Canon printer PIXMA MG6821 User Manual

							Registering a Frequently Used Printing ProfileYou can register the frequently used printing profile to  Commonly Used Settings on the Quick Setup  tab.
Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a Printing Profile1.
Open the printer driver setup window
2.
Set the necessary items
From  Commonly Used Settings  on the Quick Setup  tab, select the printing profile to be used and if
necessary, change the settings after  Additional Features.
You can also register necessary items on the  Main and Page Setup  tabs.
3.
Click Save...
The Save Commonly Used Settings  dialog box opens.
4.
Save the settings
Enter a name in the  Name field. If necessary, click  Options..., set the items, and then click  OK.
In the  Save Commonly Used Settings  dialog box, click OK to save the print settings and return to the
Quick Setup  tab.
The name and icon are displayed in  Commonly Used Settings.
251 
						

							Important
						

							Managing the Printer PowerThis function allows you to manage the printer power from the printer driver.
The procedure for managing the printer power is as follows:
 Power Off
The  Power Off  function turns off the printer. When you use this function, you will not be able to turn the
printer on from the printer driver.
1.
Open the printer driver setup window
2.
Execute power off
Click  Power Off  on the Maintenance  tab. When the confirmation message appears, click  OK.
The printer power switches off, and the  Maintenance tab is displayed again.
 Auto Power
Auto Power  allows you to set  Auto Power On and Auto Power Off .
The  Auto Power On  function automatically turns on the printer when data is received.
The  Auto Power Off  function automatically turns off the printer when there are no operations from the
printer driver or the printer for a specified period of time.
1.
Open the printer driver setup window
2.
Make sure that the printer is on and then click  Auto Power on the Maintenance  tab
The  Auto Power Settings  dialog box opens.
Note

						

							The setting is enabled after this. When you want to disable this function, select Disable from the list
according to the same procedure.
Note

						

							Reducing the Printer NoiseThe silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
 Quiet Settings
1.
Open the printer driver setup window
2.
Click  Quiet Settings  on the Maintenance  tab
The  Quiet Settings  dialog box opens.
Note

						

							Note
						

							Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation.
The procedure for configuring  Custom Settings is as follows:
 Custom Settings
1.
Open the printer driver setup window
2.
Make sure that the printer is on, and then click  Custom Settings on the Maintenance
tab
The  Custom Settings  dialog box opens.
Note

						

							Don't detect mismatch of paper settings when printing from computerWhen you print documents from your computer and the paper settings on the printer driver and
the cassette paper information registered on the printer do not match, this setting disables the
message display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.4.
Apply the settings
Click  OK and when the confirmation message appears, click  OK.
The printer operates with the modified settings hereafter.
258 
						

							Changing Settings from Operation Panel
Changing Settings from Operation Panel
Print settings
LAN settings
Device user settings
PictBridge print settings
Language selection
Home screen background color
Firmware update
Cassette settings
Reset setting
ECO settings
Quiet setting
259 
						

							Changing Settings from Operation PanelThis section describes the procedure to change the settings in the  Device settings screen, taking the steps
to specify  Extended copy amount  as an example.1.
Make sure machine is turned on.
2.
Flick HOME screen and tap  Setup .
Using the Operation Panel
3.
Tap  Device settings .
The  Device settings  screen is displayed.
4.
Tap setting item to adjust.
The setting screen for the selected item is displayed.
5.
Tap setting item.
6.
Tap setting to specify.
260