AOC 2230fm User Manual

5. Picture Boost  
 
Picture Boost  
Adjust Range  
Description  
 
Bright Frame  
on or off  
Disable or Enable Bright Frame  
 
Frame Size  
14-100  
Adjust Frame Size  
 
Brightness  
0-100  
Adjust Frame Brightness  
 
Contrast  
0-100  
Adjust Frame Contrast  
 
H. position  
0-100  
Adjust Frame horizontal Position 
 
V.position 
0-100  
Adjust Frame vertical Position 
 
Reset  
  
Reset the menu to default  
  
Remarks:  
1) Only when Bright Frame is set to “on”, the other  5 items can be...

6. Setting  
 
 
   

7. Extra  
 
 
   

8. Help  
 
On this page, you can find the information of the m onitor . W elcome to link our website and send email  to us if you have any problem.  
Compatibility :   
i-Menu supports major graphic cards of ATI, N vidia,  Intel, VIA(S3). Please contact with us if your graphic card was not supported i-Menu software.  
                 
  

DMP Function（
（（
（
Digital Media Player ）
））
）
 
 
 Pls follow up the steps below and start your DMP f unction . 
  
1 ,   Input Interface:    
1) 4 in 1 memory card x1:   Support SD / MMC / MS /  xD memory cards  
2)  USB host        
2,   Support file format :   
     Photo : *.jpg, *.bmp, *.png, *.gif  *.tiff   
     Audio : *.MP3, *.W MA , *.W AV   
     Video : *.mpg, *.dat, *.avi, *.rm ,  *.rmvb   
3,  Operation guide :   
1) ,   Key  button Introduction :    :  Sel –    :  Sel +  :  E xit  : Enter...

 
  
2)    Operation guide with key button 
  
Turn on the monitor .  
 
Incert one of the cards (SD/MS/MMC/XD) into the 4-i n-1 slot or USB Host .  
 
press
 button to activate the OSD source menu .  
 
press 
button continuously untill  DMP function is selecte d , then press the Power button to enter into DMP i nterface .  
 
In DMP main interface ， press 
or 
 for function selection .  
 
Press 
button to enter into the sub-menu for input selecti on .  
 
Press
button to enter into the file...

5. Drivers
 
Windows 2000
 
1. Start W indows® 2000   
2. Click on the Start button, point to Settings , and then click on Control Panel.  
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advance d....  
5. Select Monitor  
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation.  
- If the Properties button is active. C lick on P roperties button. Please follow the steps given be low.  
6. Click on Driver and then...

Windows XP
 
1. Start W indows® XP   
2. Click on the Start button and then click on C ontrol Panel.  
3. Select and click on the category Printers and O ther Hardware  
4. Click on the Display Item.  
5. Select the Settings tab then click on the Adv anced button.  
6. Select Monitor tab 
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation. 
- If the Properties button is active, click on P roperties button. 
Please fo llow the steps below.  
7....

6. Technical Support Frequently Asked Questions
 
Problem & Question
 
Possible Solutions
 
Power LED Is Not ON 
 
Make sure the power button is ON and the Power Cord  is properly connected to a grounded power outlet and to the monitor.  
No Plug & Play 
 
In order for the Plug & Play feature of the monitor  to work, you need a Plug & Play compatible computer & video card.  Check with your computer ma nufacturer. Also check the monitors video cable and make sure none of the pins are bent.  
 
Make...

7. Product Information   
Specifications 
LCD Panel  
Model number  
2230Fm 
Driving system  
TFT Color LCD  
Viewable Image Size 
558.68mm diagoanl 
Pixel pitch  
0.282mm(H) x 0.282mm(V) 
Video  
R, G, B Analog lnterface & Digital Interface, HDMI  
Separate Sync.  
H/V TTL 
Display Color  
16.7M Colors  
Dot Clock  
165 MHz  
Resolution  
Horizontal scan range  
31 kHz - 83 kHz 
Horizontal scan Size(Maximum)  
473.76mm  
Vertical scan range  
56 Hz - 76 Hz  
Vertical scan Size(Maximum) 
296.1mm...