Alarm Lock DLWindows v360 User Guide New

31 
The Lock Data screen is used to view User Codes, Group Associations and Program Levels inside individual locks.  
Also called User Access Codes or PIN No. Codes, User Codes are 
numbers the User enters into the lock keypad to unlock the lock or device.  
User Codes are entered via the Global Users screen.  Administrators can 
hide this column by pressing the Hide Pins button.  This column is hidden for 
all other users (non-Administrators). 
This is the User Number inside the lock that determines the...

32 
Click to close the Event Log Viewer screen. 
Click to send to your default printer the displayed data inside columns 
and rows listed in the Event Log Viewer screen.  Only those records 
displayed (specified in the Maximum Event Log Length) will be 
printed.
 
Click the Export Log button and two selections appear (as shown 
below):  You can click either Export Log to Text File or Export Log to 
CSV File.   
 
 
 
 
 
If you click Export Log to Text File, the log will be saved in the form of 
a .txt...

33 
A Group 2 User will put door into passage mode (lock is unlocked).  A 
Group 3 User will take door out of passage.  Caution!  The consequences 
of accidentally selecting this option can cause a security breach!  (Not 
applicable to the DL2800/DL3000). 
A Group 2 User will toggle passage mode (lock is unlocked).  Caution!  
The consequences of accidentally selecting this option can cause 
a security breach!  (Not applicable to the DL2800/DL3000). 
The lock will adjust for Daylight Saving Time....

34 
The Programmable Features screen, Options tab will vary depending the lock model, as shown below.  Some locks require either DST be disabled 
or customized, other locks also allow the selection of pre-set DST modes for the varied DST adjustments throughout the world.  See below for details 
regarding the Custom DST button and customizing the DST start and end dates.  In addition, see below for a list of Locks and firmware versions that 
support the new Daylight Saving Time feature. 
⇒For version...

35 
Relay will activate when lock is unlocked.  Relay power must be 
provided from an external power supply.  If Relay follows Lock/Unlock 
Status is selected, the relay will remain activated as long as the door is 
unlocked.  This feature supersedes all other relay options. 
Will activate relay if the lock has been unlocked by a programmed 
schedule. 
The Features screen is used to program Relay Functions and other programmable Features.  If programmed, one or more of the following relay 
Functions will...

36 
Checking this box will cause the lock to unlock when a short is 
maintained across the remote input.  The lock will remain unlocked until 
the next User Code entry, at which time the lock will lock. 
Checking this box will cause the lock to lock when a short is maintained 
across the remote input.  The lock will remain locked until the next User 
Code entry, at which time the lock will return to Passage Mode.   
For use with DL-WINDOWS software.  The remote input will act as User 
298 or keypad...

37 
PDL4100/DL4100 & PDL4500/DL4500 
Privacy and Residency Features 
 The 4100 series locks leave the factory as Privacy locks, with the below Privacy Mode as the default program.  If you wish, 4100 series locks 
can be re-programmed as Residency locks (see below, Residency Mode).  The following provides basic descriptions of the two modes.  For 
more information, see WI1194 and/or WI1195. 
 
The 4500 series locks leave the factory as Residency locks, with the below Residency Mode as the default program....

38 
This screen consists of two parts--the TimeZones area (top) and the Schedule Entry area (bottom).  The TimeZones area is used to program the 
time the event(s) will occur, and the Schedule Entry area is used to create events that can be linked to the times created in the TimeZones area.  
This page will focus on the TimeZones area.  See next page for the Schedule Entry area.
 
All, January - December 
The Day column cannot be altered.  Select the day by clicking the day 
desired under the Enable...

39 
An Event Number is assigned to each scheduled event.  Up to 500 
events can be scheduled for the DL3500 and PDL3000 locks, and 150 
events for the DL3000.  This number is displayed for reference only. 
Any text description of each scheduled event can be entered.  Up to 30 
characters are allowed.  Displayed for reference only. 
This is the Group or User Number associated with the scheduled event.  
If the event is associated with a Group, valid entries are 1 to 4.  If the 
event is associated with a...

40 
The Schedule View screen combines the times created in the Schedule-TimeZone screen.  The Schedule View screen displays schedules (with 
their event time information) listed in separate rows.  In addition, schedules received from locks are viewed only in the Schedule View screen. 
Notes on the Schedule View screen  
The Schedule View screen is defaulted as a read-only screen.  Editing events from this screen is not recommended. 
 
Note:  If a lock with a program created through keypad programming is...