Cisco C40 Manual

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
101
SIP Profile [1..1] Ice Mode
ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the 
endpoints can use to discover the optimized media path. Thus the shortest route for audio and 
video is always secured between the endpoints. NOTE: ICE is not supported when registered to 
CUCM (Cisco Unified...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
102
SIP Profile [1..1] Turn Password
The password needed for accessing the TURN server.
Requires user role:  ADMIN
Value space:  
Format:  String with a maximum of 128 characters.
Example:
 SIP Profile 1 Turn Password: ""
SIP Profile [1..1] URI
The SIP URI (Uniform Resource Identifier) is the address that is used to identify the...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
10 3
SIP Profile [1..1] Outbound
Turn on or off the client initiated connections mechanism for firewall traversal, connection reuse 
and redundancy. The current version supports RFC 5626.
Requires user role:  ADMIN
Value space:  
Off:  Connect to the single proxy configured first in Proxy Address list.
On:  Set up multiple outbound...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
104
Standby settings
Standby Control
Determine whether the system should go into standby mode or not.
Requires user role:  ADMIN
Value space:  
Off:  The system will not enter standby mode.
On:  Enter standby mode when the Standby Delay has timed out. NOTE: Requires the 
Standby Delay to be set to an appropriate value.
Example:
 Stand by...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
10 5
SystemUnit settings
SystemUnit Name
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured 
on the system then this ID will be used instead of the system name. The system name will be 
displayed:
 1) When the codec is acting as an SNMP Agent.
 2) Towards a DHCP server.
Requires user role:  ADMIN...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
10 6
SystemUnit IrSensor
Both the Codec C Series and PrecisionHD camera have IR sensors, and only one of them 
needs to be enabled at the time. The IR sensor LED is located on the front of the codec and the 
camera and flickers when an IR signal is received from the remote control.
Requires user role:  ADMIN
Value space:  
Auto:  The system...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
107
Time settings
Time Zone
Set the time zone where the system is located, using Windows time zone description format.
Requires user role:  USER
Value space:  
Range:  Select a time zone from the list time zones. If using a command line interface; watch 
up for typos.
Example:
 Time Zone: "GMT (Greenwich Mean Time : Dublin, Edinburgh,...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
10 8
UserInterface settings
UserInterface TouchPanel DefaultPanel
Select whether to display the list of contacts, the list of scheduled meetings, or a dial pad on 
the Touch controller as default.
Requires user role:  USER
Value space:  
ContactList:  The contact list (favorites, directory and history) will appear as default on the 
Touch...

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
10 9
Video settings
Video Input Source [1..3] Name
Enter a name for the video input source.
Requires user role:  ADMIN
Value space:  
Format:  String with a maximum of 50 characters. 
Example:
 Video Input Source 1 Name: ""
Video Input Source [1] Connector
Select which video input connector to be active on video input source 1....

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
11 0
Video Input Source [1..3] PresentationSelection
In general, any input source can be used as a presentation source; normally, the main camera 
(self view) will not be used as a presentation source.
This setting is used to define whether to display the presentation source on the local video 
system's display automatically or not. To...