Home > Cisco > TelePresence System > Cisco C40 Manual

Cisco C40 Manual

Here you can view all the pages of manual Cisco C40 Manual. The Cisco manuals for TelePresence System are available online for free. You can easily download all the documents as PDF.

Page 61

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
61
Audio Input Line [1..2] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a Line audio input.
Requires user role:  ADMIN
Value space:  
Off:  No video source is associated.
On:  A video source is associated, and the audio will be muted if the associated video source 
is not displayed.
Example:
 Audio Input Line...

Page 62

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
62
Audio Input Microphone [1..2]/[1..4] EchoControl Mode
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone 
connectors.
The echo canceller continuously adjusts itself to the audio characteristics of the room and 
compensate for any changes it detects in the audio environment. If the changes in the audio 
conditions...

Page 63

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
63
Audio Input Microphone [1..2]/[1..4] VideoAssociation MuteOnInactiveVideo
NOTE: Codec C40 has two microphone connectors. Codec C60 has four microphone 
connectors.
Enable association of a video source to a microphone audio input. 
Requires user role:  ADMIN
Value space:  
Off:  No video source is associated.
On:  A video source is...

Page 64

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
64
Audio Output HDMI [1] Mode
Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role:  ADMIN
Value space:  
Off:  Disable the audio channel on the HDMI output.
On:  Enable the audio channel on the HDMI output.
Example:
 Audio Output HDMI 1 Mode: On
Audio Output Line [1..2] Channel
Define whether the...

Page 65

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
65
Audio Output Line [2] Type
Line output 2 is a dedicated analog output, hence type can be set to analog only.
Requires user role:  ADMIN
Value space:  
Analog:  Can be set to analog only.
Example:
 Audio Output Line 2 Ty pe: Analog
Audio Microphones Mute Enabled
Determine whether audio-mute is allowed or not. The default value is True....

Page 66

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
66
Cameras settings
Cameras Camera [1..7] Backlight
This configuration turns backlight compensation on or off. Backlight compensation is useful 
when there is much light behind the persons in the room. Without compensation the persons 
will easily appear very dark to the far end.
Requires user role:  ADMIN
Value space:  
Off:  Turn off the...

Page 67

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
67
Cameras Camera [1..7] Gamma Mode
Applies to cameras which support gamma mode. The Gamma Mode setting enables for gamma 
corrections. Gamma describes the nonlinear relationship between image pixels and monitor 
brightness. The Cisco TelePresence PrecisionHD 720p camera supports gamma mode. The 
PrecisionHD 1080p camera does not support...

Page 68

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
68
Cameras Camera [1..7] Whitebalance Mode
Set the camera whitebalance mode.
Requires user role:  ADMIN
Value space:  
Auto:  The camera will continuously adjust the whitebalance depending on the camera view.
Manual:  Enables manual control of the camera whitebalance. The whitebalance level is set 
using the Cameras Camera Whitebalance Level...

Page 69

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
69
Conference settings
Conference [1..1] CallProtocolIPStack
Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP, H323).
Requires user role:  ADMIN
Value space:  
Dual:  Enables both IPv4 and IPv6 for H323 and SIP calls. 
IPv4:  When set to IPv4, the call protocol (SIP, H323) will use IPv4.
IPv6:  When...

Page 70

D14636.12 Profile C60-C40 and Codec C60-C40 Administrator Guide TC6.3, OCTOBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reser ved. 
70
Conference [1..1] DoNotDisturb DefaultTimeout
This setting determines the default duration of a Do Not Disturb session, i.e. the period when 
incoming calls are rejected and registered as missed calls. The session can be terminated 
earlier by using the user interface (remote control or Touch controller) or the Conference 
DoNotDisturb...
Start reading Cisco C40 Manual

Related Manuals for Cisco C40 Manual

All Cisco manuals