Christie Ds+6k User Manual

							Appendix G: Index  
F-2 020-100001-01 Rev. 01 (04/07) 
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal 
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input 
signals from computers or other RGB source devices. Video inputs are 75
Ω 
terminated. Video outputs provide buffered loop-through to another display device. 
 
RGB400ALT Features 
• Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or 
separate horizontal and vertical sync) 
• Accepts YPbPr, composite (on green) and Y/C (on red/blue) 
• BNC connectors for RGB signal inputs 
• Buffered loop-through video outputs 
NOTE: The audio connectors are not functional.  
The PC250 Analog Input Module may be installed in this projector, a Marquee Signal 
Switcher or a Marquee Case/Power Supply. The module receives analog RGB input 
signals from IBM PC compatibles or Macintosh computers. Video inputs are 75
Ω 
terminated. Video outputs are provided for buffered loop-through to another display 
device. 
 
PC250 Analog Features 
• Accepts VGA or MAC RGB video 
• 15 pin D connectors for video 
• Active loop-through video outputs 
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2) 
The audio connectors are not functional. 3) Trademarks are the rights of their 
respective owners. 
This module can display digital video input signals conforming to the DVI (Digital 
Visual Interface) single-channel standard. 
 
 RGB400 Active Loop-Thru f 
 Input Module 
 38-804607-
xx 
 PC250 Analog f 
 Input Module 
 38-804609-
xx 
 DVI Input Module f
 
 38-804635-xx  
						

							 Appendix G: Index 
020-100001-01 Rev. 01 (04/07)   F-3  
Features 
• Supports Digital Visual Interface (DVI) single-channel  
• Supports VESA® Extended Display Identification Data (EDID™)  
• Provides an active-loop-through using a DVI connector (conforming to the 
DVI Specification) 
 
The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single 
SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC out to 
another device (such as another projector). Inputs are 75
Ω terminated. 
 
SDI Features 
• Accepts serial digital 4:2:2 component video (YCbCr)  
• Provides both a 
SERIAL IN and a SERIAL OUT BNC connector; includes status 
LEDs for signal and error 
• SMPTE 259M compatible 
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be 
tiled across multiple screen displays, overlapped for extra-bright displays, or 
distributed to additional projectors for multiple, same-image screens. 
 
 
Dual SD/HD-SDI Features 
• Accepts and decodes up to two serial digital inputs 
• Outputs up to two 10-bit YCbCr 4:2:2 video signals 
• Provides input(s) to output(s) loop-through capability 
• Supplies interchangeable inputs as part of the Picture-in Picture display 
• SMPTE 259M and 372 compatible 
  Serial Digital Input Module f 
 38-804602-
xx 
 Dual SD/HD-SDI Module f
 
 38-804656-xx  
						

							 
Index 
 
020-100001-01 Rev. 01 (04/07) G-1   
3 
3D Simulation, 3-34 
3D Stereo Sync, 3-35 
A 
Ambient Lighting, 2-5 
Anamorphic, 3-22 
Arrow Keys, 2-9 
Auto Input Level, 3-29 
Auto Key, 3-5 
Auto Setup, 3-5 
AutoSource Checkbox, 3-19 
B 
Backlight, 3-42 
Bad Sync, 3-70 
Baud Rate, 2-17, 3-38 
Blacklevels and Drives, 3-29 
Blanking, 3-24 
Brightness Key, 3-7 
Brightness Uniformity 
Canceling, 3-64 
Definition, 3-60 
Prerequisites, 3-60 
Procedure, 3-60 
Submenu, 3-43 
Broadcast Key, 3-41 
Broadcasting, 3-9 
Built-in Keypad, 3-1 
C 
Cables 
Serial Communication, C-1 
Ceiling Mount, 2-11 
Channel 
Locked, 3-19 Name, 3-18 
Number, 3-15, 3-19 
Signal Type, 3-16 
Channel Copy/Delete, 3-17 
Channel Edit Menu, 3-18 
Channel Key, 3-6, 3-15 
Channel Selection, 3-15 
Channel Setup Menu, 3-16 
And Enter Key, 3-17 
And Function Key, 3-17 
Channels 
Creating Automatically, 3-15 
Creating in Channel Setup Menu,  
3-17, 3-18 
Definition of, 3-14 
Deleting in Channel Setup Menu,  
3-17 
Checkbox Toggles, 3-12 
ChristieNET. See 
Communications:ChristieNET 
Clamp Tip, 3-30 
Color Adjustment, 3-32, 3-43 
Color Saturation Submenu, 3-45 
XY Submenu, 3-44 
Color Enable, 3-47 
Color Matching, 3-57 
Color Space 
Selecting, 3-26 
Color Temperature, 3-33 
Communications 
ASCII Messaging, 3-68 
ChristieNET, 3-68 
Ethernet, 3-68 
Remote Control of Projector, 3-68 
Submenu, 3-38 
Component Video, 2-13 
Composite Video 
Connection, 2-14 
Configuration Menu, 3-36  
						

							Appendix G: Index  
F-2 020-100001-01 Rev. 01 (04/07) 
Contrast Key, 3-7, 3-25 
Custom Sizing, 3-20 
D 
Dark Interval, 3-34 
Date and Time 
Setting, 3-37 
Decoder AGC 
Enabling, 3-27 
Decoder Luma Delay, 3-28 
Detail 
Threshold, 3-36 
Diagnostics and Calibration, Submenu, 
3-46 
Display 
Channel List, 3-37 
Error Messages, 3-38 
Slidebars, 3-38 
DVI, 2-14 
E 
Edge Blending, 3-43 
Description, 3-64 
How Blends are Used, 3-64 
Main functions, 3-64 
Procedure, 3-66 
Enter Key, 3-9 
Error Messages 
Bad Sync, 3-70 
H-Sync or V-Sync, 3-70 
No Signal, 3-70 
System Warnings/Errors, 3-70 
Ethernet 
Communications, 2-16 
Troubleshooting, 5-3 
Ethernet Network, 2-18 
Ethernet Settings, 3-40 
Exit Key, 3-9 
F 
Fade Time, 3-37 
Film Mode Threshold, 3-36 
Filter, 4-4 
Freeze Image, 3-47 
Full Height, 3-21 
Full Screen, 3-21 
Full Width, 3-21 
Function Key, 3-8 
G 
Gamma, 3-25 Gamma Key, 3-7 
Geometry and Color, Submenu, 3-42 
Glossary of Terms, A-1 
H 
Help 
Context-sensitive, 3-11 
Horizontal Position, 3-23 
I 
Image 
Brightness, 3-25 
Contrast, 3-25 
Detail, 3-26 
Gamma, 3-25 
Image Adjustments, 3-19 
Image Blanking, 3-24 
Image Resizing, 3-20 
Image Size, 3-22, 3-23 
In Menu Checkbox, 3-19 
Input 
Definition of, 3-14 
Selecting/switching, 3-14 
Settings, Advanced, 3-32 
Input 3-2, 3-14 
Input Keys, 3-6 
Input Levels, 3-29 
Color Enable, 3-30 
Input Panel, 3-2 
Input Video Black, 3-28 
Installation 
Considerations, 2-3, 2-5 
Front Screen, 2-3 
Lighting, 2-5 
Screen Size, 2-4 
Throw Distance, 2-5 
Installation Type, 2-3 
Interfaces,Optional, 2-14 
Interpolated Color, 3-35 
Invalid Channel, 3-69 
IP Address, 3-40 
Setting, 3-18 
IR Sensors, 3-2 
IR Sensors, 3-42 
K 
Keypad, 2-15, B-1 
Built-in, 3-3 
Enabling Wire Remote, 3-42 
Guidelines, 3-5 
IR Remote, 3-3  
						

							 Appendix G: Index 
020-100001-01 Rev. 01 (04/07)    G-3  
Replacing Batteries, 4-5 
Wired, 5 
Keystone 
Correcting, 42 
L 
Lamp, 3-2, 4-4 
Failure to Ignite, 5-3 
History, 3-55 
Hours, 3-53 
Hours of Use, 3-56 
Intensity Setting, 3-54 
Limit, 3-53 
LiteLoc, 3-54 
Manu, 3-53 
Message, 3-53 
Mode, 3-54 
Optical Aperture, 3-55 
Recording Serial Number, 3-56 
Serial Number, 3-53 
Troubleshooting, 5-3 
Lamp Door, 3-2 
Lamp Modes 
Max Brightness, 3-54 
Power, 3-54 
Lamp Replacement, 4-5 
Language 
Choosing, 3-37 
Laser Key, 3-10 
LEDs, Status, 3-71 
Lens 
Offset Adjustment, 2-6, 2-9 
Replacement Procedure, 4-11 
Lens Mount, 3-2 
Level Value, 3-48 
Line Cord, 2-2 
Lite LOC Calibration, 3-49 
LiteLOC 
Troubleshooting, 5-3 
Locked Channel Checkbox, 3-19 
Luma Delay, 3-28 
M 
Menu 
Channel Edit, 3-18 
Channel Setup, 3-16 
Configuration, 3-36 
Image Settings, 3-25 
Lamp, 3-53 
Main, 3-10 
Size and Position, 3-20 
Test Pattern, 3-42 Menu Font Size, 3-37 
Menu Key, 3-7 
Menu Location on Screen, 3-37 
Menu Navigation, 3-10, 3-19 
Motion Filter, 3-36 
Multiple Projectors 
Description, 3-57 
N 
Network Routing, 3-39 
Network, Split. See Split Network 
No Resizing, 3-21 
No Signal, 3-70 
Noise Reduction, 3-26 
Numerical Entry, 3-14 
O 
Odd Pixel Adjustment, 3-47 
Level Detector, 3-48 
Offsets 
Horizontal, 2-6, 2-9 
Vertical, 2-6, 2-9 
Optical Aperture, 3-33 
Optional Input, 2-14 
Optional Input Modules, F-1 
OSD Key, 3-8 
P 
Peak Detector, 3-30, 3-48 
PIP, 3-50 
Border Color, 3-52 
Border Width, 3-52 
Enable, 3-51 
Image Settings. See Image Settings 
Pixel Phase, 3-22 
Pixel Tracking, 3-22 
Plug & Display (EDID), 3-24 
Port Number 
Changing, 2-18 
Entering, 3-40 
Power 
Connection, 2-20 
Line Cord, 2-2 
Setting for Lamp, 3-54 
Power Key, 3-5 
Powerup, Auto, 3-37 
Primary Colors, Adjusting, 3-57 
Projector 
Assigning/Changing Number, 3-38 
Error Conditions, 3-69 
Features, 1-1  
						

							Appendix G: Index  
F-4 020-100001-01 Rev. 01 (04/07) 
How it works, 1-2 
Mounting, 2-11 
Number, 3-14 
Quick Setup, 2-1 
Resetting, 3-70 
Projector Height, 2-11, 3-1 
Projector Key, 3-8 
Pull-Down Lists, Use of, 3-12 
R 
Remapping Keypad. See Working with 
PIP or Seamless Switching 
RGB 
Connection, 2-12 
RS-232 
Connection, 2-15 
RS-422 
Connection, 2-15 
S 
Screen Size, 2-5 
Seamless Switching. See Working 
with PIP or Seamless Switching 
Fade Time, 3-52 
Image Optimization. See Working 
with PIP or Seamless Switching 
Shutter Key, 3-8 
Slidebar Adjustment, 3-11 
Slidebars 
Direct, 3-12, 3-19 
Using, 3-12 
Source Setup. See Channel 
Splash Screen Setup. See Menu:Splash 
Screen Setup Split Network, 3-39 
Split Networks 
Options for Setup, 2-19 
S-Video 
Connection, 2-14 
Swap Main and PIP Image. See PIP 
Switcher, 3-19 
Sync 
Def. and types, 6-3 
System Integration 
GPIO Connector, 2-19, E-1 
T 
Test Key, 3-5 
Test Pattern Grey Level, 3-47 
Text 
Editing, 3-13 
Throw Distance, 2-5, D-1 
Time-outs, 3-11 
Troubleshooting 
Ethernet, 5-3 
Lamp, 5-3 
Power, 5-1 
V 
Ventilation, 3-2, 4-3 
Vertical Position, 3-23 
Vertical Stretch, 3-22 
Video Standards, 3-27 
Y 
YPbPr, 3-26 
Connection, 2-13