Brother DCP 8020 User Manual
Have a look at the manual Brother DCP 8020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PAPER 2 - 9 To load paper or other media in the multi-purpose tray (MP tray) (For DCP-8025D) 1Open the MP tray and lower it gently. 2Pull out and unfold the MP tray support flap. 3When loading paper in the MP tray, make sure it touches the back of the tray. When printing envelopes and labels you should only use the multi-purpose tray. Make sure that the paper is straight and in the proper position on the MP tray. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam. MP tray support flap
2 - 10 PAPER 4While pressing the paper-guide release lever, slide the paper guide to fit the paper size. You can place up to 3 envelopes or up to 50 sheets of 80 g/m2 or 20 lb paper in the MP tray. When you put paper in the MP tray, please remember the following: ■The side to be printed on must be face up. ■During printing, the inside tray rises to feed paper into the DCP. ■Put the leading edge (top of the paper) in first and push it gently into the tray.
PAPER 2 - 11 To use Automatic Duplexing for copy and print operations (For DCP-8025D) If you want to print on both sides of the paper using the Duplex feature for copy or print, you will need to set the Paper Adjustment Lever to the size of paper you are using. This feature is available for A4, Letter or Legal size paper. (See Duplex/N in 1 on page 5-11 and Two-sided printing (Duplex Printing) on page 6-3.) 1Load paper in the Paper Tray or Multi-purpose Tray. 2Set the Paper Adjustment Lever for Duplex Printing, in the back of the DCP, to match your paper size. 3Your DCP is now ready to print two-sided pages. LTR/LGL A4
3 - 1 ON-SCREEN PROGRAMMING 3 User-friendly programming Your DCP is designed to be easy to use with LCD on-screen programming using the navigation keys. User-friendly programming helps you take full advantage of all the menu selections your DCP has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your DCP. All you need to do is follow the instructions as they guide you through the menu selections and programming options. Menu table You can probably program your DCP without the User’s Guide. But to help you understand the menu selections and options that are found in the DCP programs, use the Menu table on page 3-4. You can program your DCP by pressing Menu followed by the menu number. For example: to set Quality to Photo, press Menu, 2, 1 and or to select Photo, and then press Set. On-screen programming
ON-SCREEN PROGRAMMING 3 - 2 Navigation keys You can access the menu mode by pressing Menu. When you enter the menu, the LCD scrolls. Press 1 for General Setup menu —OR— Press 2 for Copy menu —OR— Press 3 for Printer menu —OR— Press 4 for LAN menu (Only for the optional LAN board (NC-9100h) is installed.) —OR— You can scroll more quickly through each menu level by pressing the arrow for the direction you want: or . Then set an option by pressing Set when that option appears on the LCD. * Access the menu * Go to the next menu level * Accept an option * Exit the menu by pressing repeatedly * Go back to the previous menu level * Scroll through the current menu level * Go back to the previous menu level * Go forward to the next menu level * Exit the menu 1.General Setup 2.Copy 3.Printer 4.LAN Select ▲▼ & Set
3 - 3 ON-SCREEN PROGRAMMING The LCD will then show the next menu level. Press or to scroll to your next menu selection. Press Set. When you finish setting an option, the LCD shows Accepted. Use to scroll backward if you passed your choices or want to save keystrokes. The current setting is always the option with “ ”.
ON-SCREEN PROGRAMMING 3 - 4 Main MenuSubmenuMenu SelectionsOptionsDescriptionsPage 1. General Setup1.Paper Type 1.MP Tray (DCP-8025D)Thin Plain Thick Thicker Transparency Sets the type of paper in the Multi-purpose tray.4-1 2.Tray #1 (For DCP-8020, this menu does not appear.)Thin Plain Thick Thicker Transparency Sets the type of paper in paper tray #1.4-1 3.Tray #2 (option)Thin Plain Thick Thicker Transparency Sets the type of paper in paper tray #2.4-1 2.Paper Size 1.Tray #1 (This menu only appears if you have the optional tray #2.)A4 Letter Legal Executive A5 A6 B5 B6Sets the size of paper in paper tray #1.4-3 2.Tray #2 (option)A4 Letter Legal Executive A5 B5 B6Sets the size of paper in paper tray #2.4-3 The factory settings are shown in Bold with . to acceptto exit Press the Menu numbers. (ex. Press 1, 1 for Paper Type) —OR— to select to select
3 - 5 ON-SCREEN PROGRAMMING Main MenuSubmenuMenu SelectionsOptionsDescriptionsPage 1. General Setup (Continued)3.Beeper—High Med Low OffAdjusts the volume level of the beeper.4-4 4.Ecology 1.Toner SaveOn OffIncreases the life of the toner cartridge.4-4 2.Sleep Time(00-99) 05MinConserves power. 4-5 5. Tray Use: Copy (For DCP-8020, this menu does not appear.) (If you have the optional tray#2, see page 3-9.)—Tray#1 Only MP Only AutoSelects the tray that will be used for Copy mode.4-6 5.LCD Contrast ( For DCP-8020)6.LCD Contrast (For DCP-8025D)(If you have the optional tray#2, see page 3-9.)—- + - + - + - + - +Adjusts the contrast of the LCD.4-7 6.Drum Life ( For DCP-8020)7.Drum Life(For DCP-8025D)(If you have the optional tray#2, see page 3-9.)— — You can check the percentage of drum life that remains available.14-34 The factory settings are shown in Bold with . to acceptto exit Press the Menu numbers. (ex. Press 1, 1 for Paper Type) —OR— to select to select
ON-SCREEN PROGRAMMING 3 - 6 Main MenuSubmenuMenu SelectionsOptionsDescriptionsPage 1 . General Setup (Continued) 7 .Page Counter(For DCP-8020)8 .Page Counter (For DCP-8025D)(If you have the optional tray#2, see page 3-9.) — Total Copy Print ListLets you check the number of total pages the DCP has printed so far. 14-34 8 . User Settings (For DCP-8020)9 .User Settings (For DCP-8025D)(If you have the optional tray#2, see page 3-9.) — — You can print lists. 4-7 0 .Local Language (Canada Only) — English FrenchAllows you to change the LCD Language for your country. See Quic k Setup Guide 2 .Copy 1 .Quality Text Photo AutoSelects the Copy resolution for your type of original. 5-17 2 .Contrast —- + - + - + - + - + Adjusts the contrast for copies. 5-17 3 .Printer 1 .Emulation — Auto HP LaserJet BR-Script 3Selects the Emulation mode. 6-17 2 .Print Options 1 .Internal Font — Prints a list of the DCP’s internal fonts or current printer settings. 6-18 2 . Configuration—6-18 3 .Reset Printer — — Returns the DCP to the default settings.6-18 The factory settings are shown in Bold with . to acceptto exit Press the Menu numbers. (ex. Press 1, 1 for Paper Type) —OR— to select to select
3 - 7 ON-SCREEN PROGRAMMING If you installed optional LAN board (NC-9100h), the LCD shows the following LAN menu. (See the Network User’s Guide on the CD-ROM.) Main MenuSubmenuMenu SelectionsOptionsDescriptionsPage 4.LAN (option)1.Setup TCP/IP 1.BOOT MethodAuto Static RARP BOOTP DHCPYou can choose the BOOT method that best suits you needs. See Net work User’s Gui de on the CD- ROM. 2.IP Address[000-255]. [000-255]. [000-255]. [000-255] Enter the IP address. 3.Subnet Mask[000-255]. [000-255]. [000-255]. [000-255]Enter the Subnet mask. 4.Gateway[000-255]. [000-255]. [000-255]. [000-255]Enter the Gateway address. 5.Host NameBRN_XXXXXXEnter the Host name. 6.WINS ConfigAuto StaticYou can choose the WINS configuration mode. 7.WINS ServerPrimary SecondarySpecifies the IP address of the primary or secondary server. 8.DNS ServerPrimary SecondarySpecifies the IP address of the primary or secondary server. 9.APIPA On OffAutomatically allocates the IP address from the link-local address range. The factory settings are shown in Bold with . to acceptto exit Press the Menu numbers. (ex. Press 1, 1 for Paper Type) —OR— to select to select