Alarm Lock Door Alarms PG21 Installation Template User Manual
Have a look at the manual Alarm Lock Door Alarms PG21 Installation Template User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MAGNETIC ACTUATOR INSTALLATION TEMPLATE--PG21 SERIES USE RIGHT SIDE OF PAGE FOR OUTSWINGING DOORS AS SHOWN IN THE TOP VIEW BELOW (NOTE LOCATION OF HINGE). PG21 DOOR MAGNETIC ACTUATOR HINGE PG21 SERIES FOLD UP ALONG THIS LINE & PLACE AGAINST EDGE OF DOOR FOLD UP ALONG THIS LINE & PLACE AGAINST EDGE OF DOOR 3/8 © ALARM LOCK 2003 AL ARM LOCK 345 Bayview Avenue, Amityville, New York 11701 WI1210A 9/03 USE LEFT SIDE OF PAGE FOR OUTSWINGING DOORS AS SHOWN IN THE TOP VIEW BELOW (NOTE LOCATION OF HINGE). MAGNETIC ACTUATOR PG21 DOOR HINGE 3/8 (OPTIONAL--DO NOT DRILL THIS HOLE EXCEPT FOR EXTERNAL W IRING) (OPTIONAL--DO NOT DRILL THIS HOLE EXCEPT WHEN INSTALLING A RIM CYLINDER) !Holes for Baseplate mounting screws. Use 1/8 bit (0.125). Drill 1 deep. !Holes for Baseplate mounting screws. Use 1/8 bit (0.125). Drill 1 deep. Magnetic Actuator location is shown for reference purposes only. For correct Magnet Actuator location, use either (1) the location references printed on the red stickers on the side of the PG21 cover, (2) Mag- net Alignment Mode or (3) place the Magnetic Actua- tor 1½ from the bottom edge of the Baseplate. For mounting hole sizes and depths, see reverse. NOTE: The Baseplate must be mounted far enough away from the edge of the door to prevent unit from striking the door jam. MAGNETIC ACTUATOR JAM JAM Magnetic Actuator location is shown for reference purposes only. For correct Magnet Actuator location, use either (1) the location references printed on the red stickers on the side of the PG21 cover, (2) Mag- net Alignment Mode or (3) place the Magnetic Actua- tor 1½ from the bottom edge of the Baseplate. For mounting hole sizes and depths, see reverse.
MAGNETIC ACTUATOR MAGNETIC ACTUATOR INSTALLATION TEMPLATE--PG21 SERIES © ALARM LOCK 2003 AL ARM LOCK 345 Bayview Avenue, Amityville, New York 11701 WI1210A 9/03 USE LEFT SIDE OF PAGE FOR DOORS SHOWN IN THE TOP VIEWS BELOW USE RIGHT SIDE OF PAGE FOR DOORS SHOWN IN THE TOP VIEWS BELOW !Holes for Baseplate mounting screws. Use 1/8 bit (0.125). Drill 1 deep. PG21 SERIES 3/8 3/8 (OPTIONAL--DO NOT DRILL THIS HOLE EXCEPT FOR EXTERNAL W IRING) (OPTIONAL--DO NOT DRILL THIS HOLE EXCEPT WHEN INSTALLING A RIM CYLINDER) FOLD UP ALONG THIS LINE. PLACE ON DOOR AND DOOR JAM FOLD UP ALONG THIS LINE. PLACE ON DOOR AND DOOR JAM !Holes for Baseplate mounting screws. Use 1/8 bit (0.125). Drill 1 deep. Use 1/8 bit (0.125). Drill 1 deep. Use 1/8 bit (0.125). Drill 1 deep. Use 1/8 bit (0.125). Drill 1 deep. Use 1/8 bit (0.125). Drill 1 deep. (Double Doors) (Double Doors) (Double Doors) (Double Doors) NOTE: Both the Baseplate and Magnetic actuator can be mounted close to the edge of the door and door jam.