Casio Exilim EX V8 User Manual

							271APPENDIX
■PLAY Mode
PLAY Tab Menu
USBMass Storage (USB DIRECT-PRINT)* / 
PTP (PictBridge)
Video OutNTSC 4:3 / NTSC 16:9 / PAL 4:3 / PAL 16:9
FormatFormat / Cancel*
ResetReset / Cancel*
SlideshowStart* / Images / Time / Interval / Effect / 
Cancel
Layout Print–
MOTION PRINT9 frames* / 1 frame / Cancel
 Anti ShakeOn / Off*
Movie EditingCut (Before) / 
Cut (Between) / 
Cut (After) / Cancel*
Dynamic RangeExpand +2 / Expand +1 / Cancel*
White Balance(Daylight) / (Overcast) /
(Shade) / (Day White 
Fluorescent) / (Daylight Fluorescent) / 
(Tungsten) / Cancel*
Brightness+2 / +1 / 0* / –1 / –2
Keystone–
Color Correction–
Calendar–
FavoritesShow* / Save / Cancel
DPOF PrintingSelect images* / All images / Cancel
ProtectOn* / All Files : On / Cancel
Date/Time–
N
D
Downloaded From camera-usermanual.com Casio Manuals 
						

							272APPENDIX “Set Up” Tab
•The contents of the “Set Up” tab are the same in a REC mode 
and PLAY mode.The camera has lamps: an Operation Lamp and an AF assist/
REC light/self-timer Lamp. These lamps light and flash to 
indicate the current operational status of the camera.
RotationRotate* / Cancel
Resize6M (2816 × 2112)* / 4M (2304 × 1728) / 
VGA (640 × 480) / Cancel
Trimming–
Dubbing–
CopyBuilt-in  Card* / Card   Built-in / Cancel
Indicator Lamps
Operation Lamp
AF assist/REC light/
self-timer Lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							273APPENDIX
■REC ModeIMPORTANT!
•Never remove the memory card from the camera while the 
operation lamp is flashing green. Doing so will cause the 
image you shot to be lost.
■PLAY mode
Operation LampMeaningColorStatus
GreenLitOperational (Power on, recording enabled). / 
Auto Focus operation was successful. / LCD 
is off or in sleep state.
FlashingStoring movie or processing image. / Image is 
being stored. / Cannot Auto Focus. / Card is 
being formatted. / Powering down.
RedLitMemory card is locked. / Cannot create 
folder. / Memory is full. / Write error.
FlashingMemory card problem. / Memory card is 
unformatted. / BEST SHOT setup cannot be 
registered. / Low battery alert.
Amber Flashing Flash is charging.
AF assist/
REC light/
self-timer Lamp
Meaning
ColorStatus
White Flashing Self-timer countdown.
Operation LampMeaningColorStatus
GreenLit Operational (Power on, recording enabled).
FlashingOne of the following operations is in progress: 
Delete, DPOF, protect, copy, format, resize, 
trimming, adding audio to snapshot, keystone 
correction, color correction, MOTION PRINT, 
movie editing, power down.
RedLitMemory card is locked. / Cannot create 
folder. / Memory is full. / Write error.
FlashingMemory card problem. / Memory card is 
unformatted. / Low battery alert.
Downloaded From camera-usermanual.com Casio Manuals 
						

							274APPENDIX
■USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE] lamp and 
a USB lamp. These lamps light and flash to indicate the current 
operational status of the cradle and camera.
[CHARGE] lamp
USB Lamp
[CHARGE] LampUSB LampMeaningColorStatusColorStatus
Red Lit Charging
Green Lit Charging complete
Green Flashing Charge standby
Red Flashing Charge error
Green Lit USB connection
Green Flashing Memory being accessed.
Downloaded From camera-usermanual.com Casio Manuals 
						

							275APPENDIX
Finding the Problem and Fixing It
Troubleshooting Guide
ProblemPossible Causes and Action
Power Supply
Power does not turn on. 1) The battery may not be oriented correctly (page 36).
2) The battery may be dead. Charge the battery (page 36). If the battery goes dead soon after being 
charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a 
separately available CASIO NP-50 rechargeable lithium ion battery.
The battery won’t charge. The battery may not be oriented correctly (page 36).
Camera suddenly powers 
down.1) Auto Power Off may have activated (page 45). Turn power back on.
2) The battery may be dead. Charge the battery (page 36).
3) The camera’s protection function may have activated because camera temperature is too high. Turn off 
the camera and wait until it cools down before trying to use it again.
Power does not turn off.
Nothing happens when a 
button is pressed.Remove the battery from the camera and then reinsert it.
Image Recording
Image is not recorded when 
the shutter button is pressed.1) If the camera is in the PLAY mode, press [ ] (PLAY) to enter the REC mode.
2) If the flash is charging, wait until the charge operation finishes.
3) If the message “Memory Full” appears, transfer images to your computer, delete images you no longer 
need, or use a different memory card.
Auto Focus does not focus 
properly.1) If the lens is dirty, clean it off.
2) The subject may not be in the center of the focus frame when you compose the image.
3) The subject you are shooting may not be a type that is not compatible with Auto Focus (page 68). Use 
manual focus (page 131).
4) You may be moving the camera when shooting. Try shooting with Anti Shake (page 133) or use a tripod.
5) You may be using Quick Shutter and pressing the shutter button all the way, resulting in poor focus. 
Half-press the shutter button and allow enough time for Auto Focus to focus.
Downloaded From camera-usermanual.com Casio Manuals 
						

							276APPENDIX
The subject is out of focus in 
the recorded image.The image may not be focused properly. When composing the image, make sure the subject is located 
inside the focus frame.
The flash does not fire. 1) If “ ” (Flash Off) is selected as the flash mode, change to another mode (page 72).
2) If the battery is dead, charge it (page 36).
3) If a BEST SHOT scene that uses the “ ” (Flash Off) flash mode is selected, change to a different 
flash mode (page 72) or select a different BEST SHOT scene (page 104).
Camera powers down during 
self-timer countdown.The battery may be dead. Charge the battery (page 36).
The monitor screen image is 
out of focus.1) You may be using Manual Focus and have not focused the image. Focus the image (page 131).
2) You may be using the macro mode   for scenery or portraits. Use Auto Focus for scenery and 
portrait shots (page 124).
3) You may be trying to use Auto Focus or the Infinity mode   when shooting a close-up shot. Use the 
Macro mode for close ups (page 125).
There is a vertical line on the 
monitor screen.Shooting a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is 
a CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that 
vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a 
movie.
There is digital noise in 
images.1) Sensitivity may have been increased automatically for a dark subject, which increases the chance of 
digital noise. Use a light or some other means to illuminate the subject.
2) You may be attempting to shoot in a dark location while “ ” (Flash Off) is selected as the flash mode, 
which can increase digital noise and make images appear coarse. In this case, change to a different 
flash mode (page 72) or use lights for illumination.
3) Flash assist or dynamic range may be enabled for snapshots, which can cause an increase in digital 
noise. Use a light or some other means to illuminate the subject.
ProblemPossible Causes and Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							277APPENDIX
An image I shot was not 
saved.1) Camera power may have been turned off before the save operation was complete, which will result in 
the image not being saved. When the battery indicator shows “ ”, charge the battery as soon as 
possible (page 36).
2) You may have removed the memory card from the camera before the save operation was complete, 
which will result in the image not being saved. Do not remove the memory card before the save 
operation is complete.
Though available lighting is 
bright, the faces of people in 
the image are dark.Not enough light is reaching the subjects. Change the flash mode setting to “ ” (Flash On) for daylight 
synchro flash (page 72), or use adjust EV shift to the + side (page 136).
Subjects are too bright when 
shooting images in a 
seashore or ski area.Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode 
setting to “ ” (Flash On) for daylight synchro flash (page 72), or use adjust EV shift to the + side (page 
136).
Digital zoom does not work. 
The zoom bar indicates zoom 
only up to a zoom factor of 
7.0.1) Using digital zoom while Layout Shot, Auto Framing, Old Photo, or certain other BEST SHOT scenes 
are selected causes deterioration of the image.
2) Time stamping may be turned on, which will cause digital zoom to be disabled. Turn off time stamping 
(page 147).
Recognition of a family 
member’s face is not 
recognized correctly, even 
though the face has been 
recorded. Though face characteristics were recorded for your family member, the data may have been faulty, or the 
angle to the face or its expression may be making recognition difficult. Re-record the face of the family 
member who is not being recognized (page 85). 
The image is out of focus 
during movie recording.1) Focusing is not possible because the subject is outside the focus range. Shoot within the allowable 
range.
2) The subject you are shooting may be difficult to focus (page 68).
3) The lens may be dirty. Clean the lens (page 35).
ProblemPossible Causes and Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							278APPENDIX
Playback
The color of the playback 
image is different from what 
appears on the monitor 
screen when shooting.Sunlight or light from another source may be shining directly into the lens when you are shooting. Position 
the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
I can’t edit images (layout 
print, resizing, trimming, 
keystone correction, color 
restoration, rotation, white 
balance, date/time editing).Note that you cannot edit the following types of imagess.
 Images created with MOTION PRINT

 Images recorded with another camera
ProblemPossible Causes and Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							279APPENDIX
Other
The wrong date and time are 
displayed.The date and time setting is wrong. Set the correct date and time (page 210).
The messages on the display 
are in the wrong language.The wrong display language is selected. Change the display language setting (page 214).
I can’t transfer images over a 
USB connection.1) The USB cable may not be connected securely. Check all connections.
2) If your computer is running Windows 98SE or 98, the USB driver may not be installed. Install the USB 
driver (page 234), which you can download from the official EXILIM Website at http://www.exilim.com/
3) If your computer is running Windows 98SE or 98, the USB driver may be installed incorrectly. Reinstall 
the USB driver correctly (page 234).
4) The wrong USB communication protocol may be selected. Select the correct USB communication 
protocol in accordance with the type of device you are connecting (page 216).
5) If the camera is not turned on, turn it on.
Display language setting 
screen appears when the 
camera is turned on.1) You did not configure initial settings after purchasing the camera or the battery may have been left with 
a dead battery. Check the camera setup (pages 11, 210).
2) It may be a problem with the camera’s built-in memory management area. If this is the case, perform the 
reset operation to initialize the camera’s setup (page 155). After that, configure each setting. If the 
language selection screen does not re-appear when you turn the camera on, it means that the camera’s 
built-in memory management area has been restored. 
If the same message appears after you turn power back on, contact your retailer or a CASIO service 
center.
ProblemPossible Causes and Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							280APPENDIX
Display Messages
ALERTThe camera’s protection function may have 
activated because camera temperature is too 
high. Turn off the camera and wait until it cools 
down before trying to use it again. 
 Any of the following may occur after the 
“ALERT” message appears.
1) Power turns off. 
2) Movie recording is impossible or movie 
length is limited. 
3) Monitor screen brightness setting changes 
to 0. 
Battery is low.Battery power is low.
Cannot correct 
image!Keystone correction of the image cannot be 
performed for some reason. The image will be 
stored as-is, without correction (page 112).
Cannot find the 
file.The image you specified with the slideshow 
“Images” setting cannot be found. Change the 
“Images” setting (page 161) and try again.
Cannot register 
any more files. You are attempting to save a BEST SHOT 
scene when there are already 999 scenes in 
the “SCENE” folder (page 109).
 You are attempting to copy a FAVORITE file 
when the “FAVORITE” folder already 
contains 9999 files (page 199).
Card ERRORThere is something wrong with the memory 
card. Turn off the camera, remove the memory 
card, and then reload it into the camera. If this 
message re-appears when you turn the 
camera back on, format the memory card 
(page 50).
 Formatting the memory card deletes all 
its files. Before formatting, try transferring 
recoverable files to a computer or some 
other storage device.
Check 
connections! You are attempting to connect the camera to 
a printer while the camera’s USB settings are 
not compatible with the USB system of the 
printer (page 216).
 If your computer is running Windows 98SE 
or 98, the USB driver may not be installed 
(page 234).
Files could not 
be saved 
because battery 
is low.Battery power is low, so an image file could not 
be saved.
Folder cannot be 
created.You are trying to record a file while there are 
already 9,999 files stored in the 999th folder. If 
you want to record more, delete files you no 
longer need (page 204).
LENS ERRORThis message appears and the camera turns 
off whenever lens performs some unexpected 
operation. If the same message appears after 
you turn power back on, contact your retailer 
or a CASIO service center.
IMPORTANT!
B
Downloaded From camera-usermanual.com Casio Manuals