Home > Canon > Camera > Canon network camera VBR13 User Manual

Canon network camera VBR13 User Manual

Here you can view all the pages of manual Canon network camera VBR13 User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 41

Camera Setup
2
41
Adding the Camera’s IP Address to Trusted Sites
When the security level for internet sites and intranet sites is set to [High] in Internet Explorer, it is necessary to add the IP 
address of the camera to the list of trusted sites.
A confirmation message is displayed.
The camera will be added as a trus ted site for Internet Explorer.
Note
The added information will be loaded when Internet Explorer is re started. Close and restart Internet Explorer if it is running.
Checking the Video...

Page 42

42
The authentication screen for the Viewer is displayed (P. 53).
The web browser starts and the Camera Viewer is displayed.
Note
The web browser only starts when [Connectable] or [Connectable (error)] is displayed for [Connection Status].
Accessing the Camera from Web Browser
Cameras with the factory default settings are configured to obtain an IP address from the DHCP server. However, you can 
access a camera connected to a network env ironment without a response from the DHCP server by entering a...

Page 43

Camera Setup
2
43
The [Initial Settings] top page will be displayed.
After the camera reboots, the Setting Page is displayed and you can configure the settings.
1Launch the web browser.
2Enter 192.168.100.1, and press the Enter key.
3Enter the administrator name and administrator password, and click [Apply]. 

Page 44

44 

Page 45

Chapter
 
Setting the Camera Angle
After installing the camera, set the camera angle while checking the video displayed in [Camera] > [Camera 
Angle] on the Setting Page.
H651 

Page 46

46
Adjust the camera angle when installing the camera or after changing the installation location.
The camera angle settings are configured by accessing  the Setting Page (P. 88).
Step 1 Configuring the Camera Before Setting the Camera Angle
Set the digital zoom, image stabilizer, and  image flip, which affect the camera angle.
[Digital Zoom] (P. 108) and [Image Stabilizer] (P. 108) in [C amera] > [Camera] > [Camera Control] on the Setting Page. 
[Image Flip] (P. 111) in [Camera] > [Camera]  >...

Page 47

Setting the Camera Angle
3
47
Select [Camera] > [Camera Angle] on the Setting Page to set pan, tilt, zoom, rotation and focus.
Note
[Camera Angle] can be also launched from the Camera Management Tool. For details, please refer to “Camera Management Tool User 
Manual”.
Camera Angle Screen Composition
(1) Video Display Area
Camera video is  displayed here.
(2) Control Assist Display Displays the available directions for the camera with  dotted lines when performing pan/tilt operations.
(3) [Pan] Buttons...

Page 48

48
(9) Control Assist CorrectionIf you click [Exec] when the control assistance display  does not match the actual camera angle, an operation is 
performed which confirms the actual camera angle, and  the position of the control assistance display is 
automatically corrected.
Correction takes approximately one minute.
(10) [Camera Settings] Operate the focus.
(11) Digital Zoom Range Displayed when [Digital Zoom] is set to [Enable] in [Camera] > [Camera] > [Camera Control] on the Setting 
Page.
(12)...

Page 49

Setting the Camera Angle
3
49
To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an 
angle where the subject in the video is horizontal.
 Setting Camera Angle by Clicking Video
If you click anywhere in the video display area, the camera angle will change to center on that location.
If you click outside the pan or tilt r ange, however, the camera angle will only  change for the one which is within its 
range.
Note
If the camera moves...

Page 50

50
[Focus]
Selects the focus.[Auto]
Automatically adjusts the focus.
[Manual]
You can click and hold the [Near] and [Far] buttons in [Adjust  Focus] to adjust the focus in the near and far directions.
When you click [Exec] in [One-shot AF],  the camera will focus once using autofocus and then switch to manual mode.
[Fixed at infinity]
You can set the focus so that it is fixed near infinity.
Note
If you click [Apply] to apply changed camera angle settings, the  zoom and focus settings are also reflected...
Start reading Canon network camera VBR13 User Manual

Related Manuals for Canon network camera VBR13 User Manual

All Canon manuals