 
  
						

							78 
 
After selection, Freedom³ will start the synchronization modality: 
 
 
 
 
The wrench is waiting for communication with SQnet. 
STEP -4- 
On PC, in the SQ-Net main page, click on Freedom³ interface (PROD) icon: 
 
 
 
 
 
 
  
						

							 
 
   [email protected]     
79  
STEP -5- 
A new window appears: 
 
 
Using the combo box highlighted in the screenshot, select the route to send to Freedom³. 
 
 
 
STEP -6- 
Once selected the route, all the operation that belong to the route will appear in the window: 
 
 
 
 
 
Click on the “green arrow” to send the route to Freedom³ PRW 
Note: the “green arrow” is used to receive data-results also. 
Select Route  
						

							80 
 
 
 
STEP -7- 
 
On the right side of the window (Freedom³ interface PROD), user can see the status of data 
transfer. 
 
 
 
 
 
 
 
 
 
 
 
 
When Freedom³ finishes to receive the route on the last row of “Logs” window will appear the 
message “Data sending completed” (see above the picture ). 
 
 
STEP -8- 
After the message “Data sending completed” is appeared on “Logs” windows, it’s possible press 
“ESC” button on Freedom³. 
The wrench will restart automatically in synchronization menu: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Press “Exit” to go back to main menu. 
 
Now Freedom³ is ready to work with route. See paragraph “:ow to run test from route - Freedom³ 
PRW” to execute test or tightening program.