Cisco 6509 E Installation Manual
Have a look at the manual Cisco 6509 E Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2-21 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis (all variants). Bus connection Single connection into the 32-Gbps shared bus (all variants) Daughter card support PoE support WS-X6148-RJ-21—Field upgradeable to Cisco Prestandard only by installing the WS-F6K-VPWR= daughter card. Refer to the Cisco Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note for field upgrade procedures. NoteAn IEEE 802.3af standard PoE daughter card is available through factory advance replacement only; the IEEE 802.3af standard PoE daughter card is not field upgradeable. Distributed forwarding supportNot available. Pluggable transceivers supportNot supported. TDR support All variants supported. Module front panel LEDsSTATUS Green—All diagnostics pass; the module is operational. Orange—The module is booting or running diagnostics; an overtemperature condition has occurred. LINK Green—The port is active (the link is connected and operational). Flashing orange—The port failed diagnostics and is disabled. Orange—The port is disabled. Red—The module is resetting; an overtemperature condition has occurred. NoteIf the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. Off—The port is not active or the link is not connected. PHONE Green—The PoE daughter card is installed and detected. Off—The PoE daughter card is not detected or is not installed. Table 2-13 WS-X6148-RJ-21 Ethernet Modules Features (continued) Feature Description
2-22 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Table 2-14 WS-X6148-RJ-21 Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. Weight Base module only—8.0 lb (3.6 kg) Power and heat numbers WS-X6148-RJ-21 (base module) –Module current—2.39 A –Module power—100.38 W –AC-input power—125.48 W –AC heat dissipation—428.50 BTU/hour –DC-input power—134.92 W –DC heat dissipation—460.75 BTU/hour WS-X6148-21AF (base module + PoE daughter card) –Module current—2.57 A –Module power—107.94 W –AC-input power—134.93 W –AC heat dissipation—460.77 BTU/hour –DC-input power—145.08 W –DC heat dissipation—495.45 BTU/hour WS-X6148-RJ21V (base module + PoE daughter card)— –Module current—2.39 A –Module power—100.38 W –AC-input power—125.48 W –AC heat dissipation—428.50 BTU/hour –DC-input power—134.92 W –DC heat dissipation—460.75 BTU/hour Environment Operating temperature Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) Humidity (RH) ambient (noncondensing)10 to 90% Operating altitude Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m)
2-23 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules The WS-X6148-RJ-45 and the WS-X6148A-RJ-45 Ethernet modules provide 48 10/100-Mbps full- or half-duplex ports. Table 2-15 lists the two base modules and their variants. Figure 2-7 shows the module front panel. Figure 2-7 WS-X6148-RJ-45 Ethernet Module Front Panel NoteThe WS-X6148-RJ-45 and the WS-X6148A-RJ-45 Ethernet modules share the same front panel. The product numbers in the upper-left corner will differ. Table 2-16 lists the features and descriptions for the modules, and Table 2-17 lists the physical and environmental specifications for the modules. Table 2-15 WS-X6148-RJ-45 and WS-X61248A-RJ-45 Ethernet Modules and Variants Module Description WS-X6148-RJ-45 Base module without daughter cards installed. WS-X6148-45AF Base module equipped with a factory-installed IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF). WS-X6148-RJ45V Base module equipped with a factory-installed Cisco prestandard PoE daughter card (WS-F6K-VPWR-GE). WS-X6148A-RJ-45 Base module (with enhanced port buffer size) without daughter cards installed. WS-X6148A-45AF Base module (with enhanced port buffer size) equipped with a factory-installed IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF). 3933448 PORT 10/100 BASE-TETHERNET SWITCHING MODULE WS-X6348-RJ-45V STATUS123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 1 11 2 12 14 13 24 26 36 38 48 23 25 35 37 47 PHONE
2-24 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Table 2-16 WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules Features Feature Description Ports per module 48 ports (all variants). Ports are numbered (left to right): –Top row, odd numbered ports 1–47. –Bottom row, even numbered ports 2–48. Port groups: –WS-X6148-RJ-45—2 –WS-X6148A-RJ-45—6 Port ranges per port group: –WS-X6148-RJ-45: 1–24, 25–48 –WS-X6148A-RJ-45: 1–8, 8–16, 17–24, 25–32, 33–40, 41–48 Port connector type RJ-45 (all variants) Cabling distance 328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (all variants) Buffer size WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V—1 MB per 8 ports WS-X6148A-RJ-45 and WS-X6148A-45AF—5.3 MB per 8 ports QoS Number of egress queues: 2 (6148), 4 (6148A) Number of ingress queues: 1 (6148), 2 (6148A) Number of thresholds per egress queue: 2 (6148), 8 (6148A) Number of thresholds per ingress queue: 4 (6148), 4 (6148A) Maximum frame size WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V—Up to 8092 bytes per frame WS-X6148A-RJ-45 and WS-X6148A-45AF—Up to 9216 bytes per frame Module oversubscription rate 1.2:1 Supervisor engine support Supported on the following supervisor engines: Supervisor Engine 2 Supervisor Engine 32 Supervisor Engine 32 PISA Supervisor Engine 720 Supervisor Engine 720-10GE Supervisor Engine 2T (only supported with the WS-X6148A-RJ-45 and the WS-X6148A-45AF Ethernet modules)
2-25 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Software supportWith Supervisor Engine 2—12.1(12c)E1 With Supervisor Engine 32—12.2(18)SXF With Supervisor Engine 32 PISA—12.2(18)ZY With Supervisor Engine 720—12.2(18)SXF (6148A) With Supervisor Engine 720 except with WS-F6K-48-AF PoE daughter card—12.2(14)SX (6148) With Supervisor Engine 720 and WS-F6K-48-AF PoE daughter card—12.2(17d)SXB (6148) With Supervisor Engine 720-10GE—12.2(33)SXH With Supervisor Engine 2T—12.2(50)SY Catalyst OS (6148A)—8.4(1) Catalyst OS (6148)—6.4(11) (for software release 6.x); 7.6(9) (for software release 7.x) Queues per port WS-X6148-RJ-45, WS-X6148-45AF, and WS-X6148-RJ45V –Tx—1p2q2t per 8 ports –Rx—1p2t per port WS-X6148A-RJ-45 and WS-X6148A-45AF –Tx—1p3q8t –Rx—1q2t Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis (all variants). Bus connection Single connection into the 32-Gbps shared bus (all variants) Module upgrades available PoE support WS-X6148-RJ-45—Field upgradeable to the Cisco prestandard only with the WS-F6K-VPWR-GE= daughter card or both the Cisco prestandard and the IEEE 802.3af standard by installing the WS-F6K-GE48-AF= daughter card. WS-X6148A-RJ-45—Field upgradeable to the Cisco prestandard and the IEEE 802.3af standard by installing the WS-F6K-GE48-AF= daughter card. See the Cisco Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note for field upgrade procedures. See Appendix A for further information on the PoE daughter cards. Distributed forwarding supportNot supported. Table 2-16 WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules Features (continued) Feature Description
2-26 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Pluggable transceivers supportNot supported. TDR support Yes Module front panel LEDsSTATUS Green—All diagnostics pass; the module is operational. Orange—The module is booting or running diagnostics. An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.) Red—The module is resetting. The switch has just been powered on or the module has been hot inserted during the normal initialization sequence. An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.) If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. LINK Green—The port is active (the link is connected and operational). Orange—The module or port is disabled through the CLI command or the module is initializing. Flashing orange—The port is faulty and has been disabled. Off—The port is not active or the link is not connected. PHONE Green—The PoE daughter card is installed and detected. Off—The PoE daughter card is not detected or is not installed. Table 2-16 WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules Features (continued) Feature Description
2-27 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Table 2-17 WS-X6148-RJ-45 Ethernet Modules Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. Weight WS-X6148-RJ-45 (Base module)—6.8 lb (3.08 kg) WS-X6148A-RJ-45 (Enhanced base module)—7.2 lb (3.27 kg) Power and heat numbers WS-X6148-RJ-45 –Module current—2.39 A –Module power—100.38 W –AC-input power—125.48 W –AC heat dissipation—428.50 BTU/hour –DC-input power—134.92 W –DC heat dissipation—460.75 BTU/hour WS-X6148-45AF (base module + PoE daughter card) –Module current—2.57 A –Module power—107.94 W –AC-input power—134.33 W –AC heat dissipation—460.77 BTU/hour –DC-input power—145.08 W –DC heat dissipation—495.45 BTU/hour WS-X6148-RJ45V (base module + PoE daughter card) –Module current—2.81 A –Module power—118.02 W –AC-input power—147.53 W –AC heat dissipation—503.80 BTU/hour –DC-input power—158.63 W –DC heat dissipation—541.72 BTU/hour
2-28 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Power and heat numbers (continued)WS-X6148A-RJ-45 –Module current—1.00 A –Module power—42.00 W –AC-input power—52.50 W –AC heat dissipation—179.29 BTU/hour –DC-input power—55.45 W –DC heat dissipation—192.78 BTU/hour WS-X6148A-RJ45AF (enhanced base module + PoE daughter card) –Module current—1.42 A –Module power—59.64 W –AC-input power—74.55 W –AC heat dissipation—254.59 BTU/hour –DC-input power—80.16 W –DC heat dissipation—273.75 BTU/hour Environment Operating temperature Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) Humidity (RH) ambient (noncondensing)10 to 90% Operating altitude Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m) Table 2-17 WS-X6148-RJ-45 Ethernet Modules Physical and Environmental Specifications (continued) Item Specification
2-29 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules WS-X6148E-GE-45AT Ethernet Module The WS-X6148E-GE-45AT Ethernet module provides 48 10/100/1000-Mbps full- or half-duplex ports. Figure 2-8 shows the module front panel. The module provides 48 ports of enhanced PoE support. Figure 2-8 WS-X6148E-GE-45AT Ethernet Module Front Panel Table 2-18 lists the features and descriptions for the module, and Table 2-19 lists the physical and environmental specifications for the modules. WS-X6148E-GE-45AT48 PORT 10/100/1000 IEEE 802.3AT1 211 1213 1423 2425 2635 3637 3847 48 STATUS1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48PHONE255103 Table 2-18 WS-X6148E-GE-45AT Ethernet Module Features Feature Description Ports per module 48 ports. Ports are numbered (left to right): –Top row, odd numbered ports 1–47 –Bottom row, even numbered ports 2–48 Port groups: 6 Port ranges per port group: 1–8, 8–16, 17–24, 25–32, 33–40, 41–48 Port connector type RJ-45 Cabling distance 328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable Buffer size 5.3 MB per 8 ports QoS Number of egress queues: 4 Number of ingress queues: 2 Number of thresholds per egress queue: 8 Number of thresholds per ingress queue: 4 Maximum frame size Up to 9216 bytes per frame Module oversubscription rate 8:1 Supervisor engine support Supported on the following supervisor engines: Supervisor Engine 32 Supervisor Engine 720 Supervisor Engine 720-10GE Supervisor Engine 2T Software support 12.2(33)SXI4 Supervisor Engine 2T support requires 12.2(50)SY Queues per port Tx—1p3q8t Rx—1q2t Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis.
2-30 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Bus connection Single connection into the 32-Gbps shared bus Module upgrades available PoE support Comes equipped with the WS-F6K-48-AT PoE daughter card. The WS-F6K-48-AT PoE daughter card can not be used on any other Ethernet module. See Appendix A for further information on the PoE daughter cards. Distributed forwarding supportNot supported. Pluggable transceivers supportNot supported. TDR support Yes Module front panel LEDsSTATUS Green—All diagnostics pass; the module is operational. Orange—The module is booting or running diagnostics. An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.) Red—The module is resetting. The switch has just been powered on or the module has been hot inserted during the normal initialization sequence. An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.) If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. LINK Green—The port is active (the link is connected and operational). Orange—The module or port is disabled through the CLI command or the module is initializing. Flashing orange—The port is faulty and has been disabled. Off—The port is not active or the link is not connected. PHONE Green—The PoE daughter card is installed and detected. Off—The PoE daughter card is not detected or is not installed. Table 2-18 WS-X6148E-GE-45AT Ethernet Module Features (continued) Feature Description