Casio Qt 6000 User Manual

							Introducing QT-6000
QT-6000 User’s Manual11E
Tilt the touch screen panel
Card slot cover
Rear view
Panel fixing screws
1. Loosen the panel fixing screws.
(Turn the screw more than one round.)
2. Tilt the touch screen panel. 3. Tighten the panel fixing screws.
Important!
Do not tilt without loosing the screws. 
						

							Introducing QT-6000
12E
When the cash drawer does not open! (for medium size drawer only)
In case of power failure or the machine is in malfunction, the cash drawer does not open
automatically. Even in these cases, you can open the cash drawer by pulling drawer release
lever (see below).
Important!
The drawer will not open, if it is locked with a drawer lock key.
Display on/off key
This key is used for turning on/off the terminal display.
i-Button key (only for QT-6000-DLS)
You can assign the clerk or cashier by attaching an i-
Button key to the receiver.
Drawer (option)
The drawer opens automatically whenever you finalize
a registration and you issue a read or reset report.
Drawer lock (for medium size drawer)
Use the drawer key to lock and unlock the drawer.
Drawer open key (for large size drawer)
Use the drawer open key to open the drawer.Display on/off key
Receiver
i-Button keys 
						

							Introducing QT-6000
QT-6000 User’s Manual13E
PLU010 PLU020 PLU030 PLU040 PLU050
PLU009 PLU019 PLU029 PLU039 PLU049
PLU008 PLU018 PLU028 PLU038 PLU048
PLU007 PLU017 PLU027 PLU037 PLU047
PLU006 PLU016 PLU026 PLU036 PLU046
PLU005 PLU015 PLU025 PLU035 PLU045
PLU004 PLU014 PLU024 PLU034 PLU044
PLU003 PLU013 PLU023 PLU033 PLU043
PLU002 PLU012 PLU022 PLU032 PLU042
PLU001 PLU011 PLU021 PLU031 PLU041 CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
Shift PLU1 Menu1 2nd@REG  C01      31-10-04  12:34    001234
               •0.00
1
3
2
Touch screen panel
You can use this panel both for display and for keyboard.
•This panel consists of 2 parts; display part and keyboard part.
1Main display part: Used for displaying numeric entries, registration, subtotal amount, etc.
2Menu level display part: Used for displaying the current shift PLU, menu sheet and 2nd unit price level.
3Keyboard part: Mainly used for keyboard (sometimes it is used for pop-up window)
Note:
Use only your fingers to perform screen operations.
Never use pencil, a mechanical pencil, or any other
pointed object. Such objects can damage the screen. 
						

							Introducing QT-6000
14E
Main display part
Menu level display part
REG  C01       31-10-04 12:34 PM 001234
   1  Spagetti                •20.00 T1
¨
   1  Spagetti                •20.00 T1
      7.5%
      %-                       -1.75 T1
   1  Coffee                   •8.00
   1  Hamburger                •2.00 T1
      15%
      %-                       -0.30 T1
   1  Milk                     •2.00
   2  Apple Juice              •5.00
   1  Coffee                   •8.00   ´
Spagetti      •20.00
§  ©ª   12    •76.50
Status Icons
• Communication: 
§• Receipt on: ©
• Master/BM error: ¶• Character size:
• Cut off Master or BM: 
ßDouble size: ª
Standard size: π
Items sold
Amount (total/change)Current transaction
Scroll area
Mode Clerk Date Time Consecutive number
SHIFT PLU 1 Menu shift 1 2nd@
Shift PLU level (1 ~ 8) Menu sheet (1 ~ 15) 2nd unit Price level (1 ~ 2) 
						

							Introducing QT-6000
QT-6000 User’s Manual15E
1Registered item quantity
This part of the display shows item count of each
item.
2Item/key descriptor
When you register a department/PLU/scanning PLU
or transaction key, the item descriptor or key de-
scriptor appears here.
3Tax status
When you register a taxable item, the corresponding
tax status appears here by programming.
4Check number
When you enter a check number, it appears here.
5Number of customer
When you enter number of customers, it appears
here.
6Ta ble number
When you enter a table number, it appears here.
Main display part example
Normal registration
Check tracking registration
REG  C01       31-10-04 12:34 PM 000123
   1 PLU0001                   •1.00 T1
   2 PLU0002                   •2.00
   1 PLU0003                   •3.00
     TL                   
•6.00     CASH                     •10.00
     CG                        •4.00
CG             •4.00
   ©
                 Please sign on
1
23
REG  C01       31-10-04 12:34 PM 000123CHECK No.123456       5CT  #001029
   1 PLU0001                   •1.00   ¨
   2 PLU0002                   •2.00
   1 PLU0003                   •3.00
   1 PLU0004                   •2.00
   3 PLU0005                   •3.00
   2 PLU0006                   •2.00
   1 PLU0007                   •3.00
   1 PLU0008                   •2.00
   3 PLU0009                   •3.00
   1 PLU0010                   •1.00
PLU0010        •1.00
   ©   22    •102.00
4
56 
						

							Introducing QT-6000
16E
Keyboard part
•Register Mode
1ESC/SKIP key \
Use this key to terminate a program sequence, X/Z
sequence, and return the primary status. This key is also
used to terminate a report being issued in PGM, X, and Z
mode.
2Clerk key Ç, É ~ ±
Use this key to sign clerk on and off the terminal.
Clerk number key 
o
Use this key to sign clerk on and off the terminal by clerk
number.
3Clear key C
Use this key to clear an entry that has not yet been
registered.
4Ten key pad 0, 1 ~ 9, -, ^
Use the keys to input numbers.
5Multiplication/Date/Time key |
Use this key to input a quantity for a multiplication
operation. Between transactions, this key displays the
current time and date.
6Error correct/Void key ~
Use this key to correct the last registered item, discount,
premium, amount tendered etc. This key also invalidates
proceeding data registered for PLUs or set menus etc.
7Left, right, up, down arrow key
y, u, ?, >
Use these keys to move the cursor.
8Mode key °
Use this key to change mode. This key shows the allow-
able mode keys in the pop-up window.
9Non-add/No sale key N
Non-add key: To print reference number (to identify a
personal check, credit card, etc.) during a transaction, use
this key after some numerical entries.
No sale key: Use this key to open the drawer without
registering anything.
0Subtotal key s
Use this key to display and print the current subtotal
(includes add-on tax) amount.
PLU010 PLU020 PLU030 PLU040 PLU050
PLU009 PLU019 PLU029 PLU039 PLU049
PLU008 PLU018 PLU028 PLU038 PLU048
PLU007 PLU017 PLU027 PLU037 PLU047
PLU006 PLU016 PLU026 PLU036 PLU046
PLU005 PLU015 PLU025 PLU035 PLU045
PLU004 PLU014 PLU024 PLU034 PLU044
PLU003 PLU013 PLU023 PLU033 PLU043
PLU002 PLU012 PLU022 PLU032 PLU042
PLU001 PLU011 PLU021 PLU031 PLU041 CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
REG  C01      31-10-04  12:34 PM 001234
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
                 •0.00 
12345678901234567890
13567
8
9
B
2
C
0
A
D
E
F
G
H
L
M
N
O
7
7
K
7
J
IP
42 
						

							Introducing QT-6000
QT-6000 User’s Manual17E
ACash/Amount tendered key a
Use this key to register a cash tender.
BYes key `
Use this key to consent the selection and proceeding
steps.
CFunction list key ´
Use this key to show the programmed function key list.
Use this key to register the function key which is not
located on the keyboard but assigned in the memory.
DNo key _
Use this key to cancel the selection and proceeding steps.
ENumber of customer key [
Use this key to register the number of customers.
FSeparate check key ≤
Use this key in a check tracking system to separate
selected items from one check to another check.
If this key is registered, a pop-up window for separating
a check is opened.
GFinalization list key ≥
Use this key to show the programmed finalization key
list. Use this key to register the finalization key which is
not located on the keyboard but assigned in the memory.
HPost receipt key ;
Use this key to produce a post-finalization receipt.
IPage up key g
Use this key to turn the window forwards.
JHome position key z
Use this key to return the cursor to the home position.
KPage down key w
Use this key to turn the window backwards.
LMenu shift key ã
Use this key to shift Flat-PLU key to n-th (1 ~ 15) menu.
MTable transfer key ]
Use this key to transfer the contents of a check to another
check.
NNew balance key S
Use this key to add the current registered total amount to
the previous balance to obtain a new balance. When this
key is pressed, the total amount of the transaction is
calculated. Normally, a receipt is issued.
ONew/Old check key Z
Use this key in a check tracking system to input check
numbers in order to open new checks and to reopen
existing checks. When the clerk inputs a check number,
the register checks to see if that number already exists in
the check tracking memory. If there is no matching
number in the memory, a new check is opened under the
input number. If the check number matches a number
already stored in the memory, that check is reopened for
further registration or finalization.
PFlat-PLU key (, ) ~ ñ
Use these keys to register items to flat-PLUs. 
						

							Introducing QT-6000
18E
Keyboard part with pop-up window
List pop-up window
PLU010 PLU020 PLU030 PLU040 PLU050
PLU009 PLU019 PLU029 PLU039 PLU049
PLU008 PLU018 PLU028 PLU038 PLU048
PLU007 PLU017 PLU027 PLU037 PLU047
PLU006 PLU016 PLU026 PLU036 PLU046
PLU005 PLU015 PLU025 PLU035 PLU045
PLU004 PLU014 PLU024 PLU034 PLU044
PLU003 PLU013 PLU023 PLU033 PLU043
PLU002 PLU012 PLU022 PLU032 PLU042
PLU001 PLU011 PLU021 PLU031 PLU041 CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
Shift PLU1 Menu1 2nd@REG  C01      31-10-04  12:34 PM 001234
               •0.00
How to Cook 0/1-1
Rare
Medium
Well-done
PLU010 PLU020 PLU030 PLU040 PLU050
PLU009 PLU019 PLU029 PLU039 PLU049
PLU008 PLU018 PLU028 PLU038 PLU048
PLU007 PLU017 PLU027 PLU037 PLU047
PLU006 PLU016 PLU026 PLU036 PLU046
PLU005 PLU015 PLU025 PLU035 PLU045
PLU004 PLU014 PLU024 PLU034 PLU044
PLU003 PLU013 PLU023 PLU033 PLU043
PLU002 PLU012 PLU022 PLU032 PLU042
PLU001 PLU011 PLU021 PLU031 PLU041 CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
Shift PLU1 Menu1 2nd@REG  C01      31-10-04  12:34 PM 001234
               •0.00
FUNC LIST
SEAT# CANCEL
ADDCHK -
VAT %-
MEDIA CHG RC
RCT ON/OFF PD
Staydown counters
(registered/minimum maximum numbers)
Keys of the list
Check number pop-up window
010 020 030 040 050
009 019 029 039 049
008 018 028 038 048
007 017 027 037 047
006 016 026 036 046
005 015 025 035 045
004 014 024 034 044
003 013 023 033 043
002 012 022 032 042
001 011 021 031 041
CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
Shift PLU1 Menu1 2nd@REG  C01      31-10-04  12:34 PM 001234
               •0.00
Select Check/Table number
#1
•1.45
#2
•7.00
#3 #4
•1.95 •8.01
#5 #6
•231.45•4.00
#7
•2,356.45
#8 #9
•103.00•8.00
Next Prev Rcpt Esc
View-1 View-2 View-3 View-4
010 020 030 040 050
009 019 029 039 049
008 018 028 038 048
007 017 027 037 047
006 016 026 036 046
005 015 025 035 045
004 014 024 034 044
003 013 023 033 043
002 012 022 032 042
001 011 021 031 041
CXVOID
789
456
123
000•CLK4
CLK3
CLK2
CLK1ESC/
SKIPPAGE
DOWN
FUNC
LIST
FIN.
LIST
CASH/AMT
   /TENDSEP
CHK
NEW/OLDCHK TBL
TRANSPAGE
UP
HOME
YES NO
MODE CLK#
COVERSMENU
#/NS
SUBTOTAL NB
RECEIPT
Shift PLU1 Menu1 2nd@REG  C01      31-10-04  12:34 PM 001234
               •0.00
Select Check/Table number
#1 #2
•1.45 •23.00
#3 #4
•76.45 •7.00
#5 #6
•1.95 •8.01
#7 #9
•231.45•4.00
#12 #17
•2,356.45•9.98
#18 #20
•103.00•8.00
Next Prev Rcpt Esc
Add-on new number type Show table layout type
Check/Table number window 
						

							Introducing QT-6000
QT-6000 User’s Manual19E
Allocatable functions
You can tailor a keyboard to suit your particular type of
business.
Consult your CASIO dealer for detail information.
Add check
Use this key in a check tracking system to combine the
details of more than one check into a single check.
Arrangement
Use this key to activate an arrangement program pro-
grammed in the arrangement file. Any operation that can
be performed from the keyboard, as well as mode, can be
programmed in an arrangement program, and can be
performed merely by pressing this key. In addition, one
numeric entry can be included in an arrangement pro-
gram. In this case, input the number and press this key.
The mode control function of this key can be pro-
grammed for all modes except for the OFF mode.
Bill copy
Use this key to issue bill copy.
Break-in/out
Use this key to register the starting/finishing time when
employees have a recess.
Charge
Use this key to register a charge sale.
Check
Use this key to register a check tender.
Check endorsement
Use this key to print a preset check endorsement message
using the slip printer.
Check print
Use this key to print the check on the slip printer.
Clerk number
Use this key to assign a clerk’s secret number.
Clerk transfer
Use this key to transfer opened checks to another clerk.
Clock-in/out
Use this key to register the time when the employees
start/finish their job.
Coupon
Use this key for registering coupons.
Coupon number
Use this key for registering mix and match discount by
entering coupon number.
Coupon 2
Use this key to declare the next item registration as
coupon.
Credit
Use this key to register a credit sale.
Cube
This key provides the same functions as the Square key.
In addition, this key also has a cube multiplication
function.
Currency exchange
Use this key to convert foreign currency to local currency
or vice versa using the exchange rate preset for the key
and displays the result.
Use this key for conversions of a home currency subtotal
or merchandise subtotal to equivalent of another
countrys currency.
Use this key for conversions of another countrys cur-
rency to the equivalent of the home currency.
Customer ID number
Use this key to enter customer ID number.
Declaration
Use this key to declare in drawer amount for money
declaration.
Department
Use this key to register department.
Department number
Use this key to enter department number.
Deposit
Use this key to register deposits.
Discount
Use this key to register discounts.
Display mode
Use this key to choose item consolidation display format
or non-item consolidation display format.
Dutch account
Use this key to share the total payment by customers.
Eat-in
Use this key to specify if the customer eats in the restau-
rant. Before closing a transaction press this key.
EBT (electronic benefit transfer)
Use this key to register an EBT amount with a tender
amount input.
Electronic journal display
Use this key to display the stored journal.
Euro/Paid out
Euro key: Use this key to convert the main currency to
the sub currency (the euro/the local money), when
registering the subtotal amount. This key is also used for
specifying sub currency while entering an amount of
payment.
Paid out key: Use this key following a numeric entry to
register money paid out from the drawer.
1st unit price
Use this key to register a specific item at the first unit
price.
Food stamp shift
Use this key to change food stamp status.
Food stamp subtotal
Use this key to obtain the food stamp applicable amount.
Food stamp tender
Use this key to register a food stamp payment amount
with a tender amount input.
House Bon
Use this key to register items for in-store use.
Item search
Use this key to search an item by its name. 
						

							Introducing QT-6000
20E
List
Use this key to display menu lists.
List number
Use this key to enter list number.
Loan
Use this key to input the amount of money provided
making change.
Location change
Use this key to select the window which shows the table
layout of each floor/part of the restaurant.
Ketten Bon
Use this key to enter quantities for multiplication.
Multiplication by this key issues singular order prints.
Media change
Use this key to change media in drawer amounts.
Merchandise subtotal
Use this key to obtain subtotal excluding the add-on tax
amount and the previous balance.
Minus
Use this key register subtraction.
New check
Use this key in a check tracking system to input a new
check number in order to open a new check under that
number.
No sale
Use this key to open the drawer between transaction.
Non-add
Use this key to print reference numbers (personal check
number, card number, etc.)
Normal receipt
Use this key to change the order status from Bon to
normal.
OBR (Optical barcode reader)
Use this key to input optical barcodes manually.
Old check
Use this key in a check tracking system to input the
number of an existing check (previously created by the
New check key) whose details are stored in the check
tracking memory. Existing checks are reopened to
perform further registration or to finalize them.
Open
Use this key to temporary release a limitation on the
number of digits that can be input for a unit price.
Open 2
Use this key to suspend the compulsory specifications.
Open check
Use this key to issue an open check report of an assigned
clerk.
Operator number
Use this key to enter a clerk number during clerk trans-
fer.
Operator X/Z
Use this key to issue a clerk’s individual X/Z report.
Order character change
Use this key to change the order character. The order
characters not only of the item but in the order character
table can be printed.
Payment
Use this key to declare the following transactions as
payment.
PLU number
Use this key to enter PLU number.
Plus
Use this key for registering surcharge.
Pick up
Use this key to pick up media in drawer.
Premium
Use this key to apply a preset % or manual input % to
obtain the premium amount for the last registered item or
subtotal.
Price
Use this key to register an open PLU.
Price inquiry
Use this key to confirm the price and descriptors of PLU
without registering.
Price shift
Use this key to shift a PLU item/flat-PLU key to the 1st ~
2nd unit price, a scanning PLU to the 1st ~ 3 rd unit
price.
Post entry
Use this key to indicate the reserved item of set menu
and register it as a fixed item later on.
Post receipt
Use this key to produce a post-finalization receipt.
Quantity/for
This key provides the same functions as the multiplica-
tion key. In addition, this key also has a split price
function.
Recall
Use this key for recalling the transferred check number
by the store key. When this key is pressed, the check
number will appear in order of the oldest record.
Receipt on/off
Use this key to change the setting “Receipt issue”/”No
receipt issue” in REG/REF/REG– modes.
This key should be pressed twice.
Received on account
Use this key following a numeric entry to register money
received for non-sale transaction.
Refund
Use this key to input refund amounts and void certain
entries.
Round repeat
Use this key to register the same items which were
ordered just before.
Seat number
Use this key to enter and print seat number.
2nd unit price
Use this key to register a specific item at the second unit
price.
Separate check
Use this key in a check tracking system to separate
selected items from one check to another check.
Selective item subtotal
Use this key to obtain the selective item 1/2 of subtotal
amount.