ATT DEFINITY Communications System CallVisor ASAI Instructions Manual

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Facility Test Circuit Pack Ð Required for duplicated systems only;
optional for unduplicated
Expansion Interface Circuit Pack  Ð For new multiple-port network
systems or upgrades.  (If you have the older TN776 circuit pack, it must
be replaced with a TN570 circuit pack or later, which permits CallVisor
ASAI to terminate on an Expansion Port Network [EPN]).
MultiQuest trunk for Flexible Billing
Software...

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
To administer an ASAI link, use the add station command and set the link type
to 
ASAI. Fill out the remainder of the form as appropriate for your ASAI host.
CallVisor ASAI links do not support Management Information Messages (MIMs).
Screen 2-1 shows a sample completed Add Station form.
add station  Page 1 of 1
-----------------------------------------------------------------------------
STATION 
Extension: 5000...

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Table 2-1 shows how feature options are specified for different ASAI vendor
partners equipment. 
MIM Support? must always be set to no.
Table 2-1.  ASAI Feature Options Administration for AT&T Vendor Partners
bbbbbbbbbbbbbbbbbbbbbbbb
MIM Fixed CRV Event
Vendor Partner XID Support TEI Length Min.
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
does not respond to switch messages. The customer can tune the level of
on-board and off-board alarms to warnings, or minor or major alarms.
Alarm severities are set by means of the set options maintenance
command, explained in 
DEFINITY Communications System Generic 3r
Maintenance
, 555-230-105.  Once the ASAI adjunct alarms are
administered to an alarm level, the switch alarms all CallVisor ASAI links
at that...

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
ASAI-Accessed Internally Measured Data  Ð System-Parameters
Customer Options Form.  In addition, the following system features must
be activated to support the ASAI-Accessed Internally Measured Data
feature:
Ð Internally Measured Data option
Ð VuStats
For detailed instructions regarding the administration of the above features, see
the appropriate (G3i or G3r) 
DEFINITY Communications System Generic 3...

Installation and Test for CallVisor ASAIbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Digital Equipment Corp. (DEC)
International Business Corp. (IBM)
Hewlett-Packard (HP)
Aristacom
Stratus
Tandem
Novell (PassageWayÔTelephony Services)
NOTE:
This product is known as NetWareÒTelephony Services if sold by
Novell instead of AT&T.
Electronic Information Systems (EIS)
See Appendix E for CallVisor ASAI functionality supported by AT&T vendor
partners.
Issue 4  September 1995  
2-7 

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
   

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Installation and Maintenance
Service Offerings
3
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
AT&T provides the following installation and maintenance service offerings:
Installation and Implementation
Ð Basic Installation
Ð CallVisor ASAI Consultation Service
Ð CallVisor Implementation Single Point of Contact (SPOC)
Ongoing Support Services
Ð Basic Ongoing Support (CallVisor ASAI)
Ð CallVisor ASAI Single Point of Contact (SPOC) Support
Installation and...

Installation and Maintenance Service Offeringsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Identifying preliminary call scenarios and reviewing them with the
application provider
Finalizing and documenting call scenarios
Integrating call flows with switch configuration
Developing specifications of switch Busy Hour Call Completions (BHCCs)
and CallVisor ASAI link capacity
Reviewing final call scenarios with the application provider
Developing and administering switch translations. (The TAC will work...

Installation and Maintenance Service Offeringsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Ongoing Support Servicesbbbbbbbb
Basic Ongoing Supportbbbbbbbbbbbbbbb
AT&T will provide helpline support free of charge for CallVisor ASAI during the
one year of Post-Sale Software Support.  Also, for one year after your
acceptance, AT&T will replace the CallVisor ASAI software free of charge should
the distribution media (tape) be faulty or otherwise corrupted.  At the end of the
one-year Post-Sale Software...