BenQ V2410b User Manual
Have a look at the manual BenQ V2410b User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Adjusting the screen resolution Adjusting the screen resolution Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. For the best display performance, please set the display to its maximum resolution with an aspect ratio of 16:9. This is called “Native Resolution” or maximal resolution – that is, the clearest picture. Please refer to the table below for the native resolution of your LCD. Lower resolutions are displayed on a full screen through an interpolation circuit. Image blurring across pixel boundaries can occur with the interpolated resolution depending upon the image type and its initial resolution. To take full advantage of LCD technology you should select the native resolution setting of your PC screen as described below. Be aware that not all PC video cards provide this resolution value. If yours doesnt, check with the video card manufacturers website for an updated driver for your particular model PC video card which supports this resolution. Software video drivers are often updated and available for new hardware video resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to support the native resolution of the monitor. 1. Open Display Properties and select the Settings tab. Yo u c a n o p e n Display Properties by right-clicking on the Windows desktop and selecting Properties from the pop-up menu. 2. Use the slider in the ‘Screen area’ section to adjust the screen resolution. Select the recommended resolution (maximum resolution) then click Apply. If you select some other resolution, be aware that this other resolution is interpolated and may not accurately display the screen image as well as it could do at the native resolution setting. 3. Click OK then Ye s. 4. Close the Display Properties window. If your input source does not provide an image with a 16:9 aspect ratio, the displayed image may appear stretched or distorted. To maintain the original aspect ratio, image scaling options can be found in the “Display Mode” adjustment. See Display Mode on page 24 for more information. ModelNative Resolution V2410B 1920 x 1080 V2410T 1920 x 1080
32 Adjusting the screen refresh rate Adjusting the screen refresh rate You don’t have to choose the highest possible refresh rate on an LCD display, because it is not technically possible for an LCD display to flicker. The best results are obtained by using the factory modes already set in your computer. Check next chapter to see the factory modes: Preset display modes on page 33. You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please refer to the table on page 31. 1. Double click the Display icon in Control Panel. 2. From the Display Properties window, select the Settings tab and click the Advanced button. 3. Select the Adapter tab, and select an appropriate refresh rate to match one of the applicable factory modes as listed in the specification table. 4. Click Change, OK, then Ye s. 5. Close the Display Properties window.
33 Preset display modes Preset display modes •Image disruption may occur as a result of signal frequency differences from graphic cards which do not correspond with the usual standard. This is not, however, an error. You may improve this situation by altering an automatic setting or by manually changing the phase setting and the pixel frequency from the “DISPLAY” menu. •To extend the service life of the product, we recommend that you use your computers power management function. Incoming display mode (Input timing) Resolution24W 1920X1080 640x480@60Hz v 640x480@75Hz v 720x400@70Hz v 800x600@60Hz v 800x600@75Hz v 832x624@75Hz v 1024x768@60Hz v 1024x768@75Hz v 1152x870@75Hz v 1280x720@60Hz v 1280X960@60Hz v 1280x1024@75Hz v 1360x768@60Hz v 1600x900@60Hz v 1680x1050@60Hz v 1920x1080@60Hz v
34 Recycling information Recycling information Recognizing the importance of environmental protection and assigning itself the responsibility of protecting the global environment, BenQ has endeavored, and will steadily continue to endeavor, to construct recycling systems around the world so as to collect and recycle the used monitors from our customers. Therefore, we would sincerely appreciate your support in properly recycling or disposing of your monitor at the end of its life cycle. This recycling information guide provides you the information on our service centers. Please see the following list to contact the center in your area, and our service centers will assist you in managing your used monitors. To gain the up-to-date recycling information, please visit the following website: http://www.benq.com/page/?pageId=267. AreaCountryDetails on the Service Center Asia Pacific Taiwan BenQ Asia Pacific Corp. Customer Care Department Tel.: +886-0800-027-427 16 Jihu Road, Neihu, Taipei 114, Taiwan (R.O.C.) America United States BenQ America Corp. 15375 Barranca Parkway, Suite A-205 Irvine, CA 92618 Customer Service Toll-free number: 1-866-600-2367 (USA) www.benq.us/support/ Europe Austria UFH Umweltforum Haushalt Tel.: +43 1 588 39-0 www.ufh.at Belgium RECUPEL ICT Tel.: +32 2 706 86 16 E-mail: [email protected] www.recupel.be
35 Recycling information Czech RREMA lOOO IK, a.s. Bavorská 856 155 41 Praha 5 Česká republika Tel.: +420 224 454 224 Fax: +420 224 454 422 E-mail: [email protected] www.remasystem.cz Denmark Elretur A/S Tel.: +45 33 36 91 98 E-mail: [email protected] Norway Elretur AS Tel.: +47 23 06 07 40 E-mail: [email protected] Estonia EES - Ringlus Endla 3, 10122 Tallinn, Tel.: +372 6 484 335 Fax: +372 6 307 300 E-mail: [email protected] www.eesringlus.ee Finland Elker OY Tel.: +358 (0)10 249 17 00 E-mail: [email protected] www.elker.fi Germany EAR Tel.: +49 0911766650 E-mail: [email protected] Greece ANAKIKLOSI SISKEVON S.A. Tel: +30 210 5319762 - 5 Fax: +30 210 5319766 E-mail: [email protected] www.electrocycle.gr AreaCountryDetails on the Service Center
36 Recycling information Hungary ELECTRO-COORD Magyarország Kht. Márvány utca 18, H-1012 Budapest Tel.: (+36-1) 224-7730, Fax: (+36-1) 224-7739 E-mail: [email protected] www.electro-coord.hu Ireland Midia Ltd Tel.: +353-1-4199733 Fax: +353-1-4565120 Unit B Montone Business Park Oak Road Dublin 12 Luxembourg Ecotrel 7, rue Alcide de Gasperi L-1615 Luxembourg (Kirchberg) Tel.: +352 26098731 Fax: +352 26098736 www.ecotrel.lu Netherland ICT Milieu Tel.: +31-0348493640 E-mail: [email protected] Portugal Associaçao Portuguesa de Gestao de residuos de Equipamentos Electricos o Electronicos Av. Do Forte, nº3 Edificio Suecia I, piso 3 2794-038 Carnaxide, Portugal Tel.: +(351) 214169020 www.amb3e.pt ERP - Associaçao Gestora de Residuos de Equipamentos Electricos o Electronicos Beloura Office Park, Edifício 6, Sala 6 Quinta da Beloura 2710-693 SINTRA, Portugal Tel.: +(351) 210029211 E-mail: [email protected] www.erp-portugal.pt AreaCountryDetails on the Service Center
37 Recycling information Slovakia SEWA, a.s. Račianska č. 71 831 02 Bratislava Tel.: + 421 (0)2 4910 6811 Fax: + 421 (0)2 4910 6819 E-mail: [email protected] Spain ECOASIMELEC C/ Orense, 62, 28020 Madrid Tel.: + 34914170890 Fax: +34915550362 Sweden El-kretsen AB Tel.: +46 (0)8-545 212 90 E-mail: [email protected] France EcoLogic SAS Immeuble ARAGO I 41, Boulevard Vauban 78280 Guyancourt Tel.: 0 825 825 732 E-mail: [email protected] www.ecologic-france.com UK WeeeCare Plc Richmind House Garforth Leeds LS25 1NB Tel.: 01133 854 333 Fax: 01133 854 322 E-mail: [email protected] www.weeecare.com Italy ecoRit V.le Fulvio Testi, 128 20092 Cinisello Balsamo (MI) Tel.: +39 02 26255.396 Fax: +39 02 26255.397 E-mail: [email protected] www.ecorit.it AreaCountryDetails on the Service Center
38 Recycling information Bulgaria Most Computers Blv. 240 Shipchenski Prohod 1111 S o f i a B u l g a r i a Tel.: +359 2 91 823 www.mostcomputers.com www.most.bg Latvia SIA EMP Latvia, Riga, Kr.Barona 133, LV-1012 Mob.: (+371) 9468536 Tel.: (+371) 7291206 Fax: (+371) 7291206 www.emp.lt Lithuania Novitera Tel: +370-698-49553 Contatact person: Jonas Grinskis E-mail: [email protected] [email protected] Language: Lithuanian, English www.novitera.lt EMP Galinės km., Avižienių sen., Vilniaus raj. LT- 14025 El.paštas: [email protected] Contact person: Jurga Dabulevičiūtė, Tel.: +370-5-243-7153, +370-652-65651 E-mail: [email protected] www.emp.lt UAB EMP Recycling Galines kaimas, Maisiagalos pastas, Vilniaus raj., LT-14247, Lietuva Tel.:(+370) 5 2437153 Fax: (+370) 5 2469530 E-mail: [email protected] Language: Lithuanian, Russian, English AreaCountryDetails on the Service Center
39 Recycling information Poland CCR Polska sp. z o.o. ul. Solec 38 PL 00-394 Warszawa Tel.: +48 22 2138 200 Fax: +48 22 2138 201 www.erp-recycling.org EMP Electronik Recycling Poland Polska. Gdansk. Wrzeszcz ul. Czarna 1 Tel.: +48 58 345 42 18 Fax: +48 58 345 42 18 www.recycling-system.pl/gb/index.php Romania Darer Electronics Tel.: +40-259-342431 Contact person: Darius Tet E-mail: [email protected] www.darer.ro Slovenia Surovina d.d. Ul. Vila Kraigherja 5, 2001 Maribor, Slovenia Tel.: +386 2 250 70 10 E-mail: [email protected] www.surovina.si AreaCountryDetails on the Service Center
40 Regulatory Statements Regulatory Statements Accessibility Requirements for Rehabilitation Act of 1973, Sec- tion 508 BenQs commitment to accessible products allows us to support government in making accessible technology choices. BenQs LCD monitors and projectors are compliant with Section 508 guidelines by including the assistive features as below: • BenQs monitors have colored Power indicators. While the indicator shows green, it means that the monitor is using the full power. While the indicator shows yellow or amber, it means that the monitor is in suspend or sleep mode and is using less than 2 watts of electricity. • BenQs monitors have a variety of settings of pre-programmed flicker-free timing to make the screen shown on the monitor readily accessible. The default timing setting is automatically turned on every time the monitor is powered up, and thus reduces the hassle of user intervention. • BenQs monitors and projectors have options for brightness and contrast adjustments that text and images could be displayed differently to meet the demands of the visually impaired. Other similar adjustments are also available by using the On-Screen Display (OSD) controls on the products. • BenQs monitors and projectors include user-selectable color controls, such as color temperature selections (Monitor: 5800K, 6500K and 9300K, Projector: 5500K, 6500K, 7500K and 9300K), with a wide range of contrast levels. • BenQs multimedia monitors and projectors usually have one or two speakers for audio performance which allow users (including hearing impaired) to interact with the computer systems connected. Speaker controls are typically located on the front-panel. • Firmware of BenQs monitors and projectors contain unique product information that helps computer systems to identify BenQ products and activate their Plug-and-Play function when connected. • All BenQs monitors and projectors are compatible with the PC99 standard. For example, connectors are color-coded to help users easily connecting products to computer systems correctly. • Some models of BenQs monitors and projectors contain additional USB and DVI ports for connection to more devices such as a special headphone to assist the hearing impaired. • All BenQ monitors and projectors come with user manuals on compact discs which could be easily read by commercial software such as Adobe Reader via a connected computer system. These documents are also available on the BenQs web site ( www.BenQ.com). Other types of documents may be available upon requests. • BenQs customer service provides answers and assistance to all our customers through phone calls, facsimiles, e-mails, or web sites.