Cisco 881w Manual
Have a look at the manual Cisco 881w Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1-21 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series C819G-LTE-MNA- K9 LT E HSPA+ EDGE/GPRS/G SM CDMA EVDOGlobal (Europe and Australia)LTE: 850MHz(band 19) 1500MHz(band 21) 2100MHz(band 1) 3G(UMTS,HSPA+,HSPA): 800MHz(band 6) 850MHz(band 5) 850MHz(band 19) 2100MHz(band 1) 2G(GSM,EDGE,GPRS): 850MHz 900MHz 1800MHz 1900MHzC819G-LTE-MNA-K9 is a dedicated Multimode LTE SKU for global wireless network and comes with a Sierra Wireless MC7354-MNA modem. C819G-LTE-MNA-K9 is a non-hardened Cisco 819 Series Router. For 3GPP compliance, the extended temperature range for this SKU is -15 to 50C. For non-3GPP compliance, it is -15 to 55C. Dual SIMs in this SKU provide high reliability and cellular multihoming support for LTE and HSPA-based networks using the common FW technology within the same region. Dual SIMs provide switchover with different FW technology. NoteThis SKU does not have a WiFi module. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-22 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series C819HG-LTE-MNA -K9 LT E HSPA+ EDGE/GPRS/G SM CDMA EVDONorth America LTE: AWS (band 4) 850MHz(band 19) 1500MHz(band 21) 2100MHz(band 1) 3G(UMTS,HSPA+,HSPA): 800MHz(band 6) 850MHz(band 5) 850MHz(band 19) 2100MHz(band 1) 2G(GSM,EDGE,GPRS): 850MHz 900MHz 1800MHz 1900MHzC819HG-LTE-MNA-K9 is a dedicated Multimode LTE SKU for North American wireless networks and comes with a Sierra Wireless MC7354-MNA modem. C819G-LTE-MNA-K9 is a hardened Cisco 819 Series Router. For 3GPP compliance, the extended temperature range for this SKU is -15 to 50C. For non-3GPP compliance, it is -15 to 55C. Dual SIMs in this SKU provide high reliability and cellular multihoming support for LTE and HSPA-based networks using the common FW technology within the same region. Dual SIMs provide switchover with different FW technology. NoteThis SKU does not have a WiFi module. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-23 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series C819G-LTE-LA-K9LT E HSPA+ HSPA UMTSLatin America/APACFor FDD LTE: 700 MHz (band 28) 850 MHz (band 5) 800 MHz (band 19) 800 MHz (band 18) 900 MHz (band 8) 1800 MHz (band 3) 2100 MHz (band 1) 2600 MHz (band 7) For TDD LTE: 1900 MHz (Band 39) 2300 MHz (Band 40) 2500 MHz (Band 41) 2600 MHz (Band 38) For UMTS, HSPA+, HSPA: 800 MHz (band 6) 800 MHz (band 19) 850 MHz (band 5) 900 MHz (band 8) 1700 MHz (band 9) 2100 MHz (band 1)C819G-LTE-LA-K9 is a dedicated Multimode LTE SKU for Latin American wireless networks and comes with a Sierra Wireless MC7430 modem. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-24 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series C819GW-LTE-LA- CK9LT E HSPA+ HSPA UMTSLatin America/APACFor FDD LTE: 700 MHz (band 28) 850 MHz (band 5) 800 MHz (band 19) 800 MHz (band 18) 900 MHz (band 8) 1800 MHz (band 3) 2100 MHz (band 1) 2600 MHz (band 7) For TDD LTE: 1900 MHz (Band 39) 2300 MHz (Band 40) 2500 MHz (Band 41) 2600 MHz (Band 38) For UMTS, HSPA+, HSPA: 800 MHz (band 6) 800 MHz (band 19) 850 MHz (band 5) 900 MHz (band 8) 1700 MHz (band 9) 2100 MHz (band 1)C819G-LTE-LA-CK9 is a dedicated Multimode LTE SKU for Latin American/ APAC wireless networks and comes with a Sierra Wireless MC7430 modem. C819GW-LTE-LA-CK9 comes with WiFi-C 802.11n dual radio. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-25 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series C819GW-LTE-LA- QK9LT E HSPA+ HSPA UMTSLatin America/APACFor FDD LTE: 700 MHz (band 28) 850 MHz (band 5) 800 MHz (band 19) 800 MHz (band 18) 900 MHz (band 8) 1800 MHz (band 3) 2100 MHz (band 1) 2600 MHz (band 7) For TDD LTE: 1900 MHz (Band 39) 2300 MHz (Band 40) 2500 MHz (Band 41) 2600 MHz (Band 38) For UMTS, HSPA+, HSPA: 800 MHz (band 6) 800 MHz (band 19) 850 MHz (band 5) 900 MHz (band 8) 1700 MHz (band 9) 2100 MHz (band 1)C819GW-LTE-LA-QK9 is a dedicated Multimode LTE SKU for Latin American / APAC wireless networks and comes with a Sierra Wireless MC7430 modem. C819GW-LTE-LA-QK9 comes with WiFi-Q 802.11n dual radio. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-26 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Re-branding of C8xx-B and EHWIC-3G-EVDO-B The C881G-B-K9, C819G-B-K9, and EHWIC-EVDO-B (Bharat) SKUs are introduced as an umbrella SKU to cover BSNL, Tata, and Reliance service providers in India. Software based mechanism is introduced to identify specific carrier. Carrier ID and name are displayed under show cellular hardware. The software mechanism is backward compatible with other existing CDMA SKUs such as HWIC-3G-CDMA(-S,-V) and PCEX-3G-CDMA(-S,-V). Cisco IOS Requirement 15.3(2)T, 15.3(3)M or later. New MIB objects for carrier ID and name will be introduced in later release. Sample CLI Output Router#show cellular 0/0/0 hardware Modem Firmware Version = p2813301 Modem Firmware built = 06-24-10 Hardware Version = MC5728V Rev 1.0 C819GW-LTE-LA- NK9LT E HSPA+ HSPA UMTSLatin America / APACFor FDD LTE: 700 MHz (band 28) 850 MHz (band 5) 800 MHz (band 19) 800 MHz (band 18) 900 MHz (band 8) 1800 MHz (band 3) 2100 MHz (band 1) 2600 MHz (band 7) For TDD LTE: 1900 MHz (Band 39) 2300 MHz (Band 40) 2500 MHz (Band 41) 2600 MHz (Band 38) For UMTS, HSPA+, HSPA: 800 MHz (band 6) 800 MHz (band 19) 850 MHz (band 5) 900 MHz (band 8) 1700 MHz (band 9) 2100 MHz (band 1)C819GW-LTE-LA-NK9 is a dedicated Multimode LTE SKU for Latin American / APAC wireless networks and comes with a Sierra Wireless MC7430 modem. C819GW-LTE-LA-NK9 comes with WiFi-N 802.11n dual radio. Table 1-6 Supported 4G LTE SKUs for Cisco 819HG-4G and Cisco 819G-4G ISRs (continued) SKU ID Mode Operating Regions Frequency Band Description
1-27 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Electronic Serial Number (ESN) = 0x60E62C87 [09615084679] Preferred Roaming List (PRL) Version = 10 PRI SKU ID = 535479 Carrier ID = 19 Carrier Name = Reliance Current Modem Temperature = 30 degrees Celsius Endpoint Port Map = 75 Router# Router#show cellular 0/1/0 hardware Modem Firmware Version = p2813301 Modem Firmware built = 06-24-10 Hardware Version = MC5728V Rev 1.0 Electronic Serial Number (ESN) = 0x60E62431 [09615082545] Preferred Roaming List (PRL) Version = 10 PRI SKU ID = 535479 Carrier ID = 29 Carrier Name = Tata Current Modem Temperature = 30 degrees Celsius Endpoint Port Map = 75 Router# Hardware Features This section provides an overview of the following hardware features for the Cisco 819 ISR. Platform Features for Cisco 819 ISRs, page 1-27 Antennas, page 1-29 Power Switch, page 1-29 Reset Button, page 1-30 LEDs, page 1-30 Memory, page 1-34 Embedded 3G Modem, page 1-34 Embedded 4G LTE Modem, page 1-34 SIM Card, page 1-34 Supported Cisco Antennas and Cables, page 1-35 Serial Port, page 1-40 Power Supply, page 1-41 Accessories, page 1-42 NoteThe WAAS Express feature is not supported. This feature will be supported for 3G and 4G interfaces with later IOS releases. Platform Features for Cisco 819 ISRs Ta b l e 1 - 7 lists the platform features comparison for the Cisco 819 ISRs.
1-28 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Table 1-7 Cisco 819 ISRs Platform Features Platform FeaturesCisco 819HG Cisco 819G (with 3G)Cisco 819HGW Cisco 819HWD (with 3G and WiFi)Cisco 819HG-4G Cisco 819G-4G (with 4G LTE)Cisco 819GW (with 4G LTE and WiFi) 512 MB DRAM Yes — — — 1 GB DRAM — Yes Yes Yes 1 Gigabit Ethernet WA N p o r tYe s Ye s Ye s Ye s 12-in-1 serial interface Ye s Ye s Ye s Ye s 256 KB of NVRAM storageYe s Ye s Ye s Ye s 256 Compact Flash support in IDE mode (internal)Ye s — — — 1 GB Compact Flash support in IDE mode (internal)—Yes YesYes Cisco EnergyWise Yes Yes — Yes Dual 802.11 a/b/g/n Radios with Cisco DFS, CleanAir, and Client Link support—Yes — Yes Embedded 3G modemYe s Ye s — — Embedded 4G LTE modem—— YesYes Environmental monitoring and temperature loggingYe s Ye s — Ye s Four ports FE interconnect switch supportYe s Ye s Ye s Ye s LED indicators for the platform Ye s Ye s Ye s Ye s Onboard crypto accelerationYe s Ye s Ye s Ye s Power cord retention lock—Yes YesYes Power switch lock — Yes Cisco 819HG-4G ISRs onlyYe s R e s e t b u t t o n Ye s Ye s Ye s Ye s
1-29 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Antennas The Cisco 819 3G routers provide two standard panel-mount TNC connectors to support the 3G antenna and the diversity and GPS external antenna. The main antenna is used for the primary 3G antenna. The second can be used as a diversity receive only 3G antenna or GPS antenna that does not require power supply from the router. The Cisco 819 4G routers provide two standard panel-mount TNC connectors on the router front panel for the main and diversity antennas. The main antenna connector is used for the primary 4G antenna. The second antenna connector can be used as a diversity receive only 4G antenna. An SMA connector for active GPS antenna is also available on the front panel of the router. The Cisco 819HGW and Cisco 819HWD ISRs also support Cisco WiFi external antennas. See the “Supported Cisco Antennas and Cables” section on page 1-35 for more information. WiFi External Antenna The external WiFi antenna is used to support better WiFi coverage. All external antenna supports the following: Dual 802.11 a/b/g/n radios 2x3 MIMO Omnidirectional Power Switch The power switch shuts down the router. A power switch lock is available to prevent accidental turning off of the router in the hardened SKUs. Real Time Clock (RTC) 1Ye s Ye s Ye s Ye s ScanSafe Yes Yes — Yes Single console/AUX portYe s Ye s Ye s Ye s SNMP Yes Yes — Yes TFTP support with Ethernet WAN interface— Yes — Yes Warm reload Yes Yes — Yes 1. A real-time clock (RTC) with battery backup provides date and time when the system is powered on. The RTC is used to verify the validity of the Certification Authority stored on the router. Table 1-7 Cisco 819 ISRs Platform Features (continued) Platform FeaturesCisco 819HG Cisco 819G (with 3G)Cisco 819HGW Cisco 819HWD (with 3G and WiFi)Cisco 819HG-4G Cisco 819G-4G (with 4G LTE)Cisco 819GW (with 4G LTE and WiFi)
1-30 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 810 Series Reset Button The Reset button resets the router configuration to the default configuration set by the factory. To restore the router configuration to the default configuration set by the factory, use a standard size #1 paper clip with wire gauge 0.033 inch or smaller and simultaneously press the reset button while applying power to the router. LEDs The LEDs are located on the front panel of the router. Ta b l e 1 - 8 describes the 3G LEDs for the Cisco 819 ISR. Table 1-8 3G LED Descriptions LED Color Description SYS Yellow FPGA download is complete. Green (blinking) ROMMON is operational. Green (solid) IOS is operational. Green (four blinks during bootup)Reset button has been pushed during the bootup. Off After powering up, when FPGA is being downloaded (in ROMMON). ACT Green (blinking) Network activity on FE Switch ports, GE WAN port, 3G cellular interface, and serial interfaces. Off No network activity. WWAN Green Module is powered on and connected but not transmitting or receiving. Green (slow blinking) Module is powered on and searching for connection. Green (fast blinking) Module is transmitting or receiving. Off Module is not powered. GPS Green (solid) Standalone GPS. Green (slow blinking) GPS is acquiring. Yellow (solid) Assisted GPS. Yellow (slow blinking) Assisted GPS is acquiring. Off GPS is not configured.