Canon network camera VBM600VE User Manual

Creating a Camera Specification File
3-11
3
Camera Angle Setting Tool
„Entering in a Text Editor
Separate each field with a comma. When you save the file, use the .csv file extension. 
RegisterName,HostName,PortNumber,UserName,Password,ConnectType
B1F VB-M700F,192.168.100.1,80,root,camera1,0
1Fa VB-M600VE,192.168.100.2,80,root,camera2,0
1Fb VB-M600D,192.168.100.3,80,root,camera3,0
2Fa VB-M600D,192.168.100.4,80,root,camera4,0
2Fb VB-M600D,192.168.100.5,80,root,camera5,0
3Fa...

3-12 

Chapter 4
Top Page of the Camera
❏Accessing the Setting Page, Admin Tools and Viewer 

4-2
Accessing the Top Page of the Camera
From the top page of the camera, you can navigate to the 
Setting Menu to configure various camera settings, launch 
Admin Tools, and display the viewer to view images. 
The top page of the camera appears. 
(1) Language Button
Click to switch the display language. 
The top page language switches to the selected 
language. 
(2)Setting Page (Setting Menu) Link
Click to make detailed settings. See “Chapter 5 
Setting Page”. 
(3) Admin Tools Link
Click to use the...

Chapter 5
Setting Page
❏Administrator Password and Network Detailed Settings
❏Camera Date and Time Settings
❏Camera Name and Initial Camera Settings Related Settings
❏Image Size and Quality Settings
❏Upload and E-mail Notification Settings
❏Image Server, Audio Server and HTTP Server Settings
❏Settings Related to Events
❏User Registration/Authorities and Access Restriction Settings
❏IPsec Settings
❏HTTP Communication Encryption (SSL/TLS) Settings
❏SD Memory Card Operations and Displaying Information...

5-2
From the Setting Menu, you can navigate to each setting page to set various items regarding the camera. 
Information describing what can be set from each setting page is listed as follows. See each setting page for details. 

Administrator password, LAN, IPv4, IPv6, DNS and 
SNMP Settings (p. 5-5) 
 Date and Time
Camera date and time and time zone settings (p. 5-8) 
 Camera
Camera name, initial camera settings, day/night, 
external input device name and external output device 
name settings (p. 5-9)...

5-3
5
Setting Page
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page 
of the camera (p. 4-2).
For details on entering the user name and password, see p. 4-2. 
Setting Menu
(1) [Admin Viewer] 
Clicking this button opens Admin Viewer. 
(2) [Back to top] 
Clicking this button navigates to the top page. 
(3)Setting Menu
Clicking this button navigates to each setting page. 
Items Common to All Setting Pages
„Applying New Settings
When a...

5-4
„Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page 
to return to the Setting Menu. 
Note
Click on   [Help] at the beginning of any item to display a 
detailed explanation of that setting item. 
Important
 Do not open multiple setting pages at one time and try to 
change the settings of a single camera.
 Do not use the [Back] or [Forward] buttons in the web 
browser to navigate between setting pages. The changed 
settings may return to the original settings or...

5-5
5
Setting Page
Administrator Password
(1) [Password] 
Set the administrator password. Up to eight (single-
byte) ASCII characters (space or printable 
characters) can be used. The factory default setting is 
“camera”. If the Admin Viewer, Admin Tools, etc., are 
connected, terminate the connection before changing 
the password. 
(2) [Confirm Password] 
Enter the same password as above for confirmation. LAN
(1) [LAN Interface] 
Select [Auto], [Full Duplex] or [Half Duplex]. Normally 
[Auto] is used....

5-6
IPv6
(1) [IPv6] 
Set IPv6 use to [Disable] or [Enable]. 
(2) [Auto] 
Select [Enabled] to set the address automatically or 
[Disabled] not to set the address automatically. 
(3) [IPv6 Address (Manual)] 
Enter a fixed IPv6 address. 
(4) [Prefix Length] 
Enter a prefix length from 16 to 128 if [Disabled] is 
specified in (2). 
(5) [IPv6 Default Gateway Address] 
Enter a default gateway address if [Disabled] is 
specified in (2). Be sure to set when connecting the 
camera to a different subnet from that...