Canon scanner imageFORMULA ScanFront 300 User Manual

iii
❏Manuals for the Scanner
The following manuals are provided with the Canon 
ScanFront 300/300P/330. Be sure to read these manuals 
thoroughly before using the scanner. 
Setup and Operation Guide*
Setup Guide
Describes the procedure for setting up the scanner for 
scanning. Set up the ScanFront in accordance with the 
Setup Guide. For details on the ScanFront, refer to the 
Operation Guide and ScanFront 300/300P/330 
INSTRUCTIONS (electronic manuals). 
Operation Guide
Provides an overview of the...

iv
❏How This Manual is Organized
This manual consists of the following chapters. 
Chapter 1   Before Use
This chapter provides an overview of the ScanFront. 
Chapter 2   Handling
This chapter describes the types of documents that can be 
scanned, and the basic operations of the scanner. 
Chapter 3   ScanFront Setup
This chapter describes the setup procedures and 
Administrator Settings of the scanner. 
Chapter 4   ScanFront Service
This chapter describes the how to use and configure 
ScanFront Service....

v ❏Table of Contents
Introduction............................................................... i
Manuals for the Scanner ......................................... iii
Symbols Used in This Manual ................................. iii
How This Manual is Organized................................ iv
Chapter 1   Before Use
1. Important Safety Instructions............................ 1-2
Installation Location .............................................. 1-2
Power...

vi
3. ScanFront Service Setup ................................. 4-6
ScanFront Settings ............................................... 4-6
Changing the Port Number Used for 
Communication..................................................... 4-6
Chapter 5   Operating Procedures
1. Flow of Scanner Operations ............................. 5-2
2. Turning the Power ON and OFF ...................... 5-3
Turning the Power ON .......................................... 5-3
Turning the Power OFF...

vii
8. System Settings ............................................. 6-39
Backup and Restore ........................................... 6-40
Module Version Information/Update ................... 6-41
Log Settings........................................................ 6-42
Screenshot ......................................................... 6-43
Chapter 7   ScanFront Administration Tool
1. About ScanFront Administration Tool ............... 7-2
2. Installing ScanFront Administration Tool .......... 7-3...

Chapter 1   Before Use
1. Important Safety Instructions ........................... 1-2
Installation Location ..............................................1-2
Power ....................................................................1-2
Moving the Scanner ..............................................1-3
Handling ................................................................1-3
About the Fingerprint Sensor 
(ScanFront 300P only) ..........................................1-5
Disposal...

1-2
Chapter 1   Before Use
1.Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.
❏Installation Location
The performance of this scanner is affected by the 
environment in which it is installed. Make sure that the 
location where the scanner is installed meets the following 
environmental requirements.
●Provide adequate space around the scanner for 
operation, maintenance, and ventilation.
●Avoid installing the...

1-3
Chapter 1   Before Use
●Do not pull directly on the power cord. When 
disconnecting the power cord, grasp the plug and 
remove it from the outlet.
●Keep the area around the power plug clear of 
objects so that the power cord can be 
disconnected easily in an emergency.
●Use only the AC adapter provided with this 
scanner. Also, do not use the AC adapter provided 
with the scanner with any other electrical devices.
Model: MG1-4558
●If you have any questions regarding the power 
supply, contact your...

1-4
Chapter 1   Before Use
■If the scanner makes strange noises, or gives off, 
smoke, heat, or strange odors, or the scanner 
does not function or other abnormalities occur 
when you use the machine, immediately turn the 
power OFF, and disconnect the power plug from 
the power outlet. Then, contact your local 
authorized Canon dealer or service representative 
for further information.
■Do not drop the scanner, or subject it to impact or 
strong shock. Should the scanner ever become 
damaged,...

1-5
Chapter 1   Before Use
❏About the Fingerprint Sensor 
(ScanFront 300P only)
●The following actions may damage the sensor or 
cause it to malfunction:
– Dropping an object on the fingerprint sensor, or 
otherwise subjecting it to a strong impact
– Scratching the surface of the fingerprint sensor, 
or poking it with a pointed object
– Pressing a hard object such as a fingernail or 
metal item against the fingerprint sensor
– Touching the fingerprint sensor with dirty hands
– Placing a sticker on the...