Canon 1dx Owners Manual

							301
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Movies cannot be printed.
  The camera cannot be used  with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the  one provided.
  If there is a long beeping sound in st ep 5, it indicates a problem with the 
printer. Resolve the problem displa yed in the error message (p.308).
 You can also print RAW images  taken with this camera.
  If you use a battery pack  to power the camera, ma ke sure it is fully 
charged. With a fully-charged battery, pr inting up to approx. 4 hr. 30 min. 
is possible.
  Before disconnecting the cable, first tu rn off the camera and printer. Hold 
the plug (not the cord)  to pull out the cable.
  For direct printing, using AC Adapte r Kit ACK-E4 (sold separately) to 
power the camera is recommended.
COPY  
						

							302
The screen display and setting options will differ depending on the 
printer.  Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the  icon is 
displayed on the upper left of the LCD 
monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [Paper settings ], then press 
< 0 >.
X The paper setting screen will appear.
w Printing
Printer-connected icon
Print setting screen
* Depending on the printer,  certain settings such as date and file number 
imprinting and trimming  may not be selectable.Sets the printing effects (p.304).
Sets the date or file 
number imprinting to on 
or off.
Sets the quantity  to be printed.
Sets the trimming  (cropping) (p.307).
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout  you have set are displayed.
COPY  
						

							303
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print setting screen will reappear.
*1: From the Exif data, the camera name, lens name, shooting mode, shutter speed, 
aperture, exposure compensation amount , ISO speed, white balance, etc., will be 
imprinted.
*2: After ordering the prints with “Digital Print Order Format (DPOF)” (p.309), it is 
recommended that you print by following “Direct Printing with DPOF” (p.312).
Q Setting the Paper Size
Y Setting the Paper Type
U  Setting the Page Layout
Bordered The print will have white  borders along the edges.
BorderlessThe print will have no borders. If your printer cannot print 
borderless prints, the print will have borders.
Bordered cThe shooting information*1 will be imprinted  on the border on 
9x13 cm and larger prints.
xx-upOption to print 2, 4, 8, 9,  16, or 20 images on one sheet.
20-upc
35-up pTwenty or 35 images will be printe d as thumbnails on A4 or Letter 
size paper*2.
•   [20-up c] will have the shooting information*1 imprinted.
DefaultThe page layout will va ry depending on the printer model or its 
settings.
COPY  
						

							304
wPrinting
4Set the printing effects.
 Set if necessary. If you do not need to 
set any printing effects, go to step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option, then press < 0>.
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is highlighted next to 
< z >, you can also adjust the 
printing effect (p.306).
* When you change the printing effects, changes are reflected in the image 
displayed on the upper left. Note that  the printed image may look slightly 
different from the displayed image, whic h is only an approximation. This also 
applies to [Brightness] and [Adjust levels] on page 306.
Printing Effect Description
EOnThe image will be printed using the printer’s standard colors. 
The image’s Exif data is used  to make automatic corrections.
EOffNo automatic correction will be applied.
EVivid The image will be printed with  higher saturation to produce 
more vivid blues and greens.
ENRImage noise is reduced before printing.
0  B/WPrints in black-and-whi te with true blacks.
0 Cool tonePrints in black-and-white  with cool, bluish blacks.
0 Warm tonePrints in black-and-white wi th warm, yellowish blacks.
zNaturalPrints the image in the ac tual colors and contrast. 
No automatic color ad justments are applied.
zNatural MThe printing characte ristics are the same as the “Natural” 
setting. However, th is setting enables finer printing 
adjustments than with “Natural.”
EDefaultThe printing will differ dependin g on the printer. For details, 
refer to the printer’s instruction manual.
COPY  
						

							305
wPrinting
5Set the date and file number 
imprinting.
 Set if necessary.
  Select <
I>, then press .
  Set as desired, then press < 0>.
6Set the number of copies.
  Set if necessary.
  Select , then press < 0>.
  Set the number of copies, then press 
.
7Start printing.
  Select [Print ], then press < 0>.
When imprinting the shooting informat ion (p.303) of an image shot at ISO 
51200, H1, or H2, th e correct ISO speed may not be imprinted.
 The [ Default ] setting for printing effect s and other options are the 
printer’s own default settings as set  by the printer’s manufacturer. Refer 
to the printer’s instruction ma nual to find out what the [Default] settings 
are.
  Depending on the im age’s file size and image-recording  quality, it may 
take some time for the printing  to start after you select [Print].
  If image tilt correction (p.307) is appl ied, it may take longer to print the 
image.
  To stop the printing, press <
0> while [Stop ] is displayed, then select 
[ OK ].
  If you execute [ 54: Clear all camera settings ] (p.58), all the settings 
will revert to their defaults.
COPY  
						

							306
wPrinting
In step 4 on page 304, select the printing 
effect. When the < e> icon is highlighted 
next to < z>, you can press the 
< B > button. You can then adjust the 
printing effects. What can be adjusted or 
what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press 
the < B> button to change the position of 
the <
h>. Turn the < 5> dial to freely adjust 
the shadow level (0 - 127) or highlight level 
(128 - 255).
  kBrightener
Effective in backlit conditions that can make the subject’s face look 
dark. When [ On] is set, the face will be  brightened for printing.
  Red-eye corr.
Effective in flash images where t he subject has red eye. When [On] 
is set, the red eye will be corrected for printing.
e  Adjustment of Printing Effects
 The [kBrightener] and [Red-eye corr.] effects will not show on the screen.  When [Detail set. ] is selected, you can adjust the [ Contrast], 
[ Saturation], [ Color tone], and [Color balance ]. To adjust the [ Color 
balance ], use <
9>. B is for blue, A for amber, M for magenta, and G for 
green. The image’s color balance will be corrected tow ards the selected 
color.
  If you select [ Clear all], all the printing effect se ttings will be reverted to 
their defaults.
COPY  
						

							307
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.
Set the trimming right before printing. 
If you set the trimming and then set the 
print settings, you may have to set the 
trimming again before printing.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and aspect ratio.
 The image area within the tri mming frame will be printed. The 
trimming frame’s aspect ra tio can be changed with [
Paper settings].
Changing the trimming frame size
Turn the < 6> dial to change the trimming frame size. The 
smaller the trimming frame, the  larger the image magnification will 
be for printing.
Moving the trimming frame
Use  to move the frame over the image vertically or horizontally. 
Move the trimming frame so that it covers the desired image area.
Rotating the frame Pressing the < B> button will toggle the trimming frame 
between the vertical a nd horizontal orientations. This enables you 
to create a vertically oriented  print from a horizontal image.
Image tilt correction
By turning the < 5> dial, you can adjust the  image tilt angle up to 
±10 degrees in 0.5-degree increm ents. When you adjust the 
image tilt, the < O> icon on the screen will turn blue.
3 Press  to exit the trimming.
X The print setting screen will reappear.
  You can check the trimmed image area on the upper left of the 
print setting screen.
Trimming the Image
Tilt correction
COPY  
						

							308
wPrinting
 Depending on the printer,  the trimmed image area may not be printed as 
you specified.
  The smaller you set the trimming frame, the grainier the picture will look 
in the print.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no in k, no paper, etc.) and select [Continue] to 
resume printing but it does  not resume, operate the pr inter to resume printing. 
For details on resuming the printing, refer to the printer’s instruction manual.
Error MessagesIf a problem occurs during printing, an error me ssage will appear on the 
camera’s LCD monitor. Press  to stop printing . After fixing the 
problem, resume prin ting. For details on how to  fix a printing problem, refer 
to the printer’s instruction manual.
Paper Error Check whether th e paper is properly l oaded in the printer.
Ink Error Check the printer’s ink level,  and check the waste ink tank.
Hardware Error Check for any printer pr oblems other than paper and ink problems.
File Error The selected image cannot be printed via PictBridge. Images taken with 
a different camera or images edit ed with a computer may not be 
printable.
COPY  
						

							309
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to  all print-ordered images. (Settings 
cannot be set individually for each image.)
1Select [Print order].
 Under the [ 31] tab, select [Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, 
then press < 0>.
W Digital Print Order Format (DPOF)
Setting the Printing Options
[Print type][Date][File No.]
COPY  
						

							310
W Digital Print Order Format (DPOF)
4Exit the setting.
 Press the < M> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images  are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded date on the print.
Off
File numberOn[On ] imprints the file  number on the print.
Off
  Even if [ Date] and [ File No. ] are set to [ On], the date or file number may 
not be imprinted depending on the pr int type setting and printer model.
  With [ Index ] prints, the [ Date] and [ File No. ] cannot both be set to [ On] 
at the same time.
  When printing with DP OF, you must use the ca rd whose print order 
specifications have been set. It will  not work if you just extract images 
from the card and try to print them.
  Certain DPOF-compatible printers and  photofinishers may not be able to 
print the images as you sp ecified. If this happens with your printer, refer 
to the printer’s instruction manual . Or check with your photofinisher 
about compatibility wh en ordering prints.
  Do not insert into the camera a ca rd whose print order was set by a 
different camera and then try to spec ify a print order. The print order may 
not work or may be overwritten. Also , depending on the image type, the 
print order may not be possible.
RAW images and movies  cannot be print ordered. You can print RAW 
images with PictBridge (p.300).
COPY