Cisco 881w Manual
Have a look at the manual Cisco 881w Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CH A P T E R 1-1 Cisco Integrated Services Router Hardware Installation Guide 1 Product Overview This chapter provides an overview of the features available for the Cisco 812, Cisco 819, Cisco 860, 880, 890 Integrated Services Router (ISR) and contains the following sections: Cisco 810 Series, page 1-1 Cisco 860, 880, 890 Series, page 1-42 NoteFor compliance and safety information, see Regulatory Compliance and Safety Information for Cisco 800 Series Routers. Cisco 810 Series This section contains the following: Cisco 812 Series, page 1-1 Cisco 819 Series, page 1-10 Cisco 812 Series This section provides an overview of the features available for the Cisco 812 Integrated Services Router (ISR) and contains the following sections: General Description, page 1-1 Hardware Features, page 1-4 SKU Information, page 1-9 NoteFor compliance and safety information, see Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers. General Description The Cisco 812 ISR is a new router that looks like an Access Point with 3G, WLAN, and routing capabilities.
1-2 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series The 3rd Generation (3G) is a generation of standards for mobile technology that facilitates growth, increased in bandwidth, and supports more diverse applications. The Cisco 812 ISR can be powered by an (included) external AC adapter or by a PoE+ capable Ethernet source using an optional Cisco PoE splitter C810-POE-SPL. A Wireless Local Area Network (WLAN) implements a flexible data communication system frequently augmenting rather than replacing a wired LAN within a building or campus. WLANs use radio frequency to transmit and receive data over the air, minimizing the need for wired connections. Figure 1-1 shows the Cisco 812 ISR. Figure 1-1 Cisco 812 ISR 344399
1-3 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Figure 1-2 shows the 3G antenna and LEDs display. Figure 1-2 Cisco 812 ISR 3G and LEDs Display 1 2 43 344400 13G diversity antenna3WiFi LED 23G main antenna43G LED
1-4 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Figure 1-3 shows the I/O side of the Cisco 812 ISR. Figure 1-3 Cisco 812 ISR I/O Side Hardware Features The Cisco 812 ISR supports the following hardware features: Platform Features, page 1-4 Antenna, page 1-5 LEDs, page 1-5 Memory, page 1-8 Power Supply, page 1-8 NoteThe WAAS Express feature is not supported. This feature will be supported for 3G and 4G interfaces with later IOS releases. Platform Features The Cisco 812 ISR has the following platform features: 1x GE Enabled WAN (1000/100/10 Base T) 2 TNC connectors for 3G main and diversity antenna (diversity antenna multiplexed with GPS) 512 MB Compact Flash Memory 512 MB DRAM AC Power Brick (100–264 V and max 0.5 A) Optional PoE+ (802.3at Class 4) Power Splitter Built-in Grounding MAIN C812G GE WANS L CON/ AUX5VDC 4.0A DIV/GPS 3421 344393 1GE WAN port3Power connection port 2Console/Aux port4Power switch
1-5 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Ceiling and Wall Mounting Option LED indicators for the platform Antenna The Cisco 812 ISR supports 3G external antenna and WiFi embedded antenna. 3G External Antenna The Cisco 812 ISR provides two standard panel-mount TNC connectors to support 3G. The main antenna is used for the primary 3G antenna. The second can be used as a diversity receive only 3G antenna or an amplified GPS antenna. See Figure 1-2 for the location of the antennas. WiFi Embedded Antenna The Cisco 812 ISR supports Dual ports WiFi radios (802.11 a/b/g/n) with embedded 2x3 MIMO. For compliance and safety information, see the Regulatory Compliance and Safety Information for the Cisco 800 Series and SOHO Series Routers. LEDs The Cisco 812 ISR has two LEDs located on the top side of the router. The 3G LED is located on the lower right side with respect to the Cisco logo. 3G LED supports multiple functions and colors. The WiFi LED is located on lower left side with respect to the Cisco logo. Ta b l e 1 - 1 describes the 3G LED for the Cisco 812 ISR. Table 1-1 Cisco 812 3G LED Descriptions ROMMON Mode 3G LED LED Color Description System Yellow FPGA download is complete. Green (four blinks) ROMMON is running. Off No power. Incomplete FPGA download. IOS 3G Mode 3G Service Type White MC8700—2G (GPRS/EDGE) MC5728—1xRTT Green MC8700—3G (UMTS) MC5728—EVDO Rev 0 Light Blue MC8700—3.5G (HSPA) MC5728—EVDO Rev A Blue MC8700—3.7G (HSPA+) MC5728—N/A Off (solid) No service.
1-6 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series RSSI1White, Green, Light Blue, or Blue (solid)Signal > –60 dBm Very strong signal White, Green, Light Blue, or Blue (three blinks and then a long pause)Signal
1-7 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Ta b l e 1 - 2 describes the WiFi LED for the Cisco 812 ISR. Table 1-2 Cisco 812 ISR WiFi LED Descriptions Message Type Color Description Boot loader status sequence Blinking Green DRAM memory test in progress. DRAM memory test is OK. Board initialization in progress. Initializing FLASH file system. Initializing Ethernet. Ethernet is OK. Starting Cisco IOS. Initialization successful. Association status Green Normal operating condition with no wireless client associated. Blue Normal operating condition with at least one wireless client associated. Operating status Blinking Blue Software upgrade in progress. Rapidly cycling through Blue, Green, Red, and WhiteAccess point location command invoked. Blinking Red Ethernet link not operational. Yellow Router is powered up. FPGA download is complete. Blinking Green LED blinks four times when ROMMON is up. Boot loader warnings Blinking Blue Configuration recovery in progress. (MODE button pushed for 2 to 3 seconds) Red Ethernet failure. Blinking Green Image recovery in progress (MODE button released). Boot loader errors Red DRAM memory test failure. Blinking Red and Blue FLASH file system failure. Blinking Red and Off Environment variable failure. Bad MAC address. Ethernet failure during image recovery. Boot environment failure. No Cisco image file. Boot failure.
1-8 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Memory The Cisco 812 ISR supports 512 MB DRAM and 512 MB compact flash memory. The Host router software runs on the first core. The second core runs the WLAN Access Point software. If WLAN is not supported in an SKU, all 512 MB DRAM memory is allocated to the first core. For the SKUs that support WLAN, 128 MB out of the 512 MB main memory is allocated to the second core. If WLAN is not supported in an SKU, all 512 MB DRAM compact flash memory is allocated to the first core. For the SKUs that support WLAN, 64 MB out of the 512 MB main memory is allocated to the second core. Power Supply The following are power adapters supported in the Cisco 812 ISR: AC Power Adapter, page 1-8 PoE+ Splitter, page 1-8 AC Power Adapter The default configuration is AC adapter that supports up to 4 A of 5 VDC current. The supported AC power adapter is PWR2-20W-AC that has a nominal input voltage of 100 to 240 VAC. PoE+ Splitter The Cisco PoE+ splitter (C810-POE-SPL) splits PoE+ into power and GE. It has connectors built into the power supply at both input and output so cables can be used at desired length as an option. Figure 1-4 shows the I/O side of the PoE+ splitter.Cisco IOS errors Red Software failure. Try to disconnect and reconnect the unit power. Cycling through Blue, Green, Red, and Off General warning. Table 1-2 Cisco 812 ISR WiFi LED Descriptions (continued) Message Type Color Description
1-9 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Figure 1-4 PoE+ Splitter I/O Side SKU Information Ta b l e 1 - 3 lists the different SKUs available for the Cisco 812 ISR. The AP802-AGN-X-K9 (WLAN PID) is integrated as part of the router for the SKUs that support WLAN and is not orderable separately. OUTPUT OUTPUT 6552134345067 1Grounding location4PoE+ input 2Power status LED5Openings for power cord latch to lock into enclosure 3GE0 output6Input power connection Table 1-3 Supported SKUs SKU ID WLAN PID Description C812G+7-K9 — C812 Secure Router Standalone Unit (non-US) 3.7G HSPA + Release 7 with SMS/GPS WLAN is not supported. C812G-CIFI+7-E-K9 AP802-AGN-E-K9 C812 Secure Router (non-US) 3.7G HSPA + Release 7 with SMS/GPS and Dual WiFi Radio with ETSI C812G-CIFI+7-N-K9 AP802-AGN-N-K9 C812 Secure Router (non-US) 3.7G HSPA + Release 7 with SMS/GPS and Dual WiFi Radio with ANZ C812G-CIFI-V-A-K9 AP802-AGN-A-K9 C812 Secure Router for Verizon EV-DO Rev A with SMS/GPS and Dual WiFi Radio with FCC C812G-CIFI-S-A-K9 AP802-AGN-A-K9 C812 Secure Router for Sprint EV-DO Rev A with SMS/GPS and Dual WiFi Radio with FCC
1-10 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Cisco 819 Series This section provides an overview of the features available for the Cisco 819 and Cisco 819H Integrated Services Routers (ISRs) and contains the following sections: General Description, page 1-10 SKU Information, page 1-14 Hardware Features, page 1-27 NoteCisco 819 is used to refer to Cisco 819HG, Cisco 819G, Cisco 819H, Cisco 819GW, Cisco 819HGW, Cisco 819HWD, Cisco 819HG-4G, and Cisco 819G-4G ISRs unless specifically called out otherwise. NoteThis product is a Class 1 Outside Plant (OSP) as per Telcordia GR-3108. NoteFor compliance and safety information, see Regulatory Compliance and Safety Information Roadmap that ships with the router and Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers. General Description The Cisco 819 Integrated Services Router, part of the Cisco Integrated Services Routers Generation 2 (ISR G2) Family designed in compact hardened and non-hardened form factors, is the smallest Cisco IOS Software router with support for integrated fourth-generation (4G LTE) and third-generation (3G) wireless WAN (mobile broadband backhaul). The Cisco 819GW now supports Dual 802.11 a/b/g/n radios WiFi. The Cisco 819 ISR machine-to-machine gateway provides a rapidly deployable, highly available, reliable, and secure solution into machine-to-machine applications for financial, telemetry, utility, retail, industrial automation, and transportation with comprehensive management capability. Transparently integrated into Cisco IOS Software as an enterprise-class feature, the Cisco 819 Hardened ISR provides highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. Available in both non-hardened (Cisco 819G) and hardened (Cisco 819HG) versions, the Cisco 819 supporting 4G LTE and 3G wireless WAN (WWAN) speeds offers a cost-effective, rapidly deployable, reliable, and secure primary or backup solution. With support for industrial-grade components, the hardened Cisco 819HG extends the ISR machine-to-machine gateway footprint and provides the flexibility for deployment in many different stationary and mobile environments where space, heat dissipation, exposure to extreme temperatures, harsher environments, and low power consumption are critical factors. For mobile applications, Mobile IP delivers transparent roaming across multiple wireless networks capable of covering wide geographic areas. The Cisco 819 ISR is a standard form factor with a commercial operating range. The 3G Cisco 819 ISRs support the 3G speeds (High-Speed PacketAccess Plus [HSPA+] enabling up to 4G speeds and Evolution Data Optimized [EVDO Rev A]). They are backward-compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EVDO Rev 0/1xRTT.