Canon printer imageCLASS D1150 User Manual

							Fax (D1180/D1170/D1150) 
6-30
Selecting Image Quality
Selecting Image Quality
You can adjust the image quality of the document you send. The higher image quality you 
set, the better the output will be, but the longer the transmission will take. The default 
setting is .
1 
Place documents.
2 
Press  [SEND/FAX]/ [FAX].
3 
Press  [SEND/FAX] repeatedly to 
select , then press [OK].
S E L E C T : O K F A X
 For the D1150, skip this step.
4 
Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19.
5 
Press  [Image Quality] repeatedly to 
select the image quality, then press [OK].
F I N E
: for fine-print documents (the 
resolution is twice that of ) (200 
× 200
  dpi)
: for documents that contain 
photographs (the resolution is twice that of 
) (200 × 200 dpi)
: for documents that contain 
fine print and images (the resolution is four 
times that of ) (200 × 400 dpi)
: for documents that contain 
fine print and images (the resolution is eight 
times that of ). (400 × 400 dpi)
: for most text-only documents 
(200 × 100
  dpi)
This setting returns to the default after all 
documents are scanned. If you want to keep 
the setting, see “Standard Send Settings,” on 
p

.  6-35.
6 
Press  [Start].
When you place the documents on the platen 
glass, press 
 or  to select the document 
size, then press 
 [Start] for each document. 
When scanning is complete, press [OK] to start 
sending. –
–
–
–
–
– 
						

							Fax (D1180/D1170/D1150) 
6-31
2-Sided Documents
2-Sided Documents
You can set the machine to automatically turn over 2-sided documents that are placed in the 
ADF, and scan each side separately.
1 
Place documents in the ADF.
2 
Press  [SEND/FAX]/ [FAX].
3 
Press  [SEND/FAX] repeatedly to 
select , then press [OK].
S E L E C T : O K F A X
For the D1150, skip this step.
4 
Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19.
5 
Press  [2-Sided] repeatedly to select the 
binding type, then press [OK].
B O O K   T Y P E 2 - S I D E D
: The front and back sides of the 
document have the same top-bottom 
orientation.
: The front and back sides 
of the document have opposite top-bottom 
orientations.
: The machine does not automatically 
scan both sides of the document.
6 
Press  [Start].
When you place the documents on the platen 
glass, press 
 or  to select the document 
size, then press 
 [Start] for each document. 
When scanning is complete, press [OK] to start 
sending. –
–
– 
						

							Fax (D1180/D1170/D1150) 
6-32
Sending Documents at a Preset Time (Delayed Sending)
Sending Documents at a Preset Time 
(Delayed Sending)
Delayed sending enables you to start transmission at a specified time. You can store up to 
70 delayed sending jobs. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  1 . D E L A Y E D   S E N D T X / R X   S E T T I N G S
4 
Press  or  to select , then 
press [OK].
                                    O N D E L A Y E D   S E N D
5 
Use   –  [numeric keys] to enter the 
time you want to start sending, then 
press [OK].
2 0 : 0 0 T X   T I M E   S E T T I N G
Ex.
Enter the time in 24-hour/military time format.
Enter all numbers, including zeros.
–
–
6 
Press  [Stop/Reset] to return to the 
standby mode.
7 
Place documents.
8 
Press  [SEND/FAX]/ [FAX].
9 
Press   [SEND/FAX] repeatedly to 
select , then press [OK].
S E L E C T : O K F A X
For the D1150, skip this step. 
						

							Fax (D1180/D1170/D1150) 
6-33
Sending Documents at a Preset Time (Delayed Sending)
10
 Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19.
If  in  in 
 is set to  and you 
specify a fax number using 
 – ,  [numeric 
keys] and  [ Tone], you must enter the fax 
number again for confirmation. Enter the same fax 
number you entered in step 10, then press [OK].
11
  Press  [Start].
The document is scanned and stored into 
memory. It will be sent to the specified 
destination at the specified time.
When you place the documents on the platen 
glass, press 
 or  to select the document 
size, then press 
 [Start] for each document. 
When scanning is complete, press [OK] to start 
sending.
When  is set to  in  in  in , and if you have specified the 
destination by any other method than using 
  – ,  [numeric keys] and  [ Tone], the 
machine starts scanning automatically without 
pressing 
 [Start], after the preset time for this 
setting is elapsed. (See “ Time Out Mode,” on 
p
. 6-41.)
If the document cannot be sent at the time 
specified for delayed sending due to a 
temporary power failure (that recovers within 
an hour), it will be sent at the specified time on 
the next day.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-34
Changing Density Level
Changing Density Level
This setting enables you to preset the standard density level on a nine-step scale. The 
default setting is  on a scale of 1 to 9. The level you define here applies when you select 
the “standard” level (in the middle of the scale) using 
 [Density] on the operation panel.
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  1 . T X   S E T T I N G S T X / R X   C O M M O N   S E T .  
5 
Press  or  to select , then press [OK].
  4 . S C A N N I N G   D E N S I T Y   T X   S E T T I N G S
6 
Press  or  to adjust the density, 
then press [OK].
- L T                             D K + S C A N N I N G   D E N S I T Y  
: to make light documents darker
: to make documents lighter
7 
Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-35
Standard Send Settings
Standard Send Settings
This mode enables you to specify the standard scan settings for density and resolution.
Storing the Standard Send Settings
You can change and store the Standard Send 
Settings. The default settings are as follows:: 
: 
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  1 . T X   S E T T I N G S T X / R X   C O M M O N   S E T .
5 
Press  or  to select , then press [OK].
  5 . S T A N D A R D   S E T T I N G S T X   S E T T I N G S
–
–
6 
Press  or  to select the desired 
setting item, then press [OK].
  1 . D E N S I T Y S T A N D A R D   S E T T I N G S
You can specify the following settings: : Adjusts the density of 
documents. (See “Adjusting Density,
” on p. 6-
29.)
: Adjusts the image quality of 
documents. (See “Selecting Image Quality,” on 
p

.  6-30.)
7 
Each time you set the desired setting 
item, press [OK].
                        S T A N D A R D D E N S I T Y
8 
Press  [Stop/Reset] to return to the 
standby mode.
Restoring the Standard Send 
Settings to Their Default
You can restore the Standard Send Settings to their 
original default settings.
1 
Press  [Menu].
–
– 
						

							Fax (D1180/D1170/D1150) 
6-36
Standard Send Settings
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  1 . T X   S E T T I N G S T X / R X   C O M M O N   S E T .
5 
Press  or  to select , then press [OK].
1 0 . I N I T   S T A N D A R D   S E T T X   S E T T I N G S
6 
Press  to select .
<   Y E S                       N O   > O K   T O   I N I T I A L I Z E ?
To cancel restoring the Standard Send Settings, 
press 
 to select .
7 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Fax (D1180/D1170/D1150) 
6-37
Printing the TX Terminal ID
Printing the TX Terminal ID
The TX Terminal ID setting enables you to specify the details included in the Terminal ID 
information printed on faxed documents. Information such as your fax number and name 
can be included to let the recipient know who sent the document. You can set the position of 
the Terminal ID information on the paper. The default settings are as follows:: 
: 
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S .
4 
Press  or  to select , 
then press [OK].
  1 . T X   S E T T I N G S T X / R X   C O M M O N   S E T .
5 
Press  or  to select , then press [OK].
  7 . T X   T E R M I N A L   I D T X   S E T T I N G S
6 
Press  or  to select , then press [OK].
  1 . P R I N T I N G   P O S I T I O N T X   T E R M I N A L   I D
7 
Press  or  to select  or , then press 
[OK].
              O U T S I D E   I M A G E P R I N T I N G   P O S I T I O N
: The Terminal ID information 
is printed inside the image area on the 
recipient’s paper.
: The Terminal ID 
information is printed outside the image area 
on the recipient’s paper.
8 
Press  or  to select , then press [OK].
  2 . T E L E P H O N E   #   M A R K T X   T E R M I N A L   I D
–
– 
						

							Fax (D1180/D1170/D1150) 
6-38
Printing the TX Terminal ID
9 
Press  or  to select  or 
, then press [OK].
                                  F A X T E L E P H O N E   #   M A R K
: “ TEL” is printed before the fax/
telephone number.
: “FAX” is printed before the fax/
telephone number.
10
  Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-39
ECM Transmission
ECM Transmission
ECM (Error Correction Mode) reduces the effect of system and line errors on documents that 
occur during sending or receiving with another fax machine that supports ECM. If the other 
machine does not support ECM, this setting is ignored. If transmission speed appears to be 
extremely slow, you may be able to speed up transmission time by turning ECM off. The 
default setting is .
If you want to transmit using ECM, it is necessary that ECM Transmission be set in both the destination machine and this 
machine. This function does not operate unless ECM is set in both machines.
Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.
If there is trouble with the line, it will take more time to send the documents.
–
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  3 . T X   S E T T I N G S F A X   S E T T I N G S  
5 
Press  or  to select , then 
press [OK].
  1 . E C M   T X T X   S E T T I N G S
6 
Press ,  to select  or , 
then press [OK].
                                    O N E C M   T X
: The ECM transmission is not activated.
: The ECM transmission is activated.
7 
Press  [Stop/Reset] to return to the 
standby mode.
–
–