Home > Casio > Digital Camera > Casio Exilim EX V8 User Manual

Casio Exilim EX V8 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Casio Exilim EX V8 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							181EDITING IMAGES
    6.Press [SET].
    7.Use [W] and [X] to select the snapshot for the 
    layout and then press [SET].
    8.Repeat steps 6 and 7 for all of the other frames 
    in the layout.
    The final layout image will be saved after you insert the final 
    snapshot into it.
    •Pressing [MENU] returns to the PLAY mode screen 
    without saving the layout image.
    •You will not be able to save the new image unless there is 
    a snapshot in all of the layout frames.
    IMPORTANT!
    •Layout Print is not supported when the image size is “3:2 
    (3264 × 2176 pixels)”.
    •When you display a layout image on the camera’s monitor 
    screen, the date and time indicates when the last image 
    added to the layout was originally recorded, not when the 
    image was laid out.
    •The size of the multi-snapshot image for this operation is 
    fixed automatically at 7M (3072 × 2304 pixels).
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							182EDITING IMAGES
    You can use the white balance setting to select a light source 
    type for a recorded image, which will affect the colors of the 
    image.
    1.In the PLAY mode, use [W] and [X] to display 
    the image whose white balance setting you 
    want to change.
    2.Press [MENU].
    3.Select the “PLAY” tab, select “White Balance”, 
    and then press [X].
    •Note that the above step is possible only when there is a 
    snapshot displayed on the monitor screen.
    4.Use [S] and [T] to select a white balance 
    setting, and then press [SET] to apply it.Adjusting White Balance of a 
    Recorded Image
    When you want the image to appear 
    like it was recorded under these 
    conditions:Select this 
    setting:
    Outdoors, fair weather  (Daylight)
    Outdoors, cloudy to rain, in tree shade, 
    etc. (Overcast)
    In a location where color temperature is 
    very high, like in the shade of a building, 
    etc. (Shade)
    Under white or daylight white 
    fluorescent lighting, without suppressing 
    color cast (Day 
    White 
    Fluorescent)
    Under daylight fluorescent lighting, 
    while suppressing color cast (Daylight 
    Fluorescent)
    Under incandescent lighting, while 
    suppressing color cast (Tungsten)
    Cancel white balance adjustment Cancel
    N
    D
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							183EDITING IMAGES
    •Normally, the initially selected white balance setting on 
    the above menu is the one that was used when you 
    originally recorded the image. If you used the “Auto” or 
    “Manual” white balance setting when you recorded the 
    image, “Cancel” will be selected (page 139).
    •If you select the same white balance setting as the one 
    you selected when you originally recorded the image, 
    pressing [SET] will exit the white balance adjustment 
    menu without changing the image.
    IMPORTANT!
    •Adjusting the white balance of an image creates a new 
    image with the new white balance setting. The original 
    image also remains in memory.
    •When you display an image whose white balance has been 
    adjusted on the camera’s monitor screen, the date and time 
    indicates when the image was originally recorded, not 
    when the white balance was adjusted.Use the following procedure to adjust the brightness of 
    snapshots.
    1.In the PLAY mode, use [W] and [X] to scroll 
    through images and display the one whose 
    brightness you want to adjust.
    2.Press [MENU].
    3.Select the “PLAY” tab, select “Brightness”, 
    and then press [X].
    •Note that the above step is possible only when there is a 
    snapshot displayed on the monitor screen.
    Adjusting Image Brightness
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							184EDITING IMAGES
    4.Use [S] and [T] to select the setting you want, 
    and then press [SET].
    •To cancel the brightness adjustment operation, press [W] 
    or [MENU].
    IMPORTANT!
    •Adjusting the brightness of an image creates a new image 
    with the new brightness level. The original image also 
    remains in memory.
    •When you display a brightness adjusted image on the 
    camera’s monitor screen, the date and time indicates when 
    the image was originally recorded, not when the brightness 
    was adjusted.
    To get tthis:Select this setting:
    Brighter
    Darker+2
    +1
     0
    –1
    –2
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							185EDITING IMAGES
    You can use the following procedure to reduce underexposure 
    only, while maintaining the bright areas of an image.
    1.In the PLAY mode, use [W] and [X] to select 
    the image you want to correct.
    2.Press [MENU].
    3.On the “PLAY” tab, select “Dynamic Range”, 
    and then press [X].
    4.Use [S] and [T] to select the setting you want 
    and then press [SET].
    IMPORTANT!
    •Performing Dynamic Range correction on an image causes 
    the new (corrected) version to be stored as a separate file.
    •When you display a corrected image on the camera’s 
    monitor screen, the date and time indicates when the 
    image was originally recorded, not when the image was 
    corrected.
    Reducing the Effects of 
    Underexposure
    When you want to do this:Select this 
    setting:
    Apply Dynamic Range to a greater 
    extent than “Expand +1”Expand +2
    Reduce underexposure Expand +1
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							186EDITING IMAGES
    You can perform the following cut operations on the camera to 
    edit movies you have recorded.
    IMPORTANT!
    •When you edit a movie, only the result is saved. The 
    original movie is not retained. Once you perform an editing 
    operation, you will not be able to undo it.
    •A movie that is shorter than five seconds cannot be edited.
    •The movie editing operation is supported only for movies 
    that were recorded with this camera.
    •You will not be able to edit a movie if the amount of 
    remaining memory capacity is less than the size of the 
    movie file you want to edit. If there is not enough memory 
    available, delete any files you no longer need to free up 
    more.
    •Cutting a movie into two parts or splicing of two movies in 
    to a single movie cannot be performed on the camera.
    Editing a Movie on the Camera
    OperationDescription
     Cut
    (To-Point Cut)Cuts everything from the current 
    location to the beginning of the movie.
     Cut
    (Point-To-Point Cut)Cuts everything between two points.
     Cut
    (From-Point Cut)Cuts everything from the current 
    location to the end of the movie.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							187EDITING IMAGES
    1.Play back the movie you want to edit.
    2.Press [SET] to pause 
    playback.
    •Check to make sure that 
    “ ” (cut icon) is 
    displayed on the monitor 
    screen. If it isn’t, press 
    [SET] again.
    3.Press [T].
    •You could also perform the following steps in place of 
    steps 1 through 3 above.
    1In the PLAY mode, select the movie you want to edit 
    and then press [MENU].
    2On the “PLAY” tab, select “Movie Editing” and then 
    press [X].
    4.Use [S] and [T] to select the cut operation 
    and then press [SET].
    •To cancel movie editing, select “Cancel” and then press 
    [SET]. This will return to the paused movie playback 
    screen.
    5.Select the frame 
    (point) where you 
    want to cut the movie.
    •To cancel the cut operation, press [MENU]. This will 
    return to the screen in step 3.
    Cut iconTo do this:Press this button:
    Fast forward or fast reverse 
    playback[X] or [W]
    Pause or unpause movie playback [SET]
    Scroll paused playback one frame 
    forward or back[X] or [W]
    Cut range (red)
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							188EDITING IMAGES
    6.Press [T] to perform the required cut 
    operation(s).7.In response to the confirmation message that 
    appears, use [S] and [T] to select “Yes” and 
    then press [SET].
    •To cancel movie editing, select “No” instead of “Yes” and 
    then press [SET]. This will return to the paused movie 
    playback screen.
    •The selected cut operation will take considerable time to 
    complete. Wait until the “Busy... Please wait...” message 
    disappears from the monitor screen before performing 
    any operation on the camera. Note that a cut operation 
    can take a very long time if the movie being edited is long.For this type of 
    cut operation:Do this:
     Cut
    (To-Point Cut)Select the point up to which you want 
    to cut and then press [T].
     Cut
    (From-Point Cut)Select the point from which you want 
    to cut and then press [T].
     Cut
    (Point-To-Point 
    Cut)1. Select the start point of the center 
    segment and then press [T].
    2. Select the end point of the center 
    segment and then press [T].
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							189EDITING IMAGES
    MOTION PRINT lets you capture a movie frame and use it to 
    create a snapshot. The snapshot you create can be either of the 
    two formats described below.
    1.In the PLAY mode, use [W] and [X] to scroll 
    through images and display the movie that 
    contains the frame you want to use.
    2.Press [MENU].
    3.On the “PLAY” tab, select “MOTION PRINT”, 
    and then press [X].
    4.Use [S] and [T] to select either “9 frames” or 
    “1 frame”.
    5.Use [W] and [X] to scroll through the movie 
    frames and search for the one you want to use 
    as the image of the snapshot.
    •Holding down [W] or [X] scrolls at high speed.
    Creating a Snapshot of a Movie Frame 
    (MOTION PRINT)
    9-frame 
    SnapshotThis format puts the 
    selected movie 
    frame in the center, 
    the four frames that 
    precede it along top 
    and the four frames 
    that follow it along 
    the bottom.
    1-frame 
    SnapshotThis format creates a 
    snapshot using the 
    selected movie 
    frame only.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							190EDITING IMAGES
    6.After displaying the movie frame you want, 
    press [SET].
    •If you selected “9 frames” in step 4, the camera will create 
    a 9-frame snapshot with the frame you selected in step 6 
    in the center.
    •If you selected “1 frame” in step 4, the camera will create 
    a snapshot of the frame you selected in step 6.
    IMPORTANT!
    •MOTION PRINT is not possible using a movie that was 
    recorded on a different type of camera.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    All Casio manuals Comments (0)

    Related Manuals for Casio Exilim EX V8 User Manual