Home > Canon > Camera > Canon 1dx Owners Manual

Canon 1dx Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon 1dx Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    of 420
    AI Servo characteristics: Tracking sensitivity, Acceleration/deceleration tracking, 
    AF point auto switching
    AF fine adjustment:
    AF Microadjustment (All lenses by  same amount or Adjust by lens)AF-assist beam: Emitted by the EO S-dedicated external Speedlite
    • Exposure ControlMetering modes:Approx. 100,000-pixel RGB metering sensor and 252-zone 
    TTL metering at max. aperture
    EOS iSA (Intelligent Subject Analysis) system
    • Evaluative metering (linked to all AF points)
    • Partial metering (a pprox. 6.5% of viewfinder at center)
    • Spot metering (approx. 2. 5% of viewfinder at center)
    • Center-weighted average metering
    Metering range:
    EV 0 - 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens, ISO 100)
    * Spot metering: EV 2 - 20
    Exposure control: Program  AE, Shutter-priority AE, Aperture-priority AE, 
    Manual exposure, Bulb exposure
    ISO speed: Auto ISO, manually se ttable within ISO 100 - 51200
    (Recommended (1/3-stop or whole-stop  increments), and expandable to L
    exposure index) (Equivalent to ISO 50 ), H1 (Equivalent to ISO 102400), 
    H2 (Equivalent  to ISO 204800)
    ISO speed settings: ISO speed range, Auto ISO range, and Auto ISO  minimum shutter speed settable
    Exposure compensation:Manual : ±5 stops in 1/3-  or 1/2-stop increments
    AEB : ±3 stops in 1/3- or 1/2- stop increments (Can be 
    combined with manual ex posure compensation)
    AE lock:Auto : Applied in One-Sh ot AF mode with evaluative 
    metering when focus is achieved
    Manual : By AE lock button
    Standard exposure level 
    adjustment: AE Microadjustment possible
    • Multiple ExposuresShooting method: Function/control prio rity, Continuous shooting priorityNumber of multiple exposures:2 to 9 exposuresMultiple-exposure control:Additive, Average, Bright, Dark
    •ShutterType:Electronically-controlled, focal-plane shutter
    Shutter speeds: 1/8000 sec. to 30 sec., Bulb (Total shutter speed range. 
    Available range varies by shooti ng mode.), X-sync at 1/250 sec.
    • Drive SystemDrive modes:Single, High-speed continuous, Low-speed continuous, 
    10-sec. self-timer, 2-sec. self-timer, Silent single 
    shooting, Super high-speed continuous
    Continuous shooting speed: Super  high-speed continuous shooting: Max. approx. 14 shots/sec.High-speed continuous shooting: Max. approx. 12 shots/sec.Low-speed continuous shooting: Max. approx. 3 shots/sec.*When the ISO speed is set to 32000 or higher (if the camera’s 
    internal temperature is low,  ISO 20000 or higher), the 
    maximum continuous sh ooting speed will be approx. 10 fps.
    Max. burst: JPEG Large: Approx. 100 shots  (approx. 180 shots)
    RAW: Approx. 35 shots (approx. 38 shots)
    RAW+JPEG Large: Approx. 17  shots (approx. 17 shots)
    * During high-speed  continuous shooting
    * Figures are based on Cano n’s testing standards (ISO 
    100 and Standard Picture St yle) and an 8 GB card.
    * Figures in parentheses appl y to an UDMA mode 7, 128 
    GB card based on Canon’s testing standards.
    • External SpeedliteCompatible Speedlites: EX-series Speedlites
    Flash metering: E-TTL II autoflash
    Flash exposure 
    compensation: ±3 stops in 1/3- or 1/2-stop increments
    FE lock: Provided
    PC terminal: Provided
    Standard flash exposure 
    level adjustment: FE Mi croadjustment possible
    External Speedlite control:Provided* Compatible with radio wireless flash photography.
    • Live View ShootingFocus modes: Live mode, Face detection Live mode (contrast 
    detection), Quick mode (phase-diffe rence detection), 
    Manual focusing (approx.  5x / 10x magnification 
    Focusing brightness range:EV 1 - 20 (with contrast detection, at 23°C/73°F, ISO 100)Metering modes: Evaluative me tering with the image sensor
    Metering range:EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)Silent shooting: Provided (Mode 1 and 2)
    Grid display: Three types
    • Movie ShootingMovie recording MPEG-4 AVC/H.264
    compression: Variable (average) bit rate
    Audio recording format: Linear PCM
    Recording format: MOV
    Recording size
    and frame rate: 1920x108 0 (Full HD) : 30p/25p/24p
    1280x720 (HD) : 60p/50p
    640x480 (SD) : 30p/25p
    * 30p: 29.97 fps, 25p: 25.0 0 fps, 24p: 23.976 fps,
    60p: 59.94 fps, 50p: 50.00 fps
    Compression method: A LL-I (I-only), IPB
    File size: 1920x1080 (30p/25p/24p)  / IPB : Approx. 235 MB/min.
    1920x1080 (30p/25p/24p) / ALL-I: Approx. 685 MB/min.
    1280x720 (60p/50p) / IP B : Approx. 205 MB/min.
    1280x720 (60p/50p ) / ALL-I : Approx. 610 MB/min.
    640x480 (30p/25p)  / IPB : Approx. 78 MB/min.
    Card reading/writing speed neces sary for movie shooting: 
    IPB: at least 10 MB per sec./A LL-I: at least 30 MB per sec.
    Focus modes: Same as focusi ng with Live View shooting
    Metering modes: Center-weighted aver age and Evaluative metering with 
    the image sensor
    * Automatically set by the focusing mode.
    Metering range:
    EV 0 - 20 (at 23°C/73°F with EF 50mm f/1.4 USM lens, ISO 100)Exposure control: 1. Autoexposure,  2. Shutter-priority AE, 3. Aperture-
    priority AE, 4. Manual exposure
    With 1, 2, and 3, exposure compensation and AE lock are possible.Exposure compensation:1/3-stop increments, ±3 stop s (±5 stops for still photos)
    ISO speed: P, Av, and BULB: 
    ISO 100 - 25600 set automatica lly, or ISO expansion to exposure index)H (equivalent to ISO 51200), H1 (equivalent to ISO 
    102400), H2 (equival ent to ISO 204800)
    Tv : ISO 100 - 25600 set automatically
    M : Auto ISO (ISO 100 - 256 00 set automatically), ISO 
    100 - 25600 set manually  (in 1/3- or whole-stop 
    increments), or ISO expansion to H (equivalent to 
    ISO 32000/40000/5 1200), H1 (equivalent to ISO 
    102400), H2 (equival ent to ISO 204800)
    Time code: Supported
    Drop frames: Compatible with 60p/30p
    Sound recording:Built-in monaural microphone, external stereo microphone terminal providedSound recording level adjustable, wind filter provided
    Grid display: Three types
    Still photo shooting: Possible
    • LCD MonitorType: TFT color, liquid-crystal monitor
    Monitor size and dots: Wide, 8.1 cm (3.2-i n.) (3:2) with approx. 1.04 million dots
    Brightness adjustment: Manual (7 levels)
    Electronic level: Provided
    Interface languages: 25
    Feature guide: Displayable
    Camera system status display:Provided
    • PlaybackImage display formats:Single-image display, Single-ima ge + Info display (Basic info, 
    shooting info, histogr am), 4-image index, 9-image index display
    Highlight alert: Overexposed highlights blink
    AF point display: Possible
    Grid display: Three types
    Zoom magnification:
    Approx. 1.5x - 10x, starting magnification and position settableImage browsing methods:Single image, jump by 10  or 100 images, by shooting 
    date, by folder, by movies, by stills, by rating
    Image rotate: Possible
    Ratings: Provided
    Movie playback: Enabled (LCD moni tor, video/audio OUT, HDMI OUT)
    Built-in speaker
    Slide show: All images, by  date, by folder, movies, stills, or by rating
    Image protect: Possible
    Voice memo: Recording /playback possible
    Copying images: Possible
    • Post-Processing of ImagesIn-camera RAW image 
    processing:Brightness correction, White balance,  Picture Style, Auto Lighting 
    Optimizer, High ISO speed no ise reduction, JPEG image-
    recording quality, Color space, Peripheral illumination correction, 
    Distortion correction, and Chromatic aberrati on correction
    • Direct PrintingCompatible printers: PictBridge-compatible printers
    Printable images: JPEG and RAW images
    Print ordering: DPOF V ersion 1.1 compatible
    • Wired LANEthernet:10BASE-T, 100BASE-TX, 1000BASE-T
    FTP transfer: Automatic transfer upon shooting, Image selection/
    transfer, Transfer with SET button, Transfer with caption
    EOS Utility: EOS Utility’s remote control works with wired LAN
    WFT server: Camera control, simple control, basic shooting, image 
    viewing, and downloading
    Media server: DLNA-compatible
    Multi camera time Master camera can sy nchronize time with up to 10 slave
    sync function: cameras Time error of approx. ±0.0 5 sec. between master and 
    slave cameras
    • Image TransferTransferrable images: Still photos (J PEG, RAW, RAW+JPEG images), Movies
    • Custom FunctionsCustom Functions: 31
    Save camera settings: Up to ten sets can be registered in a card
    Custom shooting modes:Register under Mode Dial’s C1/C2/C3
    My Menu registration: Possible
    Copyright information: Entr y and inclusion enabled
    • InterfaceAudio/video OUT/ Analog video (Compa tible with NTSC/PAL)/stereo audio
    Digital terminal: output Personal computer communica tion, Direct printing (Hi-
    Speed USB or equivalent), GPS Receiver GP-E2 connectionHDMI mini OUT terminal:Type C (Auto switching of resolution), CEC-compatible
    External microphone 
    IN terminal: 3.5 mm stereo mini-jack
    Remote control terminal:Compatible with N3-t ype remote controller
    Ethernet terminal: RJ-45 termin al, gigabit Ethernet compatible
    System extension terminal:For Wireless File Transmitter WFT-E6 and GPS Receiver 
    •PowerBattery:Battery Pack LP-E4N/LP-E4 (Quantity 1)
    * AC power can be supplied  via AC Adapter Kit ACK-E4
    Battery information:
    Remaining capacity, Shutter count, and Recharge performance displayedBattery life: With viewfinder shooting:
    (Based on CIPA Approx. 1120 shots at 23°C/73°F, approx. 860 shot s at 0°C/32°Ftesting standards) With Live View shooting:Approx. 290 shots at 23°C/73°F, approx. 250 shots at 0°C/32°FMovie shooting time: Approx. 2 hr. 10 min. at 23°C/73°F
    Approx. 2 hr. at 0°C/32°F
    * With a fully-charge d Battery Pack LP-E4N
    Date/Time battery: CR2025 lithium battery (Quantity 1)
    • Dimensions and WeightDimensions (W x H x D):Approx. 158.0 x 163.6 x 82.7  mm / 6.2 x 6.4 x 3.3 in.
    Weight: Approx. 1530 g / 54.0 oz . (CIPA Guidelines), Approx. 
    1340 g / 47.3 oz. (Body only)
    • Operation EnvironmentWorking temperature range:0°C - 45°C / 32°F - 113°F
    Working humidity: 85% or less
    • Battery Pack LP-E4NType: Rechargeable lithium-ion battery
    Rated voltage: 11.1 V DC
    Battery capacity: 2450 mAh
    Dimensions (W x H x D):Approx. 68.4 x 34.2 x 92.8  mm / 2.7 x 1.3 x 3.7 in.
    Weight: Approx. 185 g / 6.5 oz. (excluding protective cover)
    • Battery Charger LC-E4NCompatible battery packs:Battery Pack LP-E4N, LP-E4
    Recharging time: LP-E4N: A pprox. 130 min. (for 1 pack), LP-E4: Approx. 
    120 min. (for 1 pack)
    Rated input: 100 - 24 0 V AC (50/60 Hz)
    12 V / 24 V DC
    Rated output: 12.6 V DC, 1.55 A
    Power cord length: Approx. 2 m / 6.6 ft.
    Working temperature range:0°C - 40°C / 32°F - 104°F
    Working humidity: 85% or less
    Dimensions (W x H x D):Approx. 155 x 52.8 x 95  mm / 6.2 x 2.1 x 3.7 in.
    Weight: Approx. 350 g / 12.3 oz . (excluding power cord and 
    protective covers)
     All the data above is base d on Canon’s testing stand ards and CIPA (Camera & 
    Imaging Products Association) testing standards and guidelines.
      Dimensions, maximum diameter, length and weight listed ab ove are based on 
    CIPA Guidelines (except weig ht for camera body only).
      Product specifications and  the exterior are subject to change without notice.
      If a problem occurs with a  non-Canon lens attached to  the camera, consult the 
    respective lens maker.
    Trademarks Adobe is a trademark of Ad obe Systems Incorporated.
      Windows is a trademark or  registered trademark of Microsoft Corporation in the 
    United States and other countries.
      Macintosh and Mac OS are tr ademarks or registered trademarks of Apple Inc. 
    in the United States and other countries.
      CompactFlash is a trademar k of SanDisk Corporation.
      HDMI, HDMI logo, and High-D efinition Multimedia Interface are trademarks or 
    registered trademarks of HDMI Licensing LLC.
      All other corporate  and product names and trad emarks mentioned in this 
    manual are the property of  their respective owners.
    About MPEG-4 Licensing“This product is licensed under AT&T pate nts for the MPEG-4 standard and may be 
    used for encoding MPEG-4 compliant video  and/or decoding MPEG-4 compliant video 
    that was encoded only (1) for a personal  and non-commercial purpose or (2) by a 
    video provider licensed under the AT&T pat ents to provide MPEG-4 compliant video. 
    No license is granted or implied fo r any other use for MPEG-4 standard.”
    * Notice displayed in English as required.
    Use of genuine Canon accessories is recommended
    This product is designed to achieve excellent performance when used with 
    genuine Canon accessories.  Canon shall not be liable for any damage to this 
    product and/or accidents such as fire,  etc., caused by the malfunction of non-
    genuine Canon accessories (e.g., a leak age and/or explosion of a battery 
    pack). Please note that this warranty does not apply to repairs arising out of the 
    malfunction of non-genuine  Canon accessories, although you may request 
    such repairs on a chargeable basis.
    Battery Pack LP-E4N is de signed for Canon products  only. Using it with an 
    incompatible battery c harger or product may resu lt in malfunction or 
    accidents for which Canon  cannot be held liable.
    Safety Warnings
    Follow these safeguards and use the equipment properly  to prevent injury, death, 
    and material damage.
    Preventing Serious Injury or Death
    • To prevent fire, excessive heat, chemic al leakage, and explosions, follow the 
    safeguards below:
    - Do not use any batteries, power sources, and accessories not specified in this 
    booklet. Do not use any home-made or modified batteries.
    - Do not short-circuit, disassemble, or modi fy the battery pack or back-up battery. Do 
    not apply heat or apply solder to the ba ttery pack or back-up battery. Do not expose 
    the battery pack or back-up battery to fire or water. And do not subject the battery 
    pack or back-up battery to strong physical shock.
    - Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not 
    mix new and old or different types of batteries.
    - Do not recharge the battery pack outside the allowable ambient temperature range  of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
    - Do not insert any foreign metallic objects in to the electrical contacts of the camera, 
    accessories, connecting cables, etc.
    • Keep the back-up battery away from children.  If a child swallows the battery, consult a 
    physician immediately. (Battery chemicals may harm the stomach and intestines.)
    • When disposing of a battery pack or back-up battery, insulate the electrical contacts 
    with tape to prevent contact with other metallic objects or batteries. This is to prevent 
    fire or an explosion.
    • If excessive heat, smoke, or fumes are emitted during battery pack recharging, immediately unplug the battery charger from the power outlet to stop the recharging 
    and prevent a fire.
    • If the battery pack or back-up battery leaks,  changes color, deforms, or emits smoke or 
    fumes, remove it immediately. Be ca reful not to get burned in the process.
    • Prevent any battery leakage from contacting your eyes, skin, and clothing. It can 
    cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or 
    clothing, flush the affected area with lots  of clean water without rubbing it. See a 
    physician immediately.
    • During the recharging, keep the equipment away from the reach of children. The c\
    ord  can accidentally choke the child or give an electrical shock.
    • Do not leave any cords near a heat source . It can deform the cord or melt the 
    insulation and cause a fire or electrical shock.
    • Do not fire the flash at someone driving a car. It may cause an accident.• Do not fire the flash near a person’s ey es. It may impair the person’s vision. When 
    using flash to photograph an infant, keep at least 1 meter away.
    • Before storing the camera or accessory wh en not in use, remove the battery pack and 
    disconnect the power plug. This is to prevent electrical shock, heat generation, and 
    • Do not use the equipment where there is flammable gas. This is to prevent an 
    explosion or fire.
    All Canon manuals Comments (50)

    Related Manuals for Canon 1dx Owners Manual