Aimco Brakes Nutrunner FSeries Main Unit Manual

							
5.1.5  VIEW OPERATION 
 
Select View (V) from menu bar and below mentioned pull down menus appear. 
 
 
 
Tool Bar Set tool bar size. 
Key Pad Set key pad size. 
View 
Status Bar Select display or not of status 
bar display. 
 
5.1.6  SECURITY SETTING OPERATION 
 
Select Security (S) from menu bar and below mentioned pull down menus  
appear.   
 
 
Log On Input password. Security 
Operation History Displays history of setting 
value adjustment. 
 
 - 21 -  
						

							
5.1.7  PARAMETER COMMUNICATION OPERATION 
 
Select Communication (C) from menu bar and below mentioned pull down 
menus appear. 
 
 
 
Communication Units Communicates with main unit. 
 
 
5.1.8  Configuration SETTING OPERATION 
 
Select Configuration (O) from menu bar and below mentioned pull down menus  
appear.   
 
 
 
Software Configuration Input password and soft 
version 
Configuration 
Software Version will appear. 
 
 
 - 22 -  
						

							
5.1.9  WINDOW SETTING OPERATION 
 
Select Window (W) from menu bar and below mentioned pull down menus 
appear. 
 
 
 
Cascade Displays all in the piled up 
form. 
Vertical Displays all in the vertical 
order. 
Horizontal Displays all in the horizontal 
order. 
Window 
Close All Windows Close all windows. 
 
 - 23 -  
						

							
5.2 F-TYPE NUTRUNNER SYSTEM USERS’ CONSOLE BASIC OPERATION 
 
[Basic operation of users’ PC] 
① Start windows and get F-Type nutrunner system users’ console started. 
② Initial display appears on PC screen. 
2-1. See initial display screen. 
③ Confirm connections users’ console, main unit and spindle unit. 
2-2. See system setting screen. 
④ Read setting data available with main unit and spindle unit. 
2-3. Use READ of parameter communication screen (1). 
⑤ Check individual parameter setting. 
Edit individual parameter on this screen. 
2-4. See parameter screen. 
⑥ Transmit as above edited parameter to main unit or to spindle unit. 
2-5. See TRANSMIT communication screen of parameter (2) 
⑦ Verify and edit other setting values. 
Read F-Type nutrunner system user console for the details. 
 
5.2.1 INITIAL DISPLAY SCREEN 
Connect F-type main unit controller and PC by a PC cable.  Click an icon 
of F-type nutrunner system user console and the following screen will appear. 
 
 - 24 -  
						

							
5.2.2 CONFIGURATION SETTING SCREEN 
Select Configuration (O) from menu bar and below mentioned display will 
appear. 
5.2.2.1 User console setting 
① Communication port setting 
Make communication port setting F-type nutrunner unit and PC. 
 
Click items that you are going set. 
 
 
5.2.2.2 Station setting 
   Select STATION and below mentioned display will appear. 
① Names of stations 
Name and input station name of F-type nutrunner. 
(Station name can be omitted.) 
 
 - 25 -  
						

							
5.2.3 COMMUNICATION SCREEN OF PARAMETER 
This is to have a screen that you will read setting data of main unit and spindle 
unit.  Select Configuration (O) [SPINDLE UNIT] and below mentioned display 
will appear. 
 
5.2.3.1 Parameter communication screen 
① Search spindle unit 
Click SPINDLE SEARCH and the connected spindles will be checked. 
② Check READ items you are going to read 
Select READ of setting value. 
③ Read Spindle data and Main unit data 
Click READ and values of spindle unit and main unit will be displayed on PC 
screen. 
 
 - 26 -  
						

							
5.2.4 PARAMETER SETUP SCREEN 
This screen is to verify or edit tightening parameter value.  Select Setup  (S) 
and below mentioned parameter display will appear. 
 
5.2.4.1 Parameter setup screen 
Verify or edit parameter what has been already set. 
 
(1) Tool type setup screen 
Verify or edit tool type what has been already set. 
 
 
(2) CAL value setup screen 
Verify CAL value of connected tool or edit it. 
 - 27 - 
  
						

							
(3) Manual reversing speed setup screen 
Verify pre-set manual reversing speed or edit it. 
 
 
(4) Tightening repetition setup screen 
Verify pre-set tightening repetition or edit it. 
 
 - 28 -  
						

							
 
(5) MODE setting screen 
Verify pre-set tightening sequence or edit it. 
 
 - 29 -  
						

							
5.2.5. PARAMETER COMMUNICATION SCREEN (2) [DATA WRITING] 
Transmit (write) setting data to spindle unit and main unit. 
 
Select Communication (C) [SPINDLE UNIT] from menu bar and below 
mentioned display will appear.  This is the same as PARAMETER 
Communication SCREEN (1) [DATA READING]. 
 
TRANSMISSION (WRITING) 
① Search spindle unit 
Click SPINDLE SEARCH and the connected spindles will be detected. 
② Check items to write 
Select setting value items that you are going to write. 
③ Write tightening setting of spindle unit and main unit 
Click TRANSMIT and your PC will transmit setting value to spindle unit and 
main unit. 
※ In case that you transmit parameter setting values, be sure to select 
SPINDLE CUT at the time of download, or do the transmission after 
selecting SPINDLE CUT by individual spindle’s manual SPINDLE CUT 
switch. 
 
 
 
 - 30 -