BenQ G1 User Manual

							More on the playback mode  61
English
Playing back a panorama image
To playback the panorama image, do the following:
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select 
the panorama image you want to play.
To enlarge the image:
Slide the 
Zoom lever to   to zoom-in on 
a captured image. In Zoom mode, use the 
Zoom lever to adjust the zoom ratio and 
press   or   to move to the area you want 
to view.
3. Press   to start the image playback.
• Press   to stop the playback.
• Press   to pause it. Press   again to 
resume.
To play back a voice memo:
1. In Playback mode, select the voice memo that you want to play.
2. Press   to play the voice memo.
To adjust the volume:
• To increase the volume, slide the 
Zoom lever to  .
• To decrease the volume, slide the 
Zoom lever to  .
3. Press   again to stop the playback.
Deleting files
Deletes one, selected, or all files (photos or videos) or delete voice memo 
attached on the files. See Deleting files on page 32 for details.
During the playback, press and hold  to fast forward or press and hold  to 
rewind.
2012.01.012012.01.0112:0012:00
G1 UM - Without Safety Reg - EN.book  Page 61  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							62  More on the playback mode
English
Slideshow playback
Sets the time interval for presenting a series of captured image and video files 
(first frame only).
1. Press   to switch to 
Playback mode.
2. Press   >   > 
Slide Show.
3. Press   or   to enter the submenu.
4. Change the slideshow settings.
• Use the wheel dial or press   or   to 
select 
Interval, and press   or  to set 
the transition interval between 1/3/5 
seconds.
• Use the wheel dial or press   or   to 
select 
Repeat, and press   or  to 
select whether you want to repeat the 
slideshow.
5. Use the wheel dial or press   or   to select 
Start and press   to play 
the slideshow.
6. Press   again to stop the slideshow. 
Protecting files
Prevents selected files from accidental removal.
To protect a single file:
1. Press   to switch to Playback mode.
2. Use the wheel dial or press   or   to select the file that you want to 
protect.
3. Press   >   > 
Protect.
4. Press   or   to enter the submenu.
5. Use the wheel dial or press   or   to select 
Single and press  .
6. A confirmation message appears on the screen. Press   or   to select 
Set and press   to confirm file protection.
• A   icon appears on the protected file.
• Repeat Step 2~6 to protect other files.
Playback Menu
SET BACKStart
Interval
Repeat3 sec.
Ye s
G1 UM - Without Safety Reg - EN.book  Page 62  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							More on the playback mode  63
English
To protect multiple files:
1. Press   to switch to Playback mode.
2. Press  >  > 
Protect.
3. Press   or   to enter the submenu.
4. Use the wheel dial or press   or   to 
Select and press  .
The images are displayed in thumbnail view.
5. Use the wheel dial or press  ,  ,  , or 
 to locate the file you want to protect.
6. Press   to mark the file. A
  icon 
appears on the marked files.
7. When the file selection is complete, press  .
To  p r o t e c t  a l l  f i l e s :
1. Press   to switch to Playback mode.
2. Press  >  > 
Protect.
3. Press   or   to enter the submenu.
4. Press   or   to select 
Lock All and 
press .
5. A confirmation message appears on the 
screen. Use the wheel dial or press   or 
 to select 
Set and press   to confirm file 
protection.
• If the   icon does not appear on the thumbnail images, this indicates the files 
are not protected.
• Slide the Zoom lever to   to view the image in full screen. Slide the Zoom 
lever to   to return to thumbnail view.
You can remove the protection anytime by following the same procedure as shown 
above. Note that in Step 4 select Unlock All to unlock all files.
SET BACK
Protect All ?
Set
Cancel
G1 UM - Without Safety Reg - EN.book  Page 63  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							64  More on the playback mode
English
Attaching voice memo
Inserts a voice annotation to an image file.
To record a voice memo:
1. Press   to switch to Playback mode.
2. Use the wheel dial or press   or   to select the image you want to add a 
voice memo.
3. Press   >   > 
Voice Memo.
4. Press   or   to enter the submenu.
5. Press   or   to select 
Start and press 
 to start voice recording.
During audio recording, press   to stop 
recording.
• The maximum audio recording time is 30 seconds.
• A   icon appears on the file that is attached with voice memo.
Voice memo 30 Sec.
Start
Cancel
G1 UM - Without Safety Reg - EN.book  Page 64  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							More on the playback mode  65
English
Setting startup image
You can customize the startup image. This image is displayed on the screen 
every time you turn on the camera.
1. Press   to switch to 
Playback mode.
2. Press  >  > 
Startup Image.
3. Press   or   to enter the submenu.
4. Use the wheel dial or press   or   to 
select the setting:
•
Default: uses the default startup image.
•
My Photo: sets one of your captured image 
as the startup image. Press   or   to 
select the image that you want to use.
•
Off: disables this feature.
5. Press   to confirm.
Setting DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on 
the memory card for printing and specify the number of print copies in advance 
using the camera. This is extremely convenient for sending the images to a 
photo developing service or for printing on a direct print function compatible 
printer.
To set up DPOF on a single file:
1. Press   to switch to Playback mode.
2. Press  >  > 
DPOF.
3. Press   or   to enter the submenu.
4. Use the wheel dial or press   or   to 
select 
Single and press  .
5. Press   or   to select the files that you 
want to mark for printing.
6. Use the wheel dial or press   or   to specify the number of copies.
7. Press   to confirm the setting.
Slide the Zoom lever to   to select whether you want to print the date stamp.
Startup Image
Default
My Photo
Off
DPOF Single 2/153
00
Date Stamp OnOK OK
G1 UM - Without Safety Reg - EN.book  Page 65  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							66  More on the playback mode
English
To set up DPOF on all files:
1. Press   to switch to Playback mode.
2. Press   >   > 
DPOF.
3. Press   or   to enter the submenu.
4. Use the wheel dial or press   or   to 
select 
All and press  .
5. Use the wheel dial or press   or   to 
specify the number of copies.
6. Press   to confirm the setting.
To  r e s e t  D P O F :
1. Press   to switch to Playback mode.
2. Press   >   > 
DPOF.
3. Press   or   to enter the submenu.
4. Use the wheel dial or press   or   to select 
Reset and press   to clear 
all DPOF settings.
Trimming an image
Crops part of an image file and saves it as another new file.
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select the image you want to trim.
3. Press   >   > 
Tr im.
4. Press   or   to enter the submenu.
5. Use the 
Zoom lever to set the image size. 
• Slide the Zoom lever to   repeatedly to 
toggle the following image size (reduce the 
image size): 8M / 4M / 2M / VGA.
• Slide the Zoom lever to   repeatedly 
to toggle the following image size (increase 
the image size): VGA / 2M / 4M / 8M.
6. Press  ,  ,  , or   to locate the area 
you want to trim.
7. Press  to trim the enlarged view.
DPOF All
00
Date Stamp OnOK
OK
8M8M
SETSETSETOK
OK
G1 UM - Without Safety Reg - EN.book  Page 66  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							More on the playback mode  67
English
8. Use the wheel dial or press   or   to select Save as and press   to 
confirm and save the image file.
Resizing an image
Changes an image file to a smaller size and saves it as another new file.
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select the image you want to resize.
3. Press  >  > 
Resize.
4. Press   or   to enter the submenu.
5. Use the wheel dial or press   or   to 
select the target image size to which you want 
to reduce and press  .
6. A confirmation message appears on the 
screen. Use the wheel dial or press   or   
to select 
Save as to confirm the change and 
save the image file.
Adding photo effect
Edits an image file by adding a photo effect and saves it as another new file.
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select 
the image you want to add an effect to.
3. Press  >  > 
Photo Effect.
4. Press   or   to enter the submenu.
5. Use the wheel dial or press   or   to 
select the desired effect and press   to 
confirm the selection.
• The trimmed photos cannot be trimmed again.
• This function is not applicable to photos with 16:9 image size.
• The resize image is saved as a new file.
• Each photo can only be resized once.
Playback Menu
SET BACK
8M
4M
2M
VGA
Playback Menu
Photo Effect
Red-eye Correction
Rotate image
SET BACKPhoto EffPhoto EffRed-eye CyRotate im
D-lighting
Beauty Enhancer
Fisheye
Astral
Sketch
G1 UM - Without Safety Reg - EN.book  Page 67  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							68  More on the playback mode
English
If D-lighting or Beauty Enhancer is 
selected, use the wheel dial or press   or 
 to select the desired effect level and press 
.
6. A confirmation message appears on the screen. Use the wheel dial or press 
 or   to select 
Save as to confirm the change and save the image file.
Removing red-eye
Removes the red-eye effect on the captured photos.
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select the image you want to edit.
3. Press   >   > 
Red-eye Correction.
4. Press   or   to enter the submenu.
5. View the changes on the corrected image and 
press   to save the image.
6. A confirmation message appears on the 
screen. Use the wheel dial or press   or   
to select 
Save as to confirm the change and 
save the image file.
D-lighting
High
Middle
Low
Red-eye Correction
Save as
Cancel
G1 UM - Without Safety Reg - EN.book  Page 68  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							More on the playback mode  69
English
Rotating an image
Changes the orientation of an image at 90° at a time.
1. Press   to switch to 
Playback mode.
2. Use the wheel dial or press   or   to select the image you want to rotate.
3. Press  >  > 
Rotate image.
4. Press   or   to enter the submenu.
5. Use the wheel dial or press   or   to 
rotate the image 90°.
• To rotate the image 90° clockwise, press   
or rotate the wheel dial to the right.
• To rotate the image 90° counter-clockwise, 
press   or rotate the wheel dial to the left.
6. Press   to confirm the change and save the image file.
OK OK
Rotate image
SAVE
ROTATE
G1 UM - Without Safety Reg - EN.book  Page 69  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals 
						

							70  Video recording and playback
English
Video recording and playback
Recording videos
You can record video with this camera. Set the movie settings before you start 
recording a video. See Using the Movie Menu on page 72 for details.
1. Press   to start recording.
2. Use the 
Zoom lever to zoom in/out on the 
subject.
3. Press   to stop the recording.
Recording slow-motion videos
When the video size is set to 640 X 480p@120fps (1/4X, 3Mbps) or 
1280x720p@60fps (1/2X, 8Mbps), the video is recorded at high speed.
The maximum recording length for:
• 640 X 480p@120fps (1/4X, 3Mbps): 6 minutes 15 seconds.
• 1280x720p@60fps (1/2X, 8Mbps):12 minutes 30 seconds. 
1. Press   >   > 
Movie Mode.
2. Press   or   to enter the submenu.
3. Use the wheel dial or press   or   to select 640 X 480p@120fps (1/
4X, 3Mbps) or 1280x720p@60fps (1/2X, 8Mbps).
4. Press   to confirm setting. 
5. Press   to exit the menu mode.
6. Press   to start recording. 
• Video recording at FHD 1080p / HD 720p will automatically stop when the video 
file size reaches near 4 GB or the total recording time reaches near 25 minutes.
• Digital zoom is not available while recording a video.
Sound is not recorded during slow-motion video recording.
30m47s30m47s
G1 UM - Without Safety Reg - EN.book  Page 70  Wednesday, June 13, 2012  10:39 AM
Downloaded From camera-usermanual.com BenQ Manuals