Home > Apple > Personal Computer > Apple power mac g4 agp graphics User Manual

Apple power mac g4 agp graphics User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Apple power mac g4 agp graphics User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 293
    Add page 181 to Favourites
    image text
    Enable zoom 
    							 Take Apart Rear Vented Panel  -   159
1. Open the side access 
panel.
2. Remove the three 2.5 
mm Allen screws.
3. Push in on the six tabs to 
release the panel from 
the chassis.
    Add page 182 to Favourites
    image text
    Enable zoom 
    							 Take Apart Rear Vented Panel  -   160
4. Once the tabs are 
released, carefully pull 
the rear panel forward 
to remove.
    Add page 183 to Favourites
    image text
    Enable zoom 
    							 Take ApartLatch Panel -  161
Latch Panel
Before you begin, remove 
the following:
¥ video card
¥ PCI cards (if present)
¥ Power Mac G4 (PCI 
Graphics): FireWire 
board (if present)
¥ Power Mac G4 (PCI 
Graphics): modem (if 
present)
¥ AirPort card (if present)
¥ logic board
    Add page 184 to Favourites
    image text
    Enable zoom 
    							 Take ApartLatch Panel -  162
1. Remove the four Phillips 
screws holding the panel 
to the chassis. 
2. Slide the panel toward 
the hard drives, freeing 
the latch panel from the  
tabs on the chassis.
Note:  Circles  indicate 
tab locations.
3. Remove the latch panel.
    Add page 185 to Favourites
    image text
    Enable zoom 
    							 Take Apart Right Side Access Panel  -   163
Right Side Access 
Panel
Before you begin, remove 
the following:
¥ PCI cards (if present)
¥ video card
¥ FireWire board (if 
present)
¥ modem (if present)
¥ AirPort card (if present)
¥ logic board
    Add page 186 to Favourites
    image text
    Enable zoom 
    							 Take Apart Right Side Access Panel  -   164
1. Remove the four 2.5 mm 
Allen screws on the side 
panel.
    Add page 187 to Favourites
    image text
    Enable zoom 
    							 Take Apart Right Side Access Panel  -   165
2. Open the side access 
panel.
3. Remove the two Phillips 
screws attaching the 
right side panel to the 
metal chassis.
    Add page 188 to Favourites
    image text
    Enable zoom 
    							 Take Apart Right Side Access Panel  -   166
4. Using a flatblade 
screwdriver or 
needlenose pliers, push 
or squeeze the plastic 
tabs (protruding 
through the side chassis 
panel), to release the 
right panel from the 
metal chassis.
5. Remove the right side 
panel from the chassis.
    Add page 189 to Favourites
    image text
    Enable zoom 
    							 Take ApartLeft Side Panel  -   167
Left Side Panel
No preliminary steps are 
required before you begin 
this procedure.
    Add page 190 to Favourites
    image text
    Enable zoom 
    							 Take ApartLeft Side Panel  -   168
1. Remove the four 2.5 mm 
Allen screws on the side 
panel.
    All Apple manuals Comments (0)

    Related Manuals for Apple power mac g4 agp graphics User Manual