Apple macbook 13 inch aluminum late 2008 User Manual
Have a look at the manual Apple macbook 13 inch aluminum late 2008 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 171 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive • Bottom case • Mid wall • Camera cable guide • Optical drive Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick Hard Drive Connector Cable
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 172 2010-06-15 Removal 1 Pull straight up on connector to disconnect cable. 2 Peel up cable from top case.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 173 2010-06-15 3 Lift up adhesive tab. 4 Twist strain relief out of top case. Replacement 1 Peel adhesive backing off cable. 2 Press cable so it lays flat in top case. 3 Connect cable to • logic board • top case • hard drive
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Fan 174 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Fan
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Fan 175 2010-06-15 Removal 1 Use black stick to disconnect fan cable. 2 Remove 3 screws: • 1 (7-mm) 922-8645 • 2 (5-mm) 922-8644 Caution: Do not touch heatsink: Replacement Note: Install screws in order shown. 3 Tilt up fan.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Keyboard Flex Bracket 176 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver Keyboard Flex Bracket
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Keyboard Flex Bracket 177 2010-06-15 Removal 1 Remove 2 (5-mm) 922-8644 screws. 2 Lift out bracket.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 178 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Mid wall • Keyboard flex bracket Trackpad Kit 922-9014 includes: • trackpad • black label • 2 metal flexures • 6 tri-lobe #00 screws • 1 tri-lobe #0 set screw Tools • ESD wrist strap and mat • Sticky (Post-It) notes • Black stick • Large tri-lobe #0 screwdriver (922-8991) • Small tri-lobe #00 screwdriver (922-9013) • Magnetized Torx T5 screwdriver Trackpad
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 179 2010-06-15 Removal 1 Disconnect trackpad flex cable from logic board. 2 Remove 6 small tri- lobe #00 screws from flexures. 3 Remove 1 large tri- lobe #0 set screw. 4 Dispose of old screws; they lose their ability to hold securely if reused.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 180 2010-06-15 5 Hold trackpad and press down on edge closest to logic board. 6 Slide trackpad down and back towards keyboard to clear supports in front edge of top case.