Asus Router RX3041 User Manual

RX3041 Router User's Manual
10

c )   S e l e c t   “ G a t e w a y ”   t a b   a n d   e n t e r   a   c o r r e c t   g a t e w a y 
address in “New gateway” field, and then click “Add”: 

RX3041 Router User's Manual11

d) Select “DNS Configuration”  tab and then select “Enable 
DNS” ,  enter  the  DNS  address  provided  by  your  ISP  in  the 
“DNS Server Search Order”  field, then click “Add”: 

RX3041 Router User's Manual
12

2.1.2 Checking TCI/IP Setting for Windows NT4.0
a)  Select “Control  Panel → Network”
,  click “Protocols” 
tab,  then  select  “TCP/IP  protocol” ,  the  window  below  will 
appear: 

RX3041 Router User's Manual
13

•    Select  the  network  card  on  your  system  from “Adapter” 
field.
•    If  you  decide  to  use  IP  address  from  the  router,  select 
“Obtain an IP address from a DHCP server”
.
• If  you  decide  to  use  the  desired  IP  address,  select 
“Specify
  an IP address” , and enter correct addresses in  “IP 
Address” and “Subnet Mask” fields.
b) Click “Properties”, the window below will appear: 

RX3041 Router User's Manual
14

c) Enter DNS address  got  from your ISP, select “DNS” tab, 
click  “Add”   under  “DNS  Service  Search  Order”   list,  and 
then enter DNS.
•  You'd  better  set  the  router ’s  IP  address  as  “Default 
Gateway”. 

RX3041 Router User's Manual
15

2.1.3 Checking TCP/IP Settings for Windows 2000
a)  Select  “Start → Control  Panel→   Network  and  Dial-up 
Connection”
 and right click “Local Area Connection” and 
then click “Properties”: 

RX3041 Router User's Manual
16

b)  Select  the “Internet  Protocol  (TCP/IP)”  for  the  network 
card  on  your  system,  then  click  “Properties”,  the  window 
below will appear.
•  If  you  decide  to  use  IP  address  from  the  router,  select 
“Obtain an IP address automatically”.
•  If  you  decide  to  use  the  desired  IP  address,  select  “Use 
the following IP address”, and enter the correct addresses 
in “IP Address” and “Subnet Mask” fields. 

RX3041 Router User's Manual
17

•  You'd  better  set  the  router ’s  IP  address  as “Default 
Gateway”.
•  If  the  DNS  Server  fields  are  empty,  select “Use  the 
following  DNS  server  addresses”   and  enter  the  DNS 
address provided by your ISP, then click “OK”.
2.1.4  Checking TCP/IP Settings for Windows XP
a )   C l i c k   “ S t a r t ”,   s e l e c t   “ C o n t r o l   P a n e l → N e t w o r k 
Connection” and right click  “Local Area Connection” then
select  “Properties” ,...

RX3041 Router User's Manual
18

b )   S e l e c t  “ I n t e r n e t   P r o t o c o l   ( T C P / I P ) ”   t h e n   c l i c k 
“Properties”, the following window will appear.
•  If  you  decide  to  use  IP  address  from  the  router,  select 
“Obtain an IP address automatically”
.
•  If  you  decide  to  use  the  desired  IP  address,  select  “Use 
the following IP address”, and enter the correct addresses 
in “IP Address” and “Subnet Mask” fields.
•  You'd  better  set  the  router ’s  IP...

RX3041 Router User's Manual
19

•  If  the  DNS  Server  fields  are  empty,  select “Use  the 
following  DNS  server  addresses”  and  enter  the  DNS 
address  provided by your ISP, then click 
“OK”.