Canon network camera VBM600VE User Manual

View Restriction Setting Tool
6-13
6
Admin Tools
Display Screens of View Restriction Setting Tool
(1) Image Display Area
The image currently captured by the camera is shown. 
Pan, tilt, and zoom operations are the same as in the 
VB-M700/600/40 Viewer. For details, see “How to 
Operate the Viewer” (p. 7-6).
(2) [Switch Screen Size] button
Each time this button is clicked, the screen size of the 
image display area switches between “320 x 240” and 
“640 x 480”.
(3) [Switch Mouse Operation] button
Click...

6-14
 View restriction settings
[Upper  Limit]: Top limit of the view restriction. Click 
[Get value] to load the top edge 
value of the current camera angle.
[Lower Limit]: Bottom limit of the view restriction. 
Click [Get value] to load the bottom 
edge value of the current camera 
angle.
[Left Limit]: Left limit of the view restriction. Click 
[Get value] to load the left edge 
value of the current camera angle.
[Right Limit]: Right limit of the view restriction. 
Click [Get value] to load the right...

View Restriction Setting Tool
6-15
6
Admin Tools
Note
 Even when view restrictions are set, an area outside the view 
restriction may still appear momentarily when the camera is 
controlled near the boundary of the view restriction. 
 To cancel the view restrictions, clear the [Apply the view 
restriction] checkbox and then click [Save settings].
 If the setting fields are cleared while the [Apply the view 
restriction] checkbox is selected, the maximum view restriction 
will be set.
 The controllable...

6-16
A tool that lets you set presets and the home position. You can make the desired settings with the mouse by referring to the 
preview in the panorama mode. You can also set Preset Tour whereby the camera tours and monitors multiple presets. 
Preset Setting Tool
Set preset tour after the 
presets have been set. Preset Setting Tool
Important
If you want to use intelligent functions, it is strongly recommended that you use the Preset 
Setting Tool to register a preset that corresponds to the camera...

Preset Setting Tool
6-17
6
Admin Tools
Display Screens of Preset Setting Tool
Preset Setting Tool has two display screens, the [Preset] tab and the [Preset Tour] tab.
With the [Preset] tab, up to 20 presets and the home position are set while referring to the panorama screen. 
With the [Preset Tour] tab, Preset Tour is set whereby the camera tours and monitors multiple presets.
The following explains the [Preset] tab display screen.
For the [Preset Tour] tab, see “Preset Tour” (p. 6-20).
„[Preset] Tab...

6-18
(8) [Preset] tab, [Preset Tour] tab
Switch between the preset setting tab and preset tour 
setting tab.
(9) [Preset/Home Position] selection box
Select the preset (from 1 to 20) or [home position] you 
want to set.
(10)[Quick Registration] 
Load the current camera position, and register them 
as preset settings.
(11)[Preset Name]
You can enter a preset name of up to 64 characters. 
You can set a name in alphanumeric characters. Be 
sure to enter a single-byte alphanumeric preset name. 
When the...

Preset Setting Tool
6-19
6
Admin Tools
Setting the Preset
A preset and home position can be set in one of the 
following ways. 
„Setting from Camera Angle in the Image 
Display Area
„Use the preview frame of the panorama 
screen to set presets
Use the preview frame of the panorama screen to set 
presets. 
Be sure to enter the preset name. If you click on the panorama screen, the preview 
frame will move to center on the clicked point.
The settings are reflected in the image display area. 
If you...

6-20
The settings are reflected in the preview frame on the 
panorama screen and the image display area. 
If you previewed incorrect settings, etc., and want to 
restore the settings registered in the camera, click 
[Restore settings].
Note
 Up to 20 presets can be set. 
 Changes to preset settings are not reflected in already 
connected viewers.
 You can disable presets in the viewer by clearing the [Show in 
viewers] checkbox under [Detailed settings]. 
 Preset positions cannot be set in the digital...

Preset Setting Tool
6-21
6
Admin Tools
(8) [Speed (Z)] 
Select [Slow] or [Fast] for the camera speed during 
zoom. 
(9) [Pause (sec)] 
Set the time at which the camera stops at the preset 
position between 0 and 120 seconds in 5-second 
units. 
(10)[Add] 
Add the preset to the tour schedule list. 
(11)[Change] 
Change the speed or pause time between presets 
selected from the tour schedule list.
Note
 Preset tour is not performed while the camera is being 
controlled with viewers, Admin Tools, etc....

6-22
This tool is used to set intelligent functions that perform uploads, notify the viewer, audio playback, etc., if a change has 
occurred in the captured image due to movement of a subject. 
The intelligent functions can perform the following 5 types of detection. Use detection types that best serve your needs.
Intelligent Function Setting Tool
Admin Viewer
RM Viewer Camera
E-mail notification
Network
Video recording on storage server
Upload to FTP 
server/HTTP 
server Volume 
detection
Moving object...