BEKO WKD 75100 User Manual

EN15
Display symbols
Figure 3
13.a - Spin Speed Indicator
13.b – Temperature Indicator
13.c – Spinning Symbol
13.d – Temperature Symbol
13.e – Remaining Time and Delaying 
Time Indicator
13.f	–	Program	Indicator	Symbols	
(prewashing/main washing/rinsing/
softener/spinning)
13.g – Economy Symbol
13.h – Time Delaying Symbol
13.i – Door Locked Symbol
13.j – Start Symbol
13.k – Standby Symbol
13.l – Auxiliary Function Symbols
Turning the machine on
Plug	in	your	machine.	Turn	the	tap	on	
completely. Check if...

EN16
is recommended at this program. It 
washes the laundry with very tender 
washing movements without wearing 
your clothes out.
•Woollens
You	can	wash	your	machine-washable	
woollen garments at this program. Wash 
by selecting the proper temperature 
according to the labels of your clothes. 
It is recommended to use appropriate 
detergents for woolens. 
•Delicates
You	can	wash	your	delicate	clothes	
at this program. It has more sensitive 
washing movements and does not 
make intermediate spinning...

EN17
the temperature anticipated for that 
program appears on the temperature 
indicator	(13b).
To change the temperature, press 
the	temperature	button	(Figure	2-9).	
Temperature falls with 10° decrements.
Cold	selection	is	shown	with	“-”	symbol.
When	the	“Temperature”	button	is	
pressed after coming to the Cold 
selection, the maximum temperature of 
the program you have selected will be 
displayed.
To decrease the temperature, press the 
“Temperature”	button	again.
90˚C	Normally soiled, white 
cottons...

EN18
Program selection and consumption table
•	Selectable
* Automatically selected, not cancellable.
**	Energy	Label	programme	(EN	60456)
***	Spin	speed	of	Mini	30	program	in	washing	machines	with	spin	speeds	more	than	
1400rpm is maximum 1400 rpm.
Water and power consumption and programme duration may differ from the t\
able 
shown, subject to changes in water pressure, water hardness and temperat\
ure, 
ambient temperature, type and amount of laundry, selection of auxiliary \
functions, 
and...

EN19
C The auxiliary functions in the table 
may differ according to the model of 
your machine.
Auxiliary functions
Auxiliary function selection keys
•	 Depending	on	the	program,	you	can	
select the desired auxiliary function 
by pressing the keys 11a, 11b, 11c, 
11d.
•	 Select	the	required	auxiliary	 functions before starting the 
program.
•	 Some	combinations	cannot	be	 selected	together.	(Ex.:	Prewash	
(Figure	2-11a)	and	Quick	Wash	
(Figure	2-11b).
•	 Symbol	of	the	selected	auxiliary	 function...

EN20
temperature, ambient temperature, 
type and amount of laundry, auxiliary 
functions selected, and changes in 
the supply voltage.
Time delay
With	the	“Time	delay”	function	you	can	
delay the program start up to 24 hours. 
Setting can be made in intervals of 30 
minutes.
1.	 Open	the	loading	door,	place	the	 laundry inside and fill with detergent.
2.  Set the washing program, 
temperature, spin speed and, 
if required, select the auxiliary 
functions.
3.	 Press	“Time	delaying”	buttons	“+”	 and	“-”...

EN21
the series of symbols indicates the 
step that is being carried out.
Prewash
When	“Prewash”	auxiliary	function	is	
selected, prewash symbol will light up to 
indicate the beginning of prewash step.
Main wash
Main	wash	symbol	will	light	up	to	
indicate that the main wash cycle has 
started.
Rinse
Rinse symbol lights up at the beginning 
of the rinse step.
Softener  
Softener symbol lights up at the 
beginning of softener step. 
Spin
Spin symbol will light up at the beginning 
of	the	final	spin,...

EN22
The same symbol will also be displayed 
on the screen whenever any button 
is pressed while the machine is child-
locked.
To deactivate the child-proof lock, 
press the 2nd and 4th auxiliary function 
buttons for 3 sec.
“C:OFF”	(Child	lock	is	deactivated)	label	
appears on the screen.
Ending the program through 
canceling
“Start/Pause/Cancel”	button	(Figure	
2-10)	is	pressed	for	3	seconds	to	cancel	
the program. Start symbol (Figure 
3-13j)	will	flash	during	cancellation.	
After cancellation, the...

EN23
Preparation
1. Turn the tap on completely. Check if 
the hoses are connected tightly.
2.	 Place	the	laundry	in	the	machine.
3.  Add detergent and softener.
Starting
1.	 Press	the	“On/Off”	button	(Figure	 2-14).
2.  Select the program and the 
temperature.
3.  If desired (according to your 
machine’s	model):
–  select any auxiliary function,
–  adjust the spin speed,
–  set the time delay,
4.  Close the loading door.
5.	 Press	“Start/Pause/Cancel”	button	 (Figure	2-10).
The display shows the time...

EN24
machine for a balanced load.
2.   Select the spin program.
3.   Adjust the spin speed.
After the program is finished
Program	indicator	symbols	(Figure	
3-13f)	on	the	screen	will	remain	lit	
after	the	program	is	finished.	“End”	will	
appear on the screen.
1.	 Open	the	loading	door	and	take	out	 the laundry when the door locked 
symbol	on	the	display	(Figure	3-13i)	
fades out.
2.	 Press	the	“On/Off”	button	(Figure	 2-14).
3.  Turn the water tap off.
4.  Remove any folds in the rubber seal 
on the...