Home > Canon > Printer > Canon printer PIXMA MG2920 User Manual

Canon printer PIXMA MG2920 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG2920 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 735
    							Print Results Not SatisfactoryIf the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the
    paper and print quality settings first.
    Check1  Do the page size and media type settings match the size and type of the loaded
    paper?
    When these settings are incorrect, you cannot obtain a proper print result. If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the
    printout color.
    Also, if you print with an incorrect paper type setting, the printed surface may be scratched.
    The method of confirming the paper and print quality settings differs depending on what you do with your
    machine.
    To print from a PictBridge (Wireless LAN)
    compliant deviceConfirm by using your PictBridge (Wireless LAN) compliant device.
    About PictBridge (Wireless LAN) Print Settings
    To print from a computerConfirm by using the printer driver.
    Printing with Easy Setup
    Check2  Make sure that the appropriate print quality is selected referring to the table in
    Check 1.
    Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven colors,
    increase the print quality setting and try printing again.
    You can confirm the print quality setting using the printer driver.
    Changing the Print Quality and Correcting Image Data
    Check3  If the problem is not resolved, there may be other causes.
    See also the sections below:
    Cannot Print to End of Job
    No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
    Colors Are Unclear
    Lines Are Misaligned
    Line Does Not Print or Prints Partially
    Image Does Not Print or Prints Partially
    Printed Paper Curls or Has Ink Blots
    Paper Is Smudged/Printed Surface Is Scratched
    Back of the Paper Is Smudged
    Colors Are Uneven or Streaked
    If the Printed Paper Has Been DiscoloredColors may fade with time if the printed paper is left for a long period of time.
    611 
    						
    							After printing, dry the paper sufficiently, avoid high temperatures, high humidity, and direct sunlight, andstore or display indoors at room temperature and normal humidity.
    To avoid direct exposure to air, it is recommended that you store the paper in an album, plastic folder,
    photo frame, etc.
    612 
    						
    							Cannot Print to End of Job
    Check1 Select the setting not to compress the printing data.
    If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved.
    Click  Print Options  on the Page Setup  sheet on the printer driver. Select the  Do not allow application
    software to compress print data  check box, then click OK.
    * Deselect the check box after printing is complete.
    Check2  Is the size of the print data extremely large?
    Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
    the displayed dialog to  On.
    * When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
    Check3
     Is the space of your computer's hard disk sufficient?
    Delete unnecessary files to free disk space.
    613 
    						
    							No Printing Results/Printing Is Blurred/Colors Are Wrong/White
    Streaks
     No Printing Results
     Printing Is Blurred
     Colors Are Wrong
     White Streaks
    Watch the movie
    614 
    						
    							Check1 Did you confirm the paper and print quality settings?
    Print Results Not Satisfactory
    Check2 Print the Nozzle Check Pattern and perform any necessary maintenance
    operations such as Print Head Cleaning.
    Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.Refer to 
    When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
    Cleaning, and Print Head Deep Cleaning.
    •
    If the Nozzle Check Pattern is not printed correctly:
    After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern.
    •
    If the problem is not resolved after performing the Print Head Cleaning twice:
    Perform the Print Head Deep Cleaning.
    If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and
    perform another Print Head Deep Cleaning after 24 hours.
    •
    If the problem is not resolved after performing the Print Head Deep Cleaning twice:
    Ink may have run out. Replace the FINE cartridge.
    Check3  When a FINE cartridge runs out of ink, replace it with a new one.
    Check4 When using paper with one printable surface, make sure that the paper is
    loaded with the printable side facing up.
    Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality. Load paper with the printable side facing up.
    Refer to the instruction manual supplied with the paper for detailed information on the printable side.
    Check5  Is the FINE cartridge installed properly?
    If the FINE cartridge is not installed securely, ink may not be ejected correctly.
    Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges. Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
    After confirming that the FINE cartridge is installed properly, close the cover.
    •
    When copying, see also the sections below:
    Check6  Is the platen glass dirty?
    Clean the platen glass.
    615 
    						
    							Cleaning the Platen Glass and Document Cover
    Check7 Make sure that the original is properly loaded on the platen glass.
    Loading Originals
    Check8
     Is the original loaded with the side to be copied facing down on the platen
    glass?
    Check9  Did you copy a printout done by this machine?
    If you use a printout done by this machine as the original, print quality may be reduced depending on the
    condition of the original.
    Reprint from the computer if you can reprint from it.
    616 
    						
    							Colors Are Unclear
    Watch the movie
    Check1 Is the Nozzle Check Pattern printed properly?
    Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to 
    When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
    Cleaning, and Print Head Deep Cleaning.
    •
    If the Nozzle Check Pattern is not printed correctly:
    After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern.
    •
    If the problem is not resolved after performing the Print Head Cleaning twice:
    Perform the Print Head Deep Cleaning.
    If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and
    perform another Print Head Deep Cleaning after 24 hours.
    •
    If the problem is not resolved after performing the Print Head Deep Cleaning twice:
    Ink may have run out. Replace the FINE cartridge.
    Check2  When a FINE cartridge runs out of ink, replace it with a new one.
    Check3 Is the FINE cartridge installed properly?
    If the FINE cartridge is not installed securely, ink may not be ejected correctly. Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.
    Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
    After confirming that the FINE cartridge is installed properly, close the cover.
    Note
    •
    Printed colors may not match screen colors due to basic differences in the methods used to produce colors. Color control settings and environmental differences can also affect how colors appear on the
    screen. Therefore, colors of printing results may be different from those on the screen.
    617 
    						
    							Lines Are Misaligned
    Check1 Did you confirm the paper and print quality settings?
    Print Results Not Satisfactory
    Check2 Perform Print Head Alignment.
    If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
    Aligning the Print Head
    Note
    •
    If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment
    manually referring to 
    Aligning the Print Head Position from Your Computer .
    Check3
     Increase the print quality and try printing again.
    Increasing the print quality in the printer driver may improve the print result.
    618 
    						
    							Line Does Not Print or Prints Partially
    Check1 Is the Page Layout Printing performed or the Binding margin function used?
    When the Page Layout Printing or Binding margin function is being used, thin lines may not be printed. Try
    thickening the lines in the document.
    Check2  Is the size of the print data extremely large?
    Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
    the displayed dialog to  On.
    * When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
    619 
    						
    							Image Does Not Print or Prints Partially
    Check1 Select the setting not to compress the printing data.
    If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved.
    Click  Print Options  on the Page Setup  sheet on the printer driver. Select the  Do not allow application
    software to compress print data  check box, then click OK.
    * Deselect the check box after printing is complete.
    Check2  Is the size of the print data extremely large?
    Click  Print Options  on the Page Setup  sheet on the printer driver. Then, set  Prevention of Print Data Loss in
    the displayed dialog to  On.
    * When  On is selected for  Prevention of Print Data Loss , print quality may be reduced.
    620 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG2920 User Manual