Canon Imageformula Dr C130 User Guide

							Setup Guide
Guide de configuration
Guía de instalación
EN
FR
ES
0-00-DR-C130_SG_E3.book  Page 1  Friday, March 16, 2012  9:31 AM
 
						

							1
DR-C130 Setup Guide
Please read first.
Checking the Accessories
DR-C130
Setup Guide
(this document)
Warranty 
Card
(U.S.A and Canada only) Feed Roller
(Attach this roller to the  scanners main unit.) USB Cable
Type A/Type B 
(Length: 1.8 m) AC Adapter/Power Cord
(Connected length: 2.6 m)
Setup Disc
(DVD-ROM)
• Items included in this manual are  subject to change without notice.
• You must keep the machines packaging and packing ma terials for storing or transporting the machine.
• The shape of the power plug varies by country and region.Remove the scanner from the box, and remove the orange tape and protective sheets ( ▼) from the scanner.
The contents may vary by country/region.
If any of the items listed below are missing or damaged, contac
t your local authorized Canon dealer or service representative.
Thank you for purchasing the Canon im
ageFORMULA DR-C130 Document Scanner.
This document is a setup guide for the scanner. Be sure to read these instructions before using this product. After reading, store the manual in a
safe place for future reference.
Cautions to use the product safely are noted on Important Safety  Instructions (P.8). Be sure to read these instructions before using this product. 
DR-C130_SG.fm  Page 1  Friday, March 16, 2012  8:54 AM
 
						

							2
1
Slide the document guides to the 
left and right, and open the roller 
cover.
2
Fit the feed roller in the unit by 
aligning the notch on the roller 
with the shaft on the unit.
3
Close the roller cover. It is 
properly closed when you hear a 
click.
4
Gently press on the sides of the 
front unit to close it. It is properly 
closed when you hear a click.
STEP 
2
Installing the Feed Roller
document  guides
roller cover
DR-C130_SG.fm  Page 2  Fr iday, March 16, 2012  8:54 AM
 
						

							3
Install the following software necessary for using the scanner from
the supplied Setup Disc (DVD-ROM).
• CaptureOnTouch This is a dedicated scanning utility for this product.
• CapturePerfect 3.1
This is a scanning applicati on for the DR series scanner.
• Scanner Driver This is the scanner driver for this product.
• User Manual The supplied Setup Disc contains  a manual that explains the 
overall operation on the scanner. You can open the manual from 
[Canon DR-C130] in the Windows Start menu, after the software 
is installed.
Third-Party Software
The following software applications  are also included on the supplied
Setup Disc. • Presto! BizCard Business card management software from NewSoft 
TechnologyCorp. 
* Presto! BizCard is a registered trademark of NewSoft 
Technology Corp.
• OmniPage SE Optical character recognition (OCR) software from NuanceCommunications Inc. with multiple language support.
The languages supported by the OmniPage software bundled 
with this scanner are English,  French, German, Italian, and 
Spanish. The software cannot be in stalled on operating systems 
of other languages.
• PaperPort
® 
File management application from Nuance Communications Inc.
that makes it easy to store, organize, and retrieve digital 
documents.
In order to receive support of this product, you need to upgrade to
a Professional version. For de tails on upgrading, visit the 
following URL. http://www.nuance.com/partneroffer/canon
• eCopy PDF Pro Office
Nuance Communications PDF creation/editing software.
Important
When scanning with third-party so ftware, user the scanner driver 
of this scanner to configure sc anning conditions. For details on 
how to open the scanner driver, refer to the manuals supplied with 
each software application.
Cloud Service Software
For some of the supplied third-party software, a cloud service
account is required to use some  or all of their functions.
You will be asked to agree to terms of service when obtaining an 
account. For details, refer to t he website of your cloud service 
provider.
Simple installation of the above software does  not require an 
account. Software Cloud service used
Google docs plug-in for
CaptureOnTouch
Google docs
Evernote Evernote
DR-C130_SG.fm  Page 3  Fr iday, March 16, 2012  8:54 AM
 
						

							4
System requirementsThe following system requirements are recommended for optimal use
of this scanner.•Computer• CPU:Intel Core 2 Duo 1.66 GHz or faster
• Memory:1 GB or more
• Hard disk:3 GB or more available space required for installation
of all software
• USB interface:Hi-Speed USB 2.0
• Monitor:Resolution of 1024 x 768 (XGA) or better recommended.
• Optical drive:Drive capable of reading DVDs.• Operating system• Microsoft Windows XP Service Pack 3 or later
• Microsoft Windows XP x64 Edition Service Pack 2 or later
• Microsoft Windows Vista Service Pack 2 or later (32-bit and 64-
bit editions)
• Microsoft Windows 7 Service Pack 1 or later (32-bit and 64-bit editions)• Other requirement• An ISIS-compatible application or a TWAINcompatible application that is compatible with the above operating systems.
• .NET Framework 3.5 or later
Important
• Use the latest USB 2.0 driver made available by Microsoft.
• Scanning speeds are lower if your computers standard USB  interface is USB Full-Speed (equal to USB 1.1.)
• The USB cable you are using  should be the one originally 
included with the scanner.
• If the CPU, memory, interface card, and other specifications do  not satisfy the installation requirements, the scanning speed may 
be greatly reduced and transmission may take a long time.
• Even if the computer satisfies the recommended specifications,  the scanning speed may vary, depending on the specified scan 
settings.
• The scanner drivers provided with the scanner do not necessarily  operate on all ISIS or TWAIN-compatible applications. For 
details, contact your appl ication software retailer.
Precautions for Use in 64-bit Operating Systems• The scanner driver supplied with  this product supports scanning 
with 32bit applications only.
• Even with 32-bit applications, not all ISIS/TWAIN compliant  applications are guaranteed to operate.
• Scanning speed may vary depending on the specifications of  your computer.
DR-C130_SG.fm  Page 4  Fr iday, March 16, 2012  8:54 AM
 
						

							5
1
Insert the Setup Disc into the disk 
drive of the computer.
2
Click [Typical Installation].
3
Click [Install].
4
Follow the instructions on the screen 
to complete installation.
5
Click [Exit] to finish installing.
Installing the Software
CAUTION
• Do not connect the scanner to the computer before installing the software.
• If you connect the scanner and turn it ON before you install the software, the following  wizard screen will appear. If this wizard is di splayed, click the [Cancel] button to exit the 
wizard, and turn the scanner OFF.
• Log on to Windows as an Administrator.
• Close all other applications before installing the software.
If the screen shown below is displayed,
enter the password for the user logged in
with administrative rights and click [OK].For Windows 7/Vista
DR-C130_SG.fm  Page 5  Fr iday, March 16, 2012  8:54 AM
 
						

							6
Connecting to a Computer
CAUTION• Be sure to use the supplied power cord and AC adapter. 
• Turn off the scanners power when connecting the scanner to 
the computer.
Use the supplied USB cable to connect the scanner to the PC.
Turning the Scanner ON
Power Button
The power indicator lights blue when the power is ON. Power Indicator
When the connection is done, press the power button to turn on the scanners power.
DR-C130_SG.fm  Page 6  Fr
iday, March 16, 2012  8:54 AM
 
						

							7
Use CaptureOnTouch to verify that you can perform the scanning operation.1
Open the feed tray gently.
2
Push the feed selection lever up 
(Normal mode).
3
Load the scan document with its 
backside facing forward, and 
adjust the paper guides to the 
width of document.
4
Press the scanners Start button.
5
The scan result is displayed on 
the CaptureOnTouch screen.
6
Click [Next] and specify how to 
save the scan results.
For details on the operation of 
CaptureOnTouch, see the User  
Manual.
Scanning
This completes setup.
DR-C130_SG.fm  Page 7  Fr iday, March 16, 2012  8:54 AM
 
						

							8
Installation LocationThe performance of this scanner is affected by the environment in
which it is installed. Make sure  that the location where the scanner is
installed meets the following environmental requirements.
• Provide adequate space around the scanner for operation,  maintenance, and ventilation.
• Provide adequate space in front of the scanner for documents 
output after being scanned.
• Avoid installing the machine in direct sunlight. If this is  unavoidable, use curtains to shade the scanner.
• Avoid locations where a considerable amount of dust  accumulates.
• Avoid warm or humid locations, such  as in the vicinity of a water 
faucet, water heater, or humidifier.
• Avoid locations where ammonia gas is emitted.
• Avoid locations near volatile or flammable materials, such as 
alcohol or paint thinner.
• Avoid locations that are subject to vibration.
• Avoid exposing the scanner to r apid changes in temperature. If 
the room in which the scanner is  installed is cold but rapidly 
heated, water droplets (condensation) may form inside the 
scanner. This may result in a noticeable degradation in scanning 
quality.
• The following conditions are recommended for optimal scanning 
quality:
• Room temperature: 10°C to 32.5 °C (50 °F to 90.5°F)
• Humidity: 20% to 80% RH
• Avoid installing the scanner near equipment that generates a  magnetic field (e.g. speakers,  televisions, or radios.)
AC Adapter• Connect only to a power outlet of the rated voltage and power 
supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz 
depending on your region).
• Do not connect other electrical equipment to the same power  outlet to which the scanner is c onnected. Also, when using an 
extension cord, make sure that the extension cord is rated for the 
current requirements of the scanner.
• Never disassemble or modify the AC adapter, as it is dangerous.
• The power cord may become damaged if it is often stepped on or  if heavy objects are placed on it. Continued use of a damaged 
power cord and AC adapter can lead to an accident, such as a 
fire or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the 
power cord, grasp the plug and remove it from the outlet.
• Keep the area around the power cord clear of objects so that the  power cord can be disconnected easily in an emergency.
• Do not use an AC adapter other than the one provided with the  scanner. Do not use the AC adapter provided with the scanner 
with other products.
• If you have any questions regardi ng the power supply, contact 
your local authorized Canon dealer or service representative for 
further information.
100mm
3.94 100mm
3.94
100mm
3.94
DR-C130_SG.fm  Page 8  Fr
iday, March 16, 2012  8:54 AM
 
						

							9
Moving the Scanner• When moving the scanner, always hold it with both hands to avoid dropping it. The scanner wei ghs approximately 1.8 kg (3.97 
lb).
• Make sure to disconnect the interface cable and AC adapter 
before moving the scanner. If the scanner is transported with 
these items connected, the plugs and connectors may be 
damaged.Handling
Warning
Note the following precautions  whenever using the scanner. Failure
to do so may result in a fire or electric shock. • Never use alcohol, benzene, paint  thinner, aerosol sprays, or any 
other highly flammable substance near the scanner.
• Do not cut, damage, or modify the power cord. Do not place  heavy objects on the power cord, and do not pull or excessively 
bend the power cord.
• Never connect the power cord when your hands are wet.
• Do not connect the scanner to a multi plug power strip.
• Do not knot or coil the power cord as this may result in a fire or  electric shock. When connecting t he power cord, make sure that 
the power plug is securely and completely inserted into the power 
outlet.
• Do not use a power cord or AC adapter other than the ones  provided with this scanner.
• Do not take the scanner apart or modify it.
• Never try to take the AC adapter apart or modify it in any way, as  this is dangerous.
• Do not use flammable spray near the scanner.
• When cleaning the scanner, turn the power OFF and disconnect 
the power cord from the power supply.
• Clean the scanner using a slightly dampened cloth which has  been well wrung out. Never use al cohol, benzene, paint thinner, 
or any other flammable substances.
• If the scanner makes strange noises, or gives off smoke, heat, or 
strange odors, or the scanner does not function or other 
abnormalities occur when you use the machine, immediately turn 
the power OFF, and disconnect the power plug from the power 
outlet. Then, contact your local authorized Canon dealer or 
service representative for further information.
• Do not drop the scanner, or subject it to impact or strong shock. 
Should the scanner ever become  damaged, immediately turn the 
power OFF, and disconnect the power plug from the power 
outlet. Then, contact your local authorized Canon dealer or 
service representative to have the unit serviced.
• Before moving the scanner, be sure to turn the power OFF, and  disconnect the power plug from the power outlet.
DR-C130_SG.fm  Page 9  Fr iday, March 16, 2012  8:54 AM