Home > Canon > Printer > Canon Imageclass Mf6160dw User Guide

Canon Imageclass Mf6160dw User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageclass Mf6160dw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							FT6-0759   (000)
    Getting StartedEn
    Mise en route Fr
    Introducción Es
    Introdução Pt
     
    						
    							X 13
    Limited Warranty Notice (US Only)
    X 2X 1
    X 1
     
    						
    							X 5X 1
    X 2
    X 1
    X 1
     
    						
    							Attach the Optional Cassette to the 
    Machine
    Option
    18 5/8
    (473 mm)
    17 3/8
    (441 mm)
    15 3/8
    (390 mm)
    2 3/4 
    (68 mm)
    10 3/8 
    (264 mm)
    17
    (431 mm)
    5 1/2
    (138 mm)
    ★ = 4″ (100 mm)
     
    						
    							EnglishTake the cassette from the carton, and remove 
    all packing materials, including shipping 
    tape before attaching the optional cassette 
    to the machine. Make sure the machine and 
    the optional cassette are facing in the same 
    direction when being attached. NOTE
    When moving the main unit, be sure to carry 
    it from front side by using the provided hand 
    grips on the left and right sides, as seen in the 
    illustration.
    Français Sortez la cassette de son carton et retirez 
    tous les matériaux d’emballage, y compris la 
    bande adhésive d’expédition, avant de 
    fi xer 
    la cassette en option sur l’unité principale. 
    Vérifi  ez que l’unité principale et la cassette en 
    option font face à la même direction lorsque 
    vous les  fi xez. REMARQUE
    Lorsque vous déplacez l’unité principale, veillez 
    à la transporter depuis l’avant en la tenant par 
    les poignées de transport à gauche et à droite, 
    comme dans l’illustration.
    Español
    Extraiga el casete de la caja y retire todo el 
    envoltorio, incluyendo la cinta adhesiva para 
    el transporte, antes de conectar el casete 
    opcional a la máquina. Asegúrese de que la 
    máquina y el casete opcional estén orientados 
    en la misma dirección cuando los conecte. NOTA
    A la hora de mover la unidad principal, 
    asegúrese de sujetarla por la parte delantera, 
    utilizando las asas situadas en los lados 
    derecho e izquierdo, tal y como se indica en la 
    ilustración.
    Português Antes de prender a gaveta opcional na 
    máquina, retire-a da caixa e remova todos 
    os material de embalagem, incluindo a 
    fi ta 
    de proteção de transporte. Certifi  que-se de 
    que a máquina e a gaveta opcional estejam 
    voltadas para a mesma direção ao prendê-la 
    na máquina. NOTA
    Ao mover a unidade principal, transporte-a 
    pela parte da frente usando as alças de 
    apoio dos lados direito e esquerdo, conforme 
    mostrado na ilustração. 
     
    						
    							6
    Índice Contenido Table des matières Contents
    About the Supplied Manuals .....................................8
    Navigating the Menu and Text Input Method .............8
    Connecting the Power Cord and Turning ON 
    the Power ..................................................................9
    Specifying the Initial Settings ....................................9
    Choosing the Method to Connect the Machine to 
    the Computer ............................................................9
    Choosing the Method to Connect: 
    Via Wireless LAN or Other Method ...........................9
    Connecting via a Wired LAN ...................................10Connecting via a USB Cable...................................10
    Connecting via a Wireless LAN ...............................10
    Setting Wireless LAN ..............................................11
    Setting a Paper Size and Type ................................13
    Specifying Initial Fax Settings and Connecting 
    a Telephone Cable  .................................................13
    Installing the Driver/Software ..................................13
    Perform Useful Tasks ..............................................14
    Clearing Paper Jams...............................................15
    Replacing Toner Cartridge ......................................16
    A propos des manuels fournis .................................22
    Navigation dans le menu et méthode de saisie du 
    texte ....................................................................\
    ....22
    Branchement du cordon d’alimentation et mise 
    sous tension............................................................23
    Confi  guration des réglages initiaux .........................23
    Choix de la méthode de connexion de la machine 
    à l’ordinateur ...........................................................23
    Choix de la méthode de connexion : 
    par réseau sans  fi l ou via une autre méthode ..........23
    Connexion via un réseau  fi laire ...............................24 Connexion via un câble USB ..................................24
    Connexion via un réseau sans 
    fi l.............................24
    Confi  guration du réseau sans  fi l ..............................25
    Réglage du format et du type de papier ..................27
    Confi  guration des réglages de fax initiaux et 
    connexion d’un câble téléphonique  ........................27
    Installation du pilote et/ou du logiciel ......................27
    Procédures utiles ....................................................28
    Résolution des bourrages papier ............................29
    Remplacement de la cartouche d’encre .................30
    Acerca de los manuales suministrados ...................36
    Navegación por el menú y método de introducción 
    de texto ...................................................................36
    Conexión del cable de alimentación y encendido 
    del interruptor de alimentación ................................37
    Especifi  cación de la con fi guración inicial ................37
    Selección del método para conectar la máquina 
    al ordenador ...........................................................37
    Selección del método de conexión: 
    a través de red LAN inalámbrica u otro método ......37
    Conexión mediante una red LAN cableada ............38 Conexión con un cable USB ...................................38
    Conexión mediante una red LAN inalámbrica .........38
    Confi
     guración de LAN inalámbrica .........................39
    Ajuste del tamaño y el tipo del papel .......................41
    Especifi  cación de la con fi guración inicial de fax y 
    conexión del cable del teléfono  ..............................41
    Instalación del controlador/el software ....................41
    Tareas útiles ............................................................42
    Eliminación de atascos de papel ............................43
    Sustitución del cartucho de tóner ............................44
    Sobre os manuais fornecidos .................................50
    Navegação pelo menu e pelo método de entrada 
    de texto ...................................................................50
    Como conectar o cabo de alimentação e ligar 
    a máquina ...............................................................51
    Especifi  cação das con fi gurações iniciais ................51
    Escolha do método de conexão da máquina ao 
    computador ............................................................51
    Escolha do método de conexão: 
    por LAN sem fi  o ou outro método ...........................51
    Conexão via LAN com  fi o........................................52 Conexão via cabo USB ...........................................52
    Conexão via LAN sem 
    fi o ........................................52
    Confi  guração da LAN sem  fi o 
     .................................53
    Confi  guração do tamanho e do tipo de papel .........55
    Especifi  cação das con fi gurações iniciais do fax e 
    conexão do cabo telefônico  ...................................55
    Instalação do driver/software ..................................55
    Tarefas úteis ............................................................56
    Eliminação de obstruções de papel ........................57
    Substituição do cartucho de toner ..........................58
     
    						
    							7
     
    						
    							8
    En
     Navigating the Menu and Text Input Method
    ▲▼◀▶OK
    Menu Back#CNumeric keys
    About the Supplied Manuals
    
    Getting Started (This manual):
    Read this manual  fi rst. This manual 
    describes the installation of the 
    machine, the settings, and a caution. 
    Be sure to read this manual before 
    using the machine.
      MF Driver Installation Guide 
    (User Software and Manuals CD-
    ROM):
    Read this manual next. This manual 
    describes software installation.
      Send Setting Guide
    (User Software and Manuals CD-
    ROM):
    Read this section for how to set Send 
    features.
      e-Manual 
    (User Software and Manuals CD-
    ROM):
    Read the desired chapter to suit your 
    needs. The e-Manual is categorized by 
    subject to fi  nd desired information easily.
    Viewing the e-Manual from the CD-ROM
    1  Insert the User Software and Manuals CD-ROM in your computer.
    2 Click [Manuals].
    3 Click [e-Manual].
      Depending on the operating system you are using, a security protection message appears. 
       If the User Software and Manuals CD-ROM has been already inserted in your computer 
    and [Manuals] is not displayed, remove the CD-ROM and insert it again.
    Navigating the Menu
    Item selection or moving the 
    cursor among the menu items
    Select an item with [ ▲] or [▼]. 
    Proceed to the next hierarchy with 
    [OK] or [ ▶]. Return to the previous 
    hierarchy with [ 
     ] (Back) or [◀].
    Setting con fi rmation
    Press [OK]. However, when  
    appears on the display, select 
    , and then press [OK].
    Text Input Method
    Changing entry mode
    Press [▼] to select , 
    and then press [OK]. You can also 
    press [ 
     ] (Tone) to change the 
    entry mode.
    Entering text, symbols, and 
    numbers
    Enter with the numeric keys or 
    [ 
     ] (SYMBOLS).
    Moving the cursor (Entering a 
    space)
    Move with [◀] or [▶]. Move the cursor 
    to the end of the text and press [▶] to 
    enter a space.
    Deleting characters
    Delete with [ 
     ] (Clear). Pressing 
    and holding [  ] (Clear) deletes all 
    characters.
    Entering text, symbols, and 
    numbers
    Entry mode: 
     Entry mode: 
     Entry mode: 
    
    @ . - _ / 1
    ABC abc 2
    DEF def3
    GHI ghi4
    JKL jkl5
    MNO mno 6
    PQRS pqrs 7
    TUV tuv 8
    WXYZ wxyz 9
    (Not available)0
    - . * # ! “ , ; : ^ ` _ = / | ‘ ? $
    @ % & +  ˜ ( ) [ ] { } < >  (Not 
    available)
    Changing entry mode
    Entry mode Available text
     Uppercase alphabetic letters 
    and symbols
     Lowercase alphabetic letters 
    and symbols
     Numbers
     
    						
    							9
    En
    Connecting the Power Cord and Turning 
    ON the Power
    (2)
    (1)
      Do not connect the USB cable at this time. Connect it when installing software.
    Specifying the Initial Settings
    Follow the instructions on the screen, set the language and 
    time. For details on navigating the menu and how to input 
    the numbers, see “Navigating the Menu and Text Input 
    Method” (
      P.8).
    Language
     English
     French
     Spanish 
     PortugueseCurrent Time Settings
    01/01/2011 12:5 2 AM
    NOTE
    •  About 
    The time zone setting indicates the time di ff erence 
    between your local time zone and Greenwich Mean 
    Time (GMT). The correct time zone setting is required 
    for Internet communications.
    In the U.S.:
    Eastern Standard Time(EST): GMT-5
    Central Standard Time(CST): GMT-6
    Mountain Standard Time(MST): GMT-7
    Paci fi c Standard Time(PST): GMT-8
    Choosing the Method to Connect the 
    Machine to the Computer
     
    ●Connecting via a Wired LAN
    You can connect the machine to the computer through a 
    wired router. Use the LAN cables to connect the machine 
    to the wired router (access point).
       Make sure that there is an available port in the router to connect 
    the machine and the computer.
       Have a LAN Cable of Category 5 twisted-pair cable or higher ready.  
    ●
    Connecting via a USB cable
    You can connect the machine to the computer using a 
    USB cable.
       Make sure that the USB cable you use has the following mark.
     
    ●Connecting via a Wireless LAN
    You can connect the machine to the computer through 
    a wireless router*. Since it is connected to wireless, no 
    LAN cables are needed.
    *  A wireless router (access point), which supports IEEE802.11b/
    g/n, is required.
    Check if your router has a button
    Select from the following two methods depending on 
    the router (access point) that you are using.
     
    ●There is a button.
    You can easily setup if your router (access point) 
    has a button, and if the mark is on the router. 
     
    ●There is no button.
    If there is no button on your router (access point), 
    you may manually select SSID and complete the 
    settings.
       If you are looking to install your new device via a Wireless 
    Network connection, you can  fi nd a video and written guides 
    with step-by-step instruction to assist you through the process 
    from the following URL:
    www.usa.canon.com/WirelessHelp
    Viewing these guides will ensure a smooth setup of the device 
    into your existing wireless environment.
    Choosing the Method to Connect: 
    Via Wireless LAN or Other Method
    Use wireless LAN to 
    connect computer?
    (Can config. later.)
    No
    Yes
    Ye s
    No
     
    ●There is a button.  Start from step 4 of “Push Button Mode” (P.11). 
    ●There is no button.  Start from step 4 of “Setting the Access Point 
    Manually” (P.12).
    Connect to the computer via a wired LAN
      Proceed to “Connecting via a Wired LAN” (P.10).
    Connect to the computer via a USB cable
      “Connecting via a USB Cable” (P.10).
    Connect to the computer via a wireless LAN later
      Proceed to “Connecting via a Wireless LAN” (P.10).
     
    						
    							10
    En
     Connecting via a Wired LAN
    Checking Before the Setup
    InternetRouter
    or
    hub
    LAN cable
    Is the computer and the router (or hub) properly 
    connected using a LAN cable?
    For more information, see the instruction manual for the 
    network device you are using, or contact the networking 
    device manufacturer.
    Has the network settings on the computer been 
    completed?
    If the computer is not properly con fi gured, you may not 
    use the wired LAN connection even after completing the 
    following settings.
    NOTE
    •  You cannot connect both the wired LAN and wireless  LAN at the same time. In addition, the machine is set 
    to the Wired LAN by default.
    •  When you connect to a network environment that  is not security protected, your personal information 
    could be disclosed to third parties. Please use 
    caution.
    •  If you connect through a LAN in the o ffi  ce, contact 
    your network administrator.
    Connecting via a Wired LAN
    1 Connect the LAN cable.
    The IP address will be automatically con fi gured in 2 
    minutes. If you want to set the IP address manually, see 
    the following items.
      e-Manual “Network Settings”  ▶ “Basic Network 
    Settings” ▶ “Setting the IP Address”
    2 Install the driver and software using the User 
    Software and Manuals CD-ROM.
     See “Installing the Driver/Software” (P.13).
     Proceed to “Setting a Paper Size and Type” (P.13).
     Connecting via a USB Cable
    Connect the USB cable after installing the MF Drivers and 
    the MF Toolbox.
    NOTE
    •  If you connected the USB cable before installing the  MF drivers, refer to the MF Driver Installation Guide.
    1 Install the driver and software using the User 
    Software and Manuals CD-ROM.
     See “Installing the Driver/Software” (P.13).
    2 Connect the USB cable.
     Proceed to “Setting a Paper Size and Type” (P.13).
     Connecting via a Wireless LAN
    Checking Before the Setup
    Wireless LAN Router
    Internet
    Is the computer connected to the router (access 
    point) correctly by a LAN cable or wireless LAN?
    For more information, see the instruction manual for the 
    network device you are using, or contact the networking 
    device manufacturer.
    Has the network settings on the computer been 
    completed?
    If the computer is not properly con fi gured, you may not use 
    the wireless LAN connection even after completing the 
    following settings.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageclass Mf6160dw User Guide