Home > Apple > Personal Computer > Apple power mac g4 agp graphics User Manual

Apple power mac g4 agp graphics User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple power mac g4 agp graphics User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 89
    1. Remove the four screws 
    that attach the drive 
    carrier to the chassis.  
    						
    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 90
    2. Supporting the bottom of 
    the carrier, slide it back 
    and rotate it so you can 
    reach the drive cables.
      
    						
    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 91
    3. Carefully detach the 
    ribbon cable tape from 
    the top of the carrier.
    4. Disconnect the following 
    cables from the back of 
    the CD/DVD/Zip drives:
    ¥ribbon cable from the 
    CD/DVD and Zip drives
    ¥power cable (P6) from 
    the CD/DVD drive
    ¥power cable (P7) from 
    the Zip drive
    5. Remove the carrier and 
    drives from the 
    computer. 
    						
    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 92
    6. Slide the Zip drive 
    carrier off the main 
    carrier. 
    						
    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 93
    7. Using a Phillips 
    screwdriver, remove 
    the four Zip drive 
    mounting screws.
    8. Slide the drive out of the 
    carrier. 
    						
    							 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 94
    Replacement Note: When 
    inserting the drive carrier 
    into the computer, make 
    sure the pegs on the bottom 
    of the carrier fit into the 
    two notches in the drive 
    shelf. 
    						
    							 Take ApartCD/DVD Bezel, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio  -   95
    CD/DVD Bezel, PCI/
    AGP Graphics/Gigabit 
    Ethernet/Digital Audio
    Before you begin, open the 
    side access panel. 
    						
    							 Take ApartCD/DVD Bezel, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio  -   96
    1. From inside the chassis, 
    behind the front panel, 
    push the two bezel tabs 
    forward to release the 
    drive bezel from the 
    front panel. 
    2. Disconnect the bezel 
    from the hinges on the 
    front left side and 
    remove the bezel from 
    the computer. 
    						
    							 Take ApartCD/DVD Drive, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio  -   97
    CD/DVD Drive, PCI/
    AGP Graphics/Gigabit 
    Ethernet/Digital Audio
    Before you begin, do the 
    following:
    ¥ Open the side access 
    panel.
    ¥ Remove the CD/DVD drive 
    bezel. 
    						
    							 Take ApartCD/DVD Drive, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio  -   98
    Note: You remove the drive 
    carrier from the computer 
    with the drives attached to 
    the carrier.
    1. Remove the two screws 
    on the drive carrier. 
    2. From inside the chassis, 
    push the drive carrier 
    forward about 1 inch.
    Important:  The  carrier  may 
    be difficult to push forward 
    due to EMI tape on the 
    carrierÕs underside holding 
    it in place. Continue pushing 
    forward until the carrier is 
    released. 
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple power mac g4 agp graphics User Manual