Canon network camera VBM600VE User Manual

Intelligent Function Setting Tool
6-23
6
Admin Tools
Abandoned Object Detection
Detect objects that are carried in and abandoned for a certain amount of time. This function 
can be used to detect objects that have been left.
Abandoned object detection is triggered when an object is left in the detection area for a 
specified duration. 
Object abandoned.
Background Image 
Generated
Alert
Change in Designated Area Analysis Abandoned Object DetectedThe object is abandoned 
and detection begins 
after set...

6-24
Display Screen of Intelligent Function Setting Tool
(1) Image Display Area
The image currently captured by the camera is 
shown. Detection areas are shown in translucently 
colored frames (rectangular or polygonal). Drag to 
resize the frames. Also, subjects for which movement 
has been detected are shown with a contour line.
Pan, tilt, and zoom operations are the same as in the 
VB-M700/600/40 Viewer. For details, see “How to 
Operate the Viewer” (p. 7-6).
However, when the (10) [Lock camera...

Intelligent Function Setting Tool
6-25
6
Admin Tools
such as in the Admin Viewer, the control privileges will 
be obtained the moment the Intelligent Function 
Setting Tool is launched.
(6) [Focus]
Focus can be operated if the control privileges have 
been obtained. Focus operations are the same as in 
the Admin Viewer. For details, see “Setting the Focus” 
(p. 7-15). 
If the [Lock camera position] checkbox is selected, 
focus cannot be operated.
(7) [Smart Shade Control]
Smart shade control can be...

6-26
Flow of Intelligent Function Setting
The intelligent functions are set according to the 
procedure below. For details on the setting method, see 
each setting page. 
„Camera Position Settings 
For details on the preset setting method, see “Preset 
Setting Tool” (p. 6-16).
This selects [Lock camera position] in the Intelligent 
Function Setting Tool.
If [No] is clicked, select [Lock camera position].
„Intelligent Function Settings
When you click [Add] in the [Detection Setting List], 
the [New...

Intelligent Function Setting Tool
6-27
6
Admin Tools
Setting Intelligent Function Detection 
Settings
„Setting Detection Criteria ([Detection 
Criteria] tab)
Set detection criteria while operating the camera and 
checking the image in the image display area.
(1) [Detection Settings Name] 
You can use up to 64 characters in a detection setting 
name. Be sure to enter a single-byte alphanumeric 
detection setting name. 
In a [Detection Settings Name], ASCII characters 
(spaces or printable characters) can...

6-28
(4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)]
Set the lower limit for the size, change ratio, and 
judgment time for the set detection area to trigger 
detection. If the value set here is exceeded, “Detected” 
mode is triggered.
Click the text box to enter a value directly, or specify a 
value using the slider. 
For details on the setting method, see “Setting 
Detection Criteria per Detection Type” (p. 6-29).
„Setting Event Operations ([Event] tab) 
Set operations to be performed upon...

Intelligent Function Setting Tool
6-29
6
Admin Tools
Setting a [Polygonal] detection area
Specify polygonal areas with a maximum of 32 angles. 
Click in the image display area to form the polygon point 
by point. Click on a previously set point to complete the 
polygon and set the enclosed area as the detection area. 
The set area can also be moved by dragging it.
Note
 Drag the square marks (■) at each angle to change the shape 
of the polygon. 
 Click [Clear] to delete the polygonal detection area....

6-30
Detect criteria for [Removed Object Detection]
Set detection areas for objects whose removal you want to 
detect.
For [Duration (Sec)], set the time that must elapse after 
the object has been taken away. Detected mode will be 
triggered to ON when an object is taken away from the 
detection area for a period longer than the set [Duration 
(Sec)].
Any moving objects detected are shown with contour 
lines. As long as [Duration (Sec)] has not elapsed, 
contour lines are white. When [Duration (Sec)]...

6-31
6
Admin Tools
This tool lets you view the operating condition log of the camera. 
Display Screens of Log Viewer
(1) [Download] 
Download log files from this camera or SD memory 
cards.
(2) [Reload] 
Reload the displayed log file and show the latest logs.
(3) [Previous File] 
If there are multiple log files in the cameras internal 
memory or SD memory card, load and display the file 
before the currently shown log list.
(4) [Next File] 
If there are multiple log files in the internal memory or 
SD...

6-32
(13)[Date & Time]
Set the date and time of the log you want to show 
using the filter function. 
Select the [Specify start date & time] or [Specify end 
date & time] checkbox to set the date and time.
(14)[Apply filter] 
Show the filtered logs in the log display area.  
(15)[Search for]
Enter the character string for which you want to 
search. 
(16)[Match case] checkbox
Specify whether or not to enable case sensitivity in 
search commands. When selected, character strings 
perfectly matching the...