Comdial Executech 1432 KSU Instructions Manual

IMI 66-036 
Programming 
System COS programming procedure-continued 
10 Specify station type for each station port 
l Press console keys Cl0 - 
C41 to identify station port 10 - 41 
l Press console key to specify station type 
I C42 = 
Single-Line Keyset (administrative phone) 
RECALL = 
Single-Line Keyset (hotel/motel phone)* 
C46 = 
8 Line BLF Keyset 
c47 = 
DSS/BLF Console (40-key) 
C48 = 
3 and 8 Line Keyset 
c49 = 
I 22 Line/Feature Keyset 
Cl0 = 
32-Key Console (without call announce)* 
Keypad Key...

IMI 66-036 Programming 
SYSTEM CdS PROGRAMMING REFERENCE TABLE 
l Shading denotes system default conditions 
l Check off values chosen for system being programmed 
BASE LEVEL (ITCM) (*i) a (4 a (*i) 
1 2 1 300 MkEC. ) 
3 ) 500 MSEC. 
1  4 
1 600 MSEC. 
( 
I 
Note: 0 program selection (dlsa- 
bled) enables exclusive hold condi- 
tion (when set at station) .to place 
line on hold that cannot be released 
at any other statlon. BAUD RATE FOR COS AND SMDR DATA 
t 
@ 80 COLUMN 1 LINE 
@ 40 
CdLLJMN 2 l&S 
6 
9...

I 
IMI 66-036 Programming 
TOLL RESTRICTION PROGRANMING 
In order for toll restriction to take effect, the following three-fold process must occur. 
l One or more toll tables must be entered. 
l Toll tables must be assigned to all appropriate lines. 
l Toll tables must be assigned to all appropriate stations. 
‘Only the toil table(s) which are entered and assigned to both a line and a station using that line 
will invoke any toll restriction. 
TABLE ENTRY PROCEDURE 
1. Determine the types of dialing...

IMI 66-036 
Programming 
1 
2 
3 TOLL RESTRICTION PROGRAMMING PROCEDURE 
Press ITCM * 
7 4 6 * 
(base level entry if not active) 
Press program key B4 (enter toll program mode) 
Press console key Cl0 - 
~25 to select table number (1 - 16) 
4 
6 
6 
10 Sele 
ct table type 
l ; De 
l:, - press program key 85 5 Select table entry l Al l 
Press program key Al - A4 
- press program key B6 
tP select entry 1 - 4 
Dial number (16 digits max.) KEY Al A2 A3 A4 
ENTRY 1234 - 
(Press # for 
digit) match anything 
7...

IMI 66-036 Programming 
Toll restriction tables-continued 
r ’ RESTRICTION TABLE 7 
TYPE: ALLOW ,’ DENY ~ 
I I , I , I I I 4 
TABLE ASSIGNMENT: LINES __ 
STATIONS 
RESTRICTION TABLE 9 
TYPE: ALLOW - DENY ___ 
TABLE ASSIGNMENT: LINES __ 
STATIONS 
RESTRICTION TABLE 11 
TYPE: ALLOW ,/ 
DENY 
RESTRICTION TABLE 13 
TYPE: ALLOW i/ DENY - 
NTRY ENTRY NUMBER (16 MAXIMUM) 
112 13 14 15 16 17 16 19 1lOlll 12 13 14 15 16 
I I I I I ’ b 
I I I I I 
2 4 
I RESTRICTION TABLE 15 
I 
1 TYPE: ALLOW 
DENY - RESTRICTION...

\_ 
IMI 66-036 Programming 
LINE COS PROGRAMMING 
--------------^-------------------------------------------------- 
LINr: 
DEFAULTS 
0 Line type = TtiLCO 
0 Line groups = none assigned 
0 Dial Mode = Diilll? 
l Privacy status = private 
0 Toll Tables = none 
0 Abandoned Hold Timeout = 50 msec. 
assigned 
---------------^------------.------------------------------------- 
PKOCEDURX 
1 Rress ITCti 
* 7 4 6 * (base level entry if not now active) 
2 Select line to 
be pro
ammed. 
Pewrform all applicable...

LINE COS PROGRAMMING REFERENCE TABLE 
l 
Shading denotes line default conditions. l Check off or enter the values chosen for the lines being programmed. 
BASE LEVEL @@mama 
LINE : PROGRAMMING MODE (Al-a 
I 
.IMI 66-036 Programming 
TOLL 
RESTRICTION 
TABLE 
ASSIGNMENT 
- 
I 12 I I 
- 
I 13 
CO/PBX NUMBERS 
AND STATION 
ASSIGNMENTS 
* Power Fail Lines (1, 2, and 3) 
** A-Lead Control Lines (7 and 8) 
3-lob  

IMI 66-036 
Programming 
STATION COS PROGRAMMING 
-_----_----__--___--____________________------------------------- 
STATION DEFAULTS 
l PA port 
= disabled l Executive override = disabled 
0 Ringing line preference 
0 Prime line/group = none 
=disabled 
l Personal ringing tone = 0 Single Line Keyset accesses intercom  
tone 1 l Ringing assignment = all lines ring 
0 Toll tables = none assigned 
on stations 10, 17, 39, and 41 
0 Line access denied = none 
0 Origination denied = none 
0 Idle line...

IMI 66-036 Programming 
Station COS - continued 
8 Choose personal ringing tones 
(22 Line/Feature Keysets) 
l TOAE 1 = keypad key 7 
. TONE: 2 = keypad 
key 8 
0 TONE 3 = keypad key 9 
. ‘I’(jNfi 4 = 
keypad key 0 
1Q Enable message wait 
originate 
0 Press keypad 
key 6 
12 Set ringing line preference 
0 Press program 
key: 
Enabled = BS 
Disabled = i34 
14 Select Night Transfer (ringing) 
0 Press program 
key C44 
(clears previous settings) 
0 Press program 
key(s) 
Al - Al4 = lines 1 - 14 
9 Set...

&I 66-036 Programming 
Station COS - continued 
19a Enter toll table assignment mode 
To clear all toll 
tables assigned 19b Specify toll tables l Press program keys 
l Press program key C49 per chart: 
/ KEY Al A2 A3 A4 A5 A6 A7 A8 
TABLE 1 2 3 4 5 6 7 8 
KEY A9 A10 All A12 A13 A14 B4 B5 
IABLB 9 10 11 12 13 
14 15 16., 
26 Reserve intercom link 
0 Press # 
0 Press keypad 
key 1-7 
to reserve link 1-7 
-or- 
@ Press 0 key for no reserved link 
0 Press console key C42 to 
Continue With next step 
Select...