Alarm Lock DL2700 Enhanced Instructions OI209A 100 users User Manual

1 
CONGRATULATIONS!    
Your new Alarm Lock Trilogy electronic digital lock is a rugged entry lock 
of advanced design with several programmable features.  Three security 
levels are provided:  Master (can perform ALL functions), Manager (can 
perform MOST functions plus entry), and Basic User (entry only).   
 
The lock includes 100 User Codes (consisting of Managers and Basic  
Users), plus three one-time entry Service Codes.  The Manager/Basic 
User Codes are organized similar to a grid--ten banks of...

2 
Quick Start 
First Time Start Up 
1.  Unpack the lock from its factory packaging.  
2.  With the batteries disconnected, hold down the 5 key (or any numeric key) for 10 seconds and release. 
3.  Connect the batteries and--within 3 seconds--press and hold the 
; button.  After hearing 6 beeps, release 
the 
; button.  Wait 5 seconds for lock to re-lock (listen for 1 beep and red LED).  This will clear the lock of 
all programmed data, and the lock is now ready to accept programming.  Note:  Failure to...

3 
Quick Start (cont’d) 
Enter a Manager Code 
Manager Codes are located at locations 00, 10, 20, 30, 40, 50, 60, 70, 80, and 90 (see grid on page 4).  
Note:  
New Manager Codes MUST use the same number of digits as the (new) Master Code.  Enter as follows.   
1.   Press the (new) Master Code. 
2.   Press 
; [press a Manager location i.e. 00, 10, 20, 30, 40, 50, 60, 70, 80, or 90] ;.  
3.  Press a new Manager Code using the same number of digits as the (new) Master Code
.  A 6-beep acknowl-
edgement...

4 
The DL2700 lock provides three security levels:  
Master (can perform ALL functions), 
Manager (can perform SOME program-
ming functions plus entry), and 
Basic User (entry only).  In total, there are 104 locations inside the DL2700 lock:  one Master 
Code, 10 Manager and 90 User Access Codes, and three one-time entry Service Codes.  Where the Access Code is located 
will determine its security level.  From the factory, all locations (except for the Master Code) are empty; each location can then be...

5 
User Access Codes allow access only; Manager Codes allow more:  Manager Codes have the ability to program and delete 
User Access Codes within that Managers Bank (column).  The DL2700 lock can hold up to 10 Manager Codes, one for 
each Bank (locations (00), (10), (20), (30), (40), (50), (60), (70), (80), (90)), and are all found at the top row of the grid be-
low.  
Note:  Only the Master Code can add or delete a Manager Code. 
 In addition, Managers not only possess programming abilities for User...

6 
Programming Worksheet:  Functions 
FUNCTION PRESS THESE BUTTONS ON KEYPAD 
Change Existing Master Code [Enter Factory or Existing Master Code] ;1;
 [Enter New Master Code 
_ _ _ _ _ ] ;
  
[Re-enter New Master Code _ _ _ _ _ ] [6 beeps = OK] 
Add/Change Manager Codes (up to 10) [Enter Master Code] ;
 [Enter 2-digit Manager Location _ _ ] ; 
      [Enter new Manager Code 
_ _ _ _ _ ] [6 beeps = OK] 
Add/Change User Codes (up to 90) Press Master or Manager Code ;
 [Enter 2-digit Location _ _ ] ;
 [Enter...

7 
Change Existing Master Code*  ;
 1
 ; 
[ __ __ __ __ __ ]
   ;
 1
 ;     [ __ __ __ __ __ ] ;    [ __ __ __ __ __ ] 
Old (or Factory) Master Code                                           New Master Code*                   Confirm New Master Code* 
For new locks, follow the Quick Start on page 2. 
Programming Functions 
* Once the number of digits is selected, it cannot be changed unless all programming is erased and the Factory Default settings are re-loaded 
(power must be removed and re-applied as...

8 
Programming Functions (contd) 
Disable All:  If Master Code is used, disables all 100 User\Manager Codes and clears all 3 Service Codes.  If 
a Manager Code is used, disables all Users (even across multiple Banks) under that Manager.   
Disable Users Only:  If Master Code is used, disables all 90 Users and clears all 3 Service Codes, while Manag-
ers remain active.  If a Manager Code is used, disables all Users (even across multiple banks) under that Man-
ager. 
Enable All:  If Master Code is used,...

9 
[ __ __ __ __ __ ]   ;
 301
 ;   [ __ __ __ __ __ ]  
   Master/Manager Code**                                                                      New Service Code 
Service Codes are one-time-only Codes; once entered into the keypad, it is deleted.  Use the same Code up 
to 3 times by programming all three Service Codes with the same Code.  Note:  Service Codes are lost if 
power is removed.  To delete a single Service Code, press 
;, enter Service Code number (301, 302 or 
303), then press 
; :....

10 ** Required only if DL2700 is locked. 
Program the functions below to activate the Auxiliary Relay on any numeric keypress (Function 201), or when 
the DL2700 is unlocked (Function 202).  In either case the Aux Relay will be active for the duration 
programmed in Pass Time.  See page 2 for information regarding the wiring of AUX leads.
 
AUX Relay Functions  
Disable AUX Relay Function [ __ __ __ __ __ ]     ; 2 0 0 ; 
           Master Code**            
AUX Relay on Any First Keypress (0-9) [ __ __...