Canon printer imageCLASS D1150 User Manual

							Copying 
3-14
Adjusting Density
Adjusting Density
You can adjust the density to the most appropriate level for the document either 
automatically or manually. The default setting is  (5).
Adjusting Automatically
You can adjust the density to the most appropriate 
level for the document automatically.
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [Density] repeatedly to select 
, then press [OK].
    A U T O   D E N S I T Y D E N S I T Y
The image quality is automatically set to .
4 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T 1 0 0 %                 L T R0 1    A  
5 
Press   [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. 
						

							Copying 
3-15
Adjusting Density
Adjusting Manually
You can adjust the density to the most appropriate 
level for the document manually.
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [Density] repeatedly to select the 
manual mode.
4 
Press  or  to adjust the copy 
density, then press [OK].
- L T                             D K + D E N S I T Y  
: to make light documents darker
: to make dark documents lighter
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [SEND/FAX]/ [FAX], all settings will be also canceled. If 
you want to keep the settings, set the density as 
follows:  
 [Menu] →  →  →  →  (See 
“COPY SETTINGS,
” on p. 13-5.)
–
–
5 
Use  
–  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %                 L T R0 1
6 
Press   [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. 
						

							Copying 
3-16
Enlarge/Reduce Images
Enlarge/Reduce Images
You can convert a standard-sized document to a different standard-sized copy (preset 
zoom), or you can enlarge or reduce images in 1% increments (custom copy ratio). The 
default setting is .
Preset Zoom
You can enlarge or reduce standard size documents 
to another standard paper size.
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [Enlarge/Reduce].
  -             1 0 0 %             + P R E S E T   R A T I O 
						

							Copying 
3-17
Enlarge/Reduce Images
4 
Press  or  to select the copy ratio, 
then press [OK].
    7 8 %   L G L           L T R P R E S E T   R A T I O






When  in the  menu is set to  or , the 
preset copy ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 
141%, 200%
5 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O   7 8 %                 L T R0 1
6 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page.
Custom Copy Ratio
You can enlarge or reduce images by any copy ratio, 
in 1% increments. The available copy ratios are from 
50% to 200%.
–
–
–
–
–
–
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [Enlarge/Reduce] twice.
  -             1 0 0 %             + Z O O M     5 0 - 2 0 0 %
4 
Use  –  [numeric keys] to enter the 
copy ratio, then press [OK].
  -               9 5 %             + Z O O M     5 0 - 2 0 0 %
You can also use  or  to adjust the copy 
ratio. To increase the copy ratio, press 
. To 
decrease the copy ratio, press 
.
To return the copy ratio to 100%, press  [Enlarge/Reduce] repeatedly to display 
, then press [OK]. 
						

							Copying 
3-18
Enlarge/Reduce Images
5 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O   9 5 %                 L T R0 1
6 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. 
						

							Copying 
3-19
Collating Copies
Collating Copies
You can sort copies into sets arranged in page order. This function is useful when making 
handouts for meetings. This feature can be used together with both “2-Sided Copying” (see 
p

.  3-24) and “Multiple Documents onto One Sheet (2 on 1)”
 (see p. 3-21). The default setting 
is .
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
If  is set to  in  in , skip to step 4. 
						

							Copying 
3-20
Collating Copies
3 
Press  [Collate/2 on 1] repeatedly to 
select , then press [OK].
C O L L A T E
If you want to use  and “2 on 1 
Combination”
 (see p. 3-21) at the same time, 
select , then press [OK].
If you want to use  and the 2-
sided copying at the same time, go to step 3 
of “1 to 2-Sided Copying”
 (see p. 3-25), “2 to 2-
Sided Copying”
 (see p. 3-26), or “2 to 1-Sided 
Copying”
 (see p. 3-27).
4 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %   *             L T R0 1
5 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK]. The machine prints the 
remaining sets of copies.
To cancel all settings, press  [Stop/Reset].
When you switch the mode by pressing the 
mode keys such as 
 [SEND/FAX]/ [FAX], all settings will be also canceled. If 
you want to keep the settings, set the collate 
mode as follows:  
 [Menu] →  →  →  →  (See “COPY 
SETTINGS,
” on p. 13-5.)”
When scanning multiple page documents, 
 may appear in the display 
and scanning may be canceled. If this happens, 
press [OK] to return to the standby mode, and 
print, send, or delete any documents stored in 
memory.
–
–
–
–
– 
						

							Copying 
3-21
Multiple Documents onto One Sheet (2 on 1)
Multiple Documents onto One Sheet (2 on 1)
This mode enables you to reduce two-page documents to fit on one sheet of paper (1-sided/
2-sided).
2 on 1 Combination
2 on 1 mode automatically reduces two documents 
to fit on the selected paper size. You can make well-
organized copies by copying multiple documents 
onto one sheet. This mode enables you to cut print 
costs by saving copy papers, and it is also useful for 
saving space. This feature can be used together with 
both ”Collating Copies”
 (see p. 3-19) and ”2-Sided 
Copying”
 (see p. 3-24). The default setting is .
The reduction ratio is automatically set so that the documents fit 
onto the selected paper size.
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4. 
						

							Copying 
3-22
Multiple Documents onto One Sheet (2 on 1)
2 
Press  [COPY ].
3 
Press  [Collate/2 on 1] repeatedly to 
select , then press [OK].
2   O N   1
If you want to use  and “Collating 
Copies”
 (see p. 3-19) at the same time, select 
, then press [OK].
If you want to use  and the 2-sided 
copying at the same time, go to step 3 of “1 to 
2-Sided Copying”
 (see p. 3-25), “2 to 2-Sided 
Copying”
 (see p. 3-26), or “2 to 1-Sided 
Copying”
 (see p. 3-27).
4 
Use   –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O   6 4 %   *             L T R0 1
5 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page. When scanning is 
complete, press [OK].
To cancel all settings, press  [Stop/Reset].
A maximum of 1/8" (4 mm) margin will be 
produced between the two reduced 
documents in 2 on 1 copying.
–
–
–
–
Copying ID Card
You can make copies of a card printed on both sides 
like an ID card. The printed images on the front-
back both sides of a paper are placed on exactly the 
same position like the original card.
You must place a document on the platen glass when using 
this function.
The zoom ratio will automatically be set to  with this 
feature. You cannot change the copy size.
The ID card copy function can be used for LTR size paper if 
you select  in  in , and for A4 if you select  or .
When you select the ID card copy, the other copy settings you 
made, such as the copy ratio and paper size, will be canceled 
automatically.
This function cannot be used with the 2 on 1 mode, the 
collating mode, or the 2-sided copying mode.
1 
Place a card on the platen glass.
Place a card as indicated below.
Align the center of a card with the arrow 
mark.
2 
Press  [COPY ].
3 
Press  [Collate/2 on 1] repeatedly to 
select , then press [OK].
I D   C A R D   C O P Y
–
–
–
–
–
–
– 
						

							Copying 
3-23
Multiple Documents onto One Sheet (2 on 1)
4 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %   *             L T R0 1
5 
Press  [Start].
6 
Turn and place the card.
S C A N                     : S T A R T T U R N   O V E R   I D   C A R D
Place the card as indicated below.
Align the center of a card with the arrow 
mark.
7 
Press  [Start].
To cancel all settings, press  [Stop/Reset]
–
–