Beko Ev 5800y Manual

							 
2820523382_EN / 31-08-15.(10:32)Document Number=
Washing Machine
User’s Manual
EV 5800 +Y
ENHR SL                
						

							This product was manufactured using the latest technology in environmentally friendly conditions. 
						

							3 /   EN
1  Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of perso-
nal injury or property damage. Failure to follow these instructions shall void any 
warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons 
whose physical, sensory or mental capabilities were not fully developed or who 
lack experience and knowledge provided that they are supervised or trained on 
the safe usage of the product and the risks it brings out. Children must not play 
with the product. Cleaning and maintenance works should not be performed by 
children unless they are supervised by someone. Children of less than 3 years 
should be kept away unless continuously supervised.
•  Never place the product on a carpet-covered floor. Otherwise, lack of airflow 
beneath the machine will cause electrical parts to overheat. This will cause pro-
blems with your product.
•  If the product has a failure, it should not be operated unless it is repaired by the 
Authorized Service Agent. There is the risk of electric shock!
•  This product is designed to resume operating in the event of powering on after 
a power interruption. If you wish to cancel the programme, see "Cancelling the 
programme" section.
•  Connect the product to a grounded outlet protected by a 16 A fuse. Do not ne-
glect to have the grounding installation made by a qualified electrician. Our com-
pany shall not be liable for any damages that will arise when the product is used 
without grounding in accordance with the local regulations.
•  The water supply and draining hoses must be securely fastened and remain un-
damaged. Otherwise, there is the risk of water leakage.
•  Never open the loading door or remove the filter while there is still wa\
ter in the 
drum. Otherwise, risk of flooding and injury from hot water will occur.
•  Do not force open the locked loading door. The loading door will be ready to open 
just a few minutes after the washing cycle comes to an end. In case of forcing 
the loading door to open, the door and the lock mechanism may get damaged.
•  Unplug the product when not in use.
•  Never wash the product by spreading or pouring water onto it! There is the risk of 
electric shock!
•  Never touch the plug with wet hands! Never unplug by pulling on the cable, 
always pull out by grabbing the plug.
•  Use detergents, softeners and supplements suitable for automatic washing ma-
chines only.
•  Follow the instructions on the textile tags and on the detergent package.
•  The product must be unplugged during installation, maintenance, cleaning and 
repairing procedures.
•  Always have the installation and repairing procedures carried out by the 
Authorized Service Agent. Manufacturer shall not be held liable for damages that 
may arise from procedures carried out by unauthorized persons. 
Washing Machine / User’s Manual   
						

							4 /   EN
•  If the power cable is damaged, it must be replaced by the manufacturer, after 
sales service or a similarly qualified person (preferably an electrician) or someone 
designated by the importer in order to avoid possible risks.
•  Place the product on a rigid, flat and level surface.
•  Do not place it on a long-pile rug or similar surfaces.
•  Do not place the product on a high platform or near the edge on a cascaded sur -
face.
•  Do not place the product on the power cable.
•  Never use sponge or scrub materials. These will damage the painted, chrome 
plated and plastic surfaces.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for commer -
cial use and it must not be used out of its intended use.
•  The product must only be used for washing and rinsing of laundry that are mar -
ked accordingly.
•  The manufacturer waives any responsibility arisen from incorrect usage or trans-
portation.
1.3 Children's safety
• Packaging materials are dangerous to children. Keep packaging materials in a 
safe place away from reach of the children.
•  Electrical products are dangerous for the children. Keep children away from the 
product when it is in use. Do not let them to tamper with the product. Use child 
lock to prevent children from intervening with the product. 
•  Do not forget to close the loading door when leaving the room where the product 
is located.
•  Store all detergents and additives in a safe place away from the reach of the 
children by closing the cover of the detergent container or sealing the detergent \
package.
While washing the laundry at high temperatures, the loading 
door glass becomes hot. Therefore, keep especially the children 
away from the loading door of the machine while the washing 
operation is in progress.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable materials 
in accordance with our National Environment Regulations. Do not dispose of the 
packaging materials together with the domestic or other wastes. Take them to the 
packaging material collection points designated by the local authorities. 
Washing Machine / User’s Manual   
						

							5 /   EN
1.5 Disposing of the waste product
•  This product has been manufactured with high quality parts and materials which 
can be reused and are suitable for recycling. Therefore, do not dispose the pro-
duct with normal domestic waste at the end of its service life. Take it to a collec-
tion point for the recycling of electrical and electronic equipment. Please consult 
your local authorities to learn the nearest collection point. Help protect the envi-
ronment and natural resources by recycling used products. For children's safety, 
cut the power cable and break the locking mechanism of the loading door so that 
it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU).  This pro-
duct bears a classification symbol for waste electrical and electronic 
equipment (WEEE).
This product has been manufactured with high quality parts and mate-
rials which can be reused and are suitable for recycling. Do not dispose 
of the waste product with normal domestic and other wastes at the 
end of its service life. Take it to the collection center for the recycling of 
electrical and electronic equipment. Please consult your local authori-
ties to learn about these collection centers. 
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU).  
It does not contain harmful and prohibited materials specified in the Directive. 
Washing Machine / User’s Manual   
						

							6 /   EN
2 InstallationRefer to the nearest Authorised Service Agent for installation 
of the product. To make the product ready for use, review 
the information in the user manual and make sure that the 
electricity, tap water supply and water drainage systems are 
appropriate before calling the Authorized Service Agent. If they 
are not, call a qualified technician and plumber to have any 
necessary arrangements carried out.
CINFORMATIONS
Preparation of the location and electrical, tap water and waste 
water installations at the place of installation is under customer’s 
responsibility. 
Make sure that the water inlet and discharge hoses as well as the 
power cable are not folded, pinched or crushed while pushing the 
product into its place after installation or cleaning procedures.
BWARNING
Installation and electrical connections of the product must be 
carried out by the Authorized Service Agent. Manufacturer shall not 
be held liable for damages that may arise from procedures carried 
out by unauthorized persons.
AWARNING
Prior to installation, visually check if the product has any defects on 
it. If so, do not have it installed. Damaged products cause risks for 
your safety.
2.1 Appropriate installation location•  Place the machine on a rigid floor. Do not place it on a long 
pile rug or similar surfaces.
•  Total weight of the washing machine and the dryer -with 
full load- when they are placed on top of each other 
reaches to approx. 180 kilograms. Place the product on a 
solid and flat floor that has sufficient load carrying capacity!
•  Do not place the product on the power cable.
•  Do not install the product at places where temperature may 
fall below 0ºC.
•  Place the product at least 1 cm away from the edges of 
other furniture.
2.2 Removing packaging reinforcementTilt the machine backwards to remove the packaging 
reinforcement. Remove the packaging reinforcement by 
pulling the ribbon.
2.3 Removing the transportation locks
AWARNING
Do not remove the transportation locks before taking out the 
packaging reinforcement.
Remove the transportation safety bolts before operating the 
washing machine! Otherwise, the product will be damaged.
Loosen all the bolts with a suitable spanner until they rotate 
freely (C). Remove transportation safety bolts by turning them 
gently. Attach the plastic covers supplied in the User Manual 
bag into the holes on the rear panel. (P)
CINFORMATIONS
Keep the transportation safety bolts in a safe place to reuse when 
the washing machine needs to be moved again in the future.
Never move the product without the transportation safety bolts 
properly fixed in place! 
Washing Machine / User’s Manual   
						

							7 /   EN
2.4 Connecting water supply
CINFORMATIONS
The water supply pressure required to run the product is between 
1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters 
of water flowing from the fully open tap in one minute to have your 
machine run smoothly. Attach a pressure reducing valve if water 
pressure is higher.
If you are going to use the double water-inlet product as a single 
(cold) water-inlet unit, you must install the supplied stopper to 
the hot water valve before operating the product. (Applies for the 
products supplied with a blind stopper group.)
If you want to use both water inlets of the product, connect the 
hot water hose after removing the stopper and gasket group from 
the hot water valve. (Applies for the products supplied with a blind 
stopper group.)
AWARNING
Models with a single water inlet should not be connected to the 
hot water tap. In such a case the laundry will get damaged or the 
product will switch to protection mode and will not operate.
Do not use old or used water inlet hoses on the new product. It may 
cause stains on your laundry.
Connect the special hoses supplied with the product to the 
water inlets on the product. Red hose (left) (max. 90 ºC) is for 
hot water inlet, blue hose (right) (max. 25 ºC) is for cold water 
inlet.
AWARNING
Ensure that the cold and hot water connections are made correctly 
when installing the product. Otherwise, your laundry will come out 
hot at the end of the washing process and wear out.
Tighten all hose nuts by hand. Never use a wrench when 
tightening the nuts. Open the taps completely after making the 
hose connection to check for water leaks at the connection 
points. If any leaks occur, turn off the tap and remove the nut. 
Retighten the nut carefully after checking the seal. To prevent 
water leakages and damages caused by them, keep the taps 
closed when the machine is not in use.
2.5 Connecting to the drain•  The end of the drain hose must be directly connected to 
the wastewater drain or to the washbasin. 
AWARNING
Do not remove the transportation locks before taking out the 
packaging reinforcement.
• The hose should be attached to a height of at least 40 cm, 
and 100 cm at most.
•  In case the hose is elevated after laying it on the floor level 
or close to the ground (less than 40 cm above the ground), 
water discharge becomes more difficult and the laundry 
may come out excessively wet. Therefore, follow the 
heights described in the figure.
100cm
40cm
•  To prevent flowing of dirty water back into the machine and 
to allow for easy discharge, do not immerse the hose end 
into the dirty water or do not drive it in the drain more than 
15 cm. If it is too long, cut it short.
•  The end of the hose should not be bent, it should not be 
stepped on and the hose must not be pinched between the 
drain and the machine.
•  If the length of the hose is too short, use it by adding 
an original extension hose. Length of the hose may not 
be longer than 3.2 m. To avoid water leak failures, the 
connection between the extension hose and the drain 
hose of the product must be fitted well with an appropriate 
clamp as not to come off and leak.
2.6 Adjusting the feet
AWARNING
In order to ensure that the product operates more silently and 
vibration-free, it must stand level and balanced on its feet. Balance 
the machine by adjusting the feet. Otherwise, the product may 
move from its place and cause crushing and vibration problems.
Loosen the lock nuts on the feet by hand. Adjust the feet until 
the product stands level and balanced. Tighten all lock nuts 
again by hand.
AWARNING
Do not use any tools to loosen the lock nuts. Otherwise, they will 
get damaged.
2.7 Electrical connectionConnect the product to a grounded outlet protected by a fuse 
complying with the values in the "Technical specifications" 
table. Our company shall not be liable for any damages that 
will arise when the product is used without grounding in 
accordance with the local regulations. 
Washing Machine / User’s Manual   
						

							8 /   EN
3 Preparation
3.1 Things to be done for energy savingFollowing information will help you use the product in an 
ecological and energy-efficient manner.
•  Operate the product in the highest capacity allowed by the 
programme you have selected, but do not overload; see, 
"Programme and consumption table".
•  Always follow the instructions on the detergent packaging.
•  Wash slightly soiled laundry at low temperatures.
•  Use faster programmes for small quantities of lightly soiled 
laundry.
•  Do not use high temperatures for laundry that is not heavily 
soiled or stained.
•  Do not use detergent in excess of the amount 
recommended on the detergent package.
3.2 Sorting the laundry• Sort laundry according to type of fabric, colour, and degree 
of soiling and allowable water temperature.
•  Always obey the instructions given on the garment tags.
3.3 Preparing laundry for washing• Laundry items with metal attachments such as, underwired 
bras, belt buckles or metal buttons will damage the 
machine. Remove the metal pieces or wash the clothes by 
putting them in a laundry bag or pillow case.
•  Take out all substances in the pockets such as coins, pens 
and paper clips, and turn pockets inside out and brush. 
Such objects may damage the product or cause noise 
problem.
•  Put small size clothes such as infant's socks and nylon 
stockings in a laundry bag or pillow case.
•  Place curtains in without compressing them. Remove 
curtain attachment items.
•  Fasten zippers, sew loose buttons and mend rips and 
tears.
•  Wash “machine washable” or “hand washable” labeled 
products only with an appropriate programme.
•  Do not wash colours and whites together. New, dark 
coloured cottons release a lot of dye. Wash them 
separately.
•  Tough stains must be treated properly before washing. If 
unsure, check with a dry cleaner.
•  Use only dyes/colour changers and limescale removers 
suitable for machine wash. Always follow the instructions 
on the package.
•  Wash trousers and delicate laundry turned inside out.
•  Keep laundry items made of Angora wool in the freezer for 
a few hours before washing. This will reduce pilling.
•  Laundry that are subjected to materials such as flour, lime 
dust, milk powder, etc. intensely must be shaken off before 
placing into the machine. Such dusts and powders on the 
laundry may build up on the inner parts of the machine in 
time and can cause damage.
3.4 Correct load capacityThe maximum load capacity depends on the type of laundry, 
the degree of soiling and the washing programme desired.
The machine automatically adjusts the amount of water 
according to the weight of the loaded laundry.
• 
Connection must comply with national regulations.
•  Power cable plug must be within easy reach after 
installation.
•  The voltage and allowed fuse or breaker protection are 
specified in the “Technical specifications” section. If the 
current value of the fuse or breaker in the house is less 
than 16 Amps, have a qualified electrician install a 16 Amp 
fuse.
•  The specified voltage must be equal to your mains voltage.
•  Do not make connections via extension cables or multi-
plugs.
BWARNING
Damaged power cables must be replaced by the Authorized Service 
Agents.
2.8 First useBefore starting to use the product, make sure that all 
preparations are made in accordance with the instructions in 
sections "Important safety instructions" and "Installation".
To prepare the product for washing laundry, perform first 
operation in Cotton-90 programme. Before starting the 
programme, put max. 100 g of powder anti-limescale into 
the main wash detergent compartment  (compartment nr. II). 
If the anti-limescale is in tablet form, put only one tablet into 
compartment nr. II. Dry the inside of the bellow with a clean 
piece of cloth after the programme has come to an end. 
CINFORMATIONS
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality 
control processes in the production. It is not harmful for the product.
2.9 Disposing of packaging materialPackaging materials are dangerous to children. Keep 
packaging materials in a safe place away from reach of the 
children.
Packaging materials of the product are manufactured from 
recyclable materials. Dispose of them properly and sort in 
accordance with recycled waste instructions. Do not dispose 
of them with normal domestic waste.
2.10 Transportation of the productUnplug the product before transporting it. Remove water drain 
and water supply connections. Drain the remaining water in 
the product completely; see, "Draining remaining water and 
cleaning the pump filter". Install transportation safety bolts in 
the reverse order of removal procedure; see, "Removing the 
transportation locks".
CINFORMATIONS
Never move the product without the transportation safety bolts 
properly fixed in place!
2.11 Disposing of the old productDispose of the old product in an environmentally friendly 
manner.
Refer to your local dealer or solid waste collection centre in 
your area to learn how to dispose of your product.
For children's safety, cut the power cable and break the 
locking mechanism of the loading door so that it will be 
nonfunctional before disposing of the product. 
Washing Machine / User’s Manual   
						

							9 /   EN
AWARNING
Follow the information in the “Programme and consumption table”. 
When overloaded, machine’s washing performance will drop. 
Moreover, noise and vibration problems may occur.
Laundry types and their average weights in the following table 
are given as examples.
Laundry type Weight (g)
Bathrobe 1200
Duvet cover 700
Bed Sheet 500
Pillowcase 200
Tablecloth 250
Towel 200
Men’s shirt 200
3.5 Loading the laundryOpen the loading door. Place laundry items loosely into the 
machine. Push the loading door to close until you hear a 
locking sound. Ensure that no items are caught in the door.
CINFORMATIONS
The loading door is locked while a programme is running. The door 
can only be opened a while after the programme comes to an end.
AWARNING
In case of misplacing the laundry, noise and vibration problems may 
occur in the machine.
3.6 Using detergent and softener
Detergent DrawerThe detergent drawer is composed of three compartments:
- (1) for prewash
- (2) for main wash
– (3) for softener
– (*) in addition, there is siphon piece in the softener 
compartment.
1
2 3
Detergent, softener and other cleaning agents• 
Add detergent and softener before starting the washing 
programme.
•  Never open the detergent drawer while the washing 
programme is running!
•  When using a programme without prewash, do not put any 
detergent into the prewash compartment (compartment nr. 
1).
•  In a programme with prewash, do not put liquid detergent 
into the prewash compartment (compartment nr. 1).
•  Do not select a programme with prewash if you are using a 
detergent bag or dispensing ball. Place the detergent bag 
or the dispensing ball directly among the laundry in the 
machine.
•  If you are using liquid detergent, do not forget to place 
the liquid detergent cup into the main wash compartment 
(compartment nr. 2).
3.7 Choosing the detergent typeThe type of detergent to be used depends on the type and 
colour of the fabric.
• Use different detergents for coloured and white laundry.
•  Wash your delicate clothes only with special detergents 
(liquid detergent, wool shampoo, etc.) used solely for 
delicate clothes.
•  When washing dark coloured clothes and quilts, it is 
recommended to use liquid detergent.
•  Wash woolens with special detergent made specifically for 
woolens.
AWARNING
Use only detergents manufactured specifically for automatic 
washing machines.
Do not use soap powder.
3.8 Adjusting detergent amountThe amount of washing detergent to be used depends on the 
amount of laundry, the degree of soiling and water hardness. 
Read the manufacturer's instructions on the detergent 
package carefully and follow the dosage values.
• Do not use amounts exceeding the dosage quantities 
recommended on the detergent package to avoid problems 
of excessive foam, poor rinsing, financial savings and 
finally, environmental protection.
•  Use lesser detergent for small amounts or lightly soiled 
clothes.
•  Use concentrated detergents in the recommended dosage.
3.9 Using softenersPour the softener into the softener compartment of the 
detergent drawer.
• Use the dosages recommended on the package.
•  Do not exceed the (>max
						

							10 /   EN
not use it for coloured clothes.
•  When using oxygen based bleaches, follow the instructions 
on the package and select a programme that washes at a 
lower temperature.
•  Oxygen based bleaches can be used together with 
detergents; however, if its thickness is not the same with 
the detergent, put the detergent first into the compartment 
nr. "II" in the detergent drawer and wait until the detergent 
3.10 Tips for efficient washing
Clothes
Light colours and whites ColoursDark coloursDelicates/Woolens/
Silks
(Recommended 
temperature range based 
on soiling level: 40-90ºC) (Recommended 
temperature range based 
on soiling level: cold-
40ºC)(Recommended 
temperature range 
based on soiling 
level: cold-40ºC)(Recommended 
temperature range 
based on soiling 
level: cold-30ºC)
Soiling Level
Heavily Soiled
(difficult stains 
such as grass, 
coffee, fruits and 
blood.)It may be necessary to 
pre-treat the stains or 
perform prewash. Powder 
and liquid detergents 
recommended for whites 
can be used at dosages 
recommended for 
heavily soiled clothes. It 
is recommended to use 
powder detergents to 
clean clay and soil stains 
and the stains that are 
sensitive to bleaches.  Powder and 
liquid detergents 
recommended for 
colours can be used at 
dosages recommended 
for heavily soiled clothes. 
It is recommended to use 
powder detergents to 
clean clay and soil stains 
and the stains that are 
sensitive to bleaches. 
Use detergents without 
bleach.
Liquid detergents 
suitable for colours 
and dark colours can 
be used at dosages 
recommended 
for heavily soiled 
clothes.
Prefer liquid 
detergents produced 
for delicate clothes. 
Woolen and silk 
clothes must be 
washed with special 
woolen detergents.
Normally Soiled
(For example, 
stains caused by 
body on collars 
and cuffs) Powder and liquid 
detergents recommended 
for whites can be used at 
dosages recommended for 
normally soiled clothes. Powder and 
liquid detergents 
recommended for 
colours can be used at 
dosages recommended 
for normally soiled 
clothes. Use detergents 
without bleach.Liquid detergents 
suitable for colours 
and dark colours can 
be used at dosages 
recommended for 
normally soiled 
clothes. 
Prefer liquid 
detergents produced 
for delicate clothes. 
Woolen and silk 
clothes must be 
washed with special 
woolen detergents.
Lightly Soiled
(No visible stains 
exist.) Powder and liquid 
detergents recommended 
for whites can be used at 
dosages recommended for 
lightly soiled clothes. Powder and 
liquid detergents 
recommended for 
colours can be used at 
dosages recommended 
for lightly soiled clothes. 
Use detergents without 
bleach.Liquid detergents 
suitable for colours 
and dark colours can 
be used at dosages 
recommended for 
lightly soiled clothes.
Prefer liquid 
detergents produced 
for delicate clothes. 
Woolen and silk 
clothes must be 
washed with special 
woolen detergents.
flows while the machine is taking in water. Add the 
bleaching agent from the same compartment while the 
machine is still taking in water.
Using limescale remover
•  When required, use limescale removers manufactured 
specifically for washing machines only. 
•  Always follow instructions on the package. 
Washing Machine / User’s Manual