Home > Casio > Digital Camera > Casio Exilim EX V8 User Manual

Casio Exilim EX V8 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Casio Exilim EX V8 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							211OTHER SETTINGS
    ■Setting the Date and Time for Your Home 
    City
    1.Press [MENU].
    2.On the “Set Up” tab, select “Adjust” and then 
    press [X].
    3.Set the date and the time.
    4.After all of the settings are the way you want, 
    press [SET] to exit the setting screen.
    ■Changing the Date Format
    You can select from among three different formats for the date.
    1.Press [MENU].
    2.On the “Set Up” tab, select “Date Style” and 
    then press [X].
    3.Use [S] and [T] to select the setting you want 
    and then press [SET].
    Example: December 19, 2007To do this:Do this:
    Move the cursor between settings Press [W] or [X]
    Change the setting at the cursor 
    locationPress [S] or [T]
    Toggle between 12-hour and 
    24-hour formatSlide the zoom 
    controller towards 
    [] or [].
    To display the date like this:Select this format:
    07/12/19 YY/MM/DD
    19/12/07 DD/MM/YY
    12/19/07 MM/DD/YY
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							212OTHER SETTINGS
    You can use the World Time screen to view the current time in 
    zone that is different from your Home City when you go on a trip, 
    etc. World Time displays the current time in 162 cities in 32 time 
    zones around the globe.
    Configuring World Time Settings
    1.
    Press [MENU].
    2.On the “Set Up” tab, select “World Time” and 
    then press [X].
    3.Use [S] and [T] to select “World” and then 
    press [X].
    4.Use [S] and [T] to 
    select “City” and then 
    press [X].
    •To configure the summer 
    time setting, use [S] and 
    [T] to select “DST” and 
    then select “On”.
    •Summer time is used in some areas to advance the 
    current time setting by one hour during the summer 
    months.
    •Use of summer time depends on the local customs and 
    laws.
    Using World Time
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							213OTHER SETTINGS
    5.Use [S], [T], [W], and [X] to select the area 
    where the city you want to view is located and 
    then press [SET].
    6.Use [S] and [T] to select the city you want 
    and then press [SET].
    7.After the setting is the way you want, press 
    [SET] to exit the setting screen.
    ■Switching between the Home Time and 
    World Time Screens
    1.Press [MENU].
    2.On the “Set Up” tab, select “World Time” and 
    then press [X].
    3.Use [S] and [T] to select “World” for the 
    World Time screen, or “Home” for the Home 
    Time screen.
    4.After selecting the screen you want, press 
    [SET] to exit the setting screen.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							214OTHER SETTINGS
    You can use the procedure below to select a display text 
    language.
    •The number and types of languages depend on the 
    geographic area where the camera was marketed.
    1.Press [MENU].
    2.On the “Set Up” tab, select “Language” and 
    then press [X].
    3.Use [S], [T], [W], and [X] to select the setting 
    you want and then press [SET].
    ■If the display contents are in the wrong 
    languageChanging the Display Language
    1
    : Select this tab.
    2: Select the “Language” item.
    3: Select the language you want.
    1
    23
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							215OTHER SETTINGS
    You can use the following procedure to change the brightness of 
    the monitor screen.
    1.Press [MENU].
    2.Select the “Set Up” tab, select “Screen”, and 
    then press [X]
    3.Use [S] and [T] to select the setting you want, 
    and then press [SET].
    Changing the Brightness of the 
    Monitor Screen
    When you want to do this:Select this 
    setting:
    Automatic adjustment of monitor screen 
    brightness in accordance with lighting 
    conditions
    •Auto 2 adjusts to a brighter setting more 
    quickly than Auto 1.Auto 1 or 
    Auto 2
    Higher monitor screen brightness than the 
    +1 setting
    •This setting consumes more power.+2
    Relatively higher monitor screen brightness 
    than the 0 setting (for outdoor use)
    •This setting consumes more power.+1
    Normal monitor screen brightness (for 
    indoor use)0
    When you want to do this:Select this 
    setting:
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							216OTHER SETTINGS
    You can use the procedure below to change the USB 
    communication protocol that is used when exchanging data with 
    a computer, printer, or other external device. Select the protocol 
    that suits the device to which you are connecting.
    1.Press [MENU].
    2.On the “Set Up” tab, select “USB” and then 
    press [X].
    3.Use [S] and [T] to select the setting you want 
    and then press [SET].Changing the USB Port Protocol
    When you want to connect to this type 
    of device:Select this 
    setting:
    Computer or a printer that supports USB 
    DIRECT-PRINT (page 220)
    With this setting, the computer sees the 
    camera as an external storage device. 
    Use this setting for normal transfer of 
    images from the camera to a computer 
    (using the bundled Photo Loader with 
    HOT ALBUM application).Mass Storage
    (USB DIRECT-
    PRINT)
    Printer that supports PictBridge (page 
    220)
    This setting simplifies the transfer of 
    image data to the connected device.PTP
    (PictBridge)
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							217OTHER SETTINGS
    You can use the procedure below to specify what happens when 
    you press the [ ] (PLAY) button.
    1.Press [MENU].
    2.On the “Set Up” tab, select “  Power On” 
    and then press [X].
    3.Use [S] and [T] to select the setting you want 
    and then press [SET].
    NOTE•The initial factory default for this setting is “Power On”.
    •Change this setting to anything besides “Disable” before 
    connecting to a TV for image viewing.
    Configuring [ ] (PLAY) Button 
    Settings
    To configure the button to do this when 
    pressed:Select this 
    setting:
    Turn on the camera Power On
    Turn on the camera when held down for 
    about one second
    •This setting prevents turning on the 
    camera accidentally when it is being 
    carried in a bag, etc.Hold: On
    Do not turn on the camera Disable
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							218OTHER SETTINGS
    Formatting built-in memory deletes any data stored in it.
    IMPORTANT!
    •Note that data deleted by a format operation cannot be 
    recovered. Check to make sure you do not need any of the 
    data in built-in memory before you format it.
    •Formatting built-in memory also deletes the following.
    – Face Recognition data saved with Record Family
    – Protected images
    – FAVORITE folder images
    – BEST SHOT mode user setups
    – Startup screen
    •Make sure that the battery is charged fully before starting a 
    formatting operation. Formatting may not be performed 
    correctly and the camera may stop operating normally if the 
    camera powers down while formatting is in progress.
    •Never open the battery cover while formatting is in 
    progress. Doing so can cause the camera to stop operating 
    normally.
    1.Check to make sure there is no memory card 
    loaded in the camera.
    •If there is a memory card loaded in the camera, remove it.
    2.Press [MENU].
    3.On the “Set Up” tab, select “Format” and then 
    press [X].
    4.Use [S] and [T] to select “Format” and then 
    press [SET].
    This formats built-in memory.
    •To exit the format operation without formatting, select 
    “Cancel”.
    •Entering the PLAY mode after formatting the built-in 
    memory will cause the message “There are no files.” to 
    appear.
    Formatting Built-in Memory
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							219PRINTING
    PRINTING
    There are three different methods you can use for printing images.
    Types of Printing
    Professional 
    Print 
    Service 
    (page 220)Take the memory card that contains the images you want to print to a 
    professional print service.
    •You can use DPOF settings to specify which images you want to print, 
    the number of copies, and date stamp settings before taking the card in 
    for printing.
    Printing at 
    HomePrinting on a Printer (page 220) Print on a printer that supports PictBridge or USB DIRECT-PRINT, or on a 
    printer equipped with a memory card slot.
    •You can use DPOF settings to specify which images you want to print, 
    the number of copies, and date stamp settings before printing.
    Printing with a Computer■Windows Computer
    Install the software (Photo Loader with HOT ALBUM) that comes bundled 
    with the camera.
    See “Using the Camera with a Windows Computer” on page 230.
    ■Macintosh
    After transferring the images to your Macintosh, use commercially available 
    software to print.
    See “Using the Camera with a Macintosh” on page 253.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							220PRINTING
    ■Printing Precautions
    •See the documentation that comes with your printer for 
    information about print quality and paper settings.
    •Contact the manufacturer of your printer to find out if it 
    supports PictBridge or USB DIRECT-PRINT, for new printer 
    versions, etc.
    •Never disconnect cables or perform any camera or USB 
    cradle operation while printing is in progress. Doing so can 
    cause a printer error.
    Take a memory card that contains the images you want to print 
    to the professional print service. Before taking in a memory card, 
    you can use the camera’s DPOF settings (page 224) to specify 
    which images you want printed, the number of copies, and 
    whether or not the images should include a date stamp.If your printer is either of the types described below, you can use 
    it to print without going through a computer.
    – Printer equipped with a card slot for the type of memory 
    card you are using
    – Printer that support PictBridge or USB DIRECT-PRINT
    ■Printing on a Printer with a Memory Card 
    Slot
    Remove a memory card from the camera and insert it directly 
    into the printer’s memory card slot. Depending on what type of 
    printer you are using, it also may be able to read the settings 
    (images to be printed, number of copies, date stamping) you 
    configure with the camera’s DPOF settings (page 224). For 
    details, see the user documentation that comes with your printer.
    Using Professional Print Service
    Using Your Printer to Print Images
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    All Casio manuals Comments (0)

    Related Manuals for Casio Exilim EX V8 User Manual