Canon network camera VBH43 User Manual
Here you can view all the pages of manual Canon network camera VBH43 User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
Detecting/Setting Cameras
2
31
Note
If a connection to the NTP server cannot be established because, for example, the IP address of the NTP server is incorrect, the
date and time are not changed.
The NTP server query interval is 300 seconds. If the time of camera and that of NTP server are substantially different, it tak es time
to complete synchronization.
(4) [NTP Server]
If you select [Auto-Setting of NTP Se rver] > [Disable], enter the IP address or host name of the NTP server.
(5) [Time zone]...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-30.png "Page 31
Detecting/Setting Cameras
2
31
Note
If a connection to the NTP server cannot be established because, for example, the IP address of the NTP server is incorrect, the
date and time are not changed.
The NTP server query interval is 300 seconds. If the time of camera and that of NTP server are substantially different, it tak es time
to complete synchronization.
(4) [NTP Server]
If you select [Auto-Setting of NTP Se rver] > [Disable], enter the IP address or host name of the NTP server.
(5) [Time zone]...")
Detecting/Setting Cameras 2 31 Note If a connection to the NTP server cannot be established because, for example, the IP address of the NTP server is incorrect, the date and time are not changed. The NTP server query interval is 300 seconds. If the time of camera and that of NTP server are substantially different, it tak es time to complete synchronization. (4) [NTP Server] If you select [Auto-Setting of NTP Se rver] > [Disable], enter the IP address or host name of the NTP server. (5) [Time zone]...
Page 32
![Page 32
32
Video
(1) [Video Size Set]
Set the set of video sizes to use with the camera.
(2) [H.264(2)] Select [Disable] to transmit only one stream of H.264 video.
Select [Enable] to transmit two streams of H.264 video.
(3) [H.264(1)]/[H.264(2)] Configure on each tab the settings for the H.264(1) and H.26 4(2) video to be transmitted from the camera to the
Viewer.
(4) [Video Size] Select the size for video transmitted from the camera.
(5) [Bit Rate Control] Set the bit rate for video.
When [Use bit rate...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-31.png "Page 32
32
Video
(1) [Video Size Set]
Set the set of video sizes to use with the camera.
(2) [H.264(2)] Select [Disable] to transmit only one stream of H.264 video.
Select [Enable] to transmit two streams of H.264 video.
(3) [H.264(1)]/[H.264(2)] Configure on each tab the settings for the H.264(1) and H.26 4(2) video to be transmitted from the camera to the
Viewer.
(4) [Video Size] Select the size for video transmitted from the camera.
(5) [Bit Rate Control] Set the bit rate for video.
When [Use bit rate...")
32 Video (1) [Video Size Set] Set the set of video sizes to use with the camera. (2) [H.264(2)] Select [Disable] to transmit only one stream of H.264 video. Select [Enable] to transmit two streams of H.264 video. (3) [H.264(1)]/[H.264(2)] Configure on each tab the settings for the H.264(1) and H.26 4(2) video to be transmitted from the camera to the Viewer. (4) [Video Size] Select the size for video transmitted from the camera. (5) [Bit Rate Control] Set the bit rate for video. When [Use bit rate...
Page 33
Detecting/Setting Cameras 2 33 You can use this tool to display the camera’s Setting Page or start Viewer. You can also check the operation and advanced settings of cameras whose basic settings have been configured. Depending on the computer environment, you may need to add the camera’s IP address as a trusted site in order to launch the Setting Page and Viewer. This tool ca n be used for the registration process. Note Regardless of which browser is set as the standard browser, Inte rnet Explorer is...
Page 34
![Page 34
34
Note
The settings configured on the Setting Page are saved to only the camera and are not reflected in this tool. After configuring the
settings, select the camera in the camera list of this tool and then click (Update Camera Information) on the toolbar to updat e
the settings in this tool.
Launching Viewer
You can launch Viewer to check the video of a camera for whi ch the basic settings and the settings of [Setting Page] are
finished.
Perform this operation by selectin g and setting one camera...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-33.png "Page 34
34
Note
The settings configured on the Setting Page are saved to only the camera and are not reflected in this tool. After configuring the
settings, select the camera in the camera list of this tool and then click (Update Camera Information) on the toolbar to updat e
the settings in this tool.
Launching Viewer
You can launch Viewer to check the video of a camera for whi ch the basic settings and the settings of [Setting Page] are
finished.
Perform this operation by selectin g and setting one camera...")
34 Note The settings configured on the Setting Page are saved to only the camera and are not reflected in this tool. After configuring the settings, select the camera in the camera list of this tool and then click (Update Camera Information) on the toolbar to updat e the settings in this tool. Launching Viewer You can launch Viewer to check the video of a camera for whi ch the basic settings and the settings of [Setting Page] are finished. Perform this operation by selectin g and setting one camera...
Page 35
![Page 35
Detecting/Setting Cameras
2
35
You can access Camera Angle Setting Tool and admin tools from this tool.
This operation can only be done with one camera at a time.
Note
The tools in the [Tools] menu that are not supported by the selected camera will appear grayed out. The tools may be included in a Setting
Page or as software that must be installed to the computer, de pending on the camera model. If they are included in a Setting Pa ge, the
corresponding Setting Page is displayed after entering the admi...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-34.png "Page 35
Detecting/Setting Cameras
2
35
You can access Camera Angle Setting Tool and admin tools from this tool.
This operation can only be done with one camera at a time.
Note
The tools in the [Tools] menu that are not supported by the selected camera will appear grayed out. The tools may be included in a Setting
Page or as software that must be installed to the computer, de pending on the camera model. If they are included in a Setting Pa ge, the
corresponding Setting Page is displayed after entering the admi...")
Detecting/Setting Cameras 2 35 You can access Camera Angle Setting Tool and admin tools from this tool. This operation can only be done with one camera at a time. Note The tools in the [Tools] menu that are not supported by the selected camera will appear grayed out. The tools may be included in a Setting Page or as software that must be installed to the computer, de pending on the camera model. If they are included in a Setting Pa ge, the corresponding Setting Page is displayed after entering the admi...
Page 36
36 Important To ensure security, exit Internet Explorer after completing the settings with Admin Tools.
Page 37
Chapter Camera Specification File Use The information displayed in the camera list of this tool can be saved and edited as a camera specification file. You can load camera specification files when the tool is launched, and use them to manage more than 64 cameras.
Page 38
![Page 38
38
The content of the camera list can be saved as a camera specification file in the CSV format. Saved camera specification
files can be configured to be loaded automatically upon next startup, or edited to be used for setting the camera.
Saving When Exiting the Tool
You can save a camera specification file when exiting th is tool. You can also specify whether to load the camera
specification file the next time the tool launches.
Note
If the [Enable camera specification file] checkbox is selected in...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-37.png "Page 38
38
The content of the camera list can be saved as a camera specification file in the CSV format. Saved camera specification
files can be configured to be loaded automatically upon next startup, or edited to be used for setting the camera.
Saving When Exiting the Tool
You can save a camera specification file when exiting th is tool. You can also specify whether to load the camera
specification file the next time the tool launches.
Note
If the [Enable camera specification file] checkbox is selected in...")
38 The content of the camera list can be saved as a camera specification file in the CSV format. Saved camera specification files can be configured to be loaded automatically upon next startup, or edited to be used for setting the camera. Saving When Exiting the Tool You can save a camera specification file when exiting th is tool. You can also specify whether to load the camera specification file the next time the tool launches. Note If the [Enable camera specification file] checkbox is selected in...
Page 39
![Page 39
Camera Specification File Use
3
39
Saving Using the Menu
Camera specification files can be saved using the following procedures while the tool is running.
The [Export Camera List] dialog box appears.
To include the administrator password when saving t he camera specification file, select [Save password.].
To also encrypt the administrator pa ssword when saving the camera spec ification file, select the [Encrypt
password.] checkbox.
Note
If you select the [Save password.] checkbox, the administrator pass...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-38.png "Page 39
Camera Specification File Use
3
39
Saving Using the Menu
Camera specification files can be saved using the following procedures while the tool is running.
The [Export Camera List] dialog box appears.
To include the administrator password when saving t he camera specification file, select [Save password.].
To also encrypt the administrator pa ssword when saving the camera spec ification file, select the [Encrypt
password.] checkbox.
Note
If you select the [Save password.] checkbox, the administrator pass...")
Camera Specification File Use 3 39 Saving Using the Menu Camera specification files can be saved using the following procedures while the tool is running. The [Export Camera List] dialog box appears. To include the administrator password when saving t he camera specification file, select [Save password.]. To also encrypt the administrator pa ssword when saving the camera spec ification file, select the [Encrypt password.] checkbox. Note If you select the [Save password.] checkbox, the administrator pass...
Page 40
![Page 40
40
Camera specification files saved in CSV can be edited with a spreadsheet software such as Excel, or a text editor such as
Notepad.
Camera Specification File Configuration
First line (header)
It is described as follows.
The “ContainsPass” value changes as follows depending on the settings of the [Export Camera List] dialog box at the
time of saving.
Described only when the “ContainsPass” value for t he [Common Authentication Administrator name = Common
Authentication Administrator Password] is “1”...](http://img.usermanuals.tech/thumb/14/1378/w300_network-camera-vbh43-1478295841_d-39.png "Page 40
40
Camera specification files saved in CSV can be edited with a spreadsheet software such as Excel, or a text editor such as
Notepad.
Camera Specification File Configuration
First line (header)
It is described as follows.
The “ContainsPass” value changes as follows depending on the settings of the [Export Camera List] dialog box at the
time of saving.
Described only when the “ContainsPass” value for t he [Common Authentication Administrator name = Common
Authentication Administrator Password] is “1”...")
40 Camera specification files saved in CSV can be edited with a spreadsheet software such as Excel, or a text editor such as Notepad. Camera Specification File Configuration First line (header) It is described as follows. The “ContainsPass” value changes as follows depending on the settings of the [Export Camera List] dialog box at the time of saving. Described only when the “ContainsPass” value for t he [Common Authentication Administrator name = Common Authentication Administrator Password] is “1”...