Alarm Lock Infrared Wireless Printer Operation Instructions User Manual

							Introduction 
The AL-IR1 is optically linked to the T3/T3E Series Locks via 
infrared light.  It is used for reading the various reports main-
tained by the locks, including the Audit Log. 
 
Specifications 
•Dimensions:  3½ W x 7L 
•Interface:  Infrared Light Beam 
•Activation:  Refer to Lock Instructions 
•Distance:  1 to 4 above the infrared LED 
•Controls:  3 (Power On/Off, printer Contrast and Paper Feed) 
•Paper:  Uses common 2¼ thermal paper available at most 
office supply stores (supplied) 
•Batteries:  4 AA 1.5 volt alkaline batteries (supplied)  
•AC Adapter (Optional):  9-12V AC or DC 500-1500mA, 
Hewlett Packard HP82241A or equivalent 
AL-IR1 
WIRELESS PRINTER 
OPERATION INSTRUCTIONS 
OI233B  9/04 
 
Operation 
!
Turn on the printer. 
!Activate printer mode on lock (see lock instructions).  
!Place AL-IR1 approximately 1 to 4 above the infrared 
LED (as shown in image). 
!Turn off the printer when not in use. 
 
NOTE:  Press the Paper Advance button or turn off the 
printer and on again, if printer has been not been in use for a 
long time.   
AC 
Adapter 
(Optional) 
Paper Compartment 
Thermal 
Print Head 
On/Off 
Print  
Contrast 
Paper 
Advance 
Power ON 
Indicator 
Light 
Infrared 
LED 
Infrared 
Receiver 
AL-IR1 to DL3000 (side and front views) 
Optical 
Receiver 
345 Bayview Avenue 
Amityville, New York 11701 
For Sales and Repairs 1-800-ALA-LOCK 
For Technical Service 1-800-645-9440 
 Publicly traded on NASDAQ             Symbol: NSSC 
© ALARM LOCK 2004  
						

							•Do not operate printer without paper.  For best results, use HP 82175 black-printing thermal paper.   
•Do not pull on paper — use the ▲ button.   
•Do not pull paper backward through printer.   
•Do not run paper to end of roll if paper is attached to its inner core (HP paper is not attached). 
Loading Paper 
Tear or cut paper evenly. 
Do not use paper with folds or uneven 
edges.  Do not allow obstructions to 
contact the print mechanism. 
Open door. 
Position paper in door as shown. While pushing paper into slot, hold down the 
▲ button until paper emerges.  If paper jams, 
pull backwards VERY slowly.   Place paper in compartment.  Close door.