Comdial Multi Cell Wireless Telephone Users Guide

Adjusting Volume
4.1 Adjusting Volume
The handset has 13 volume settings which allow you to adjust the
volume of what you hear.
To raise volume,
1. While in conversation or when the handset in ringing, press
2. The handset briefly displays the volume setting (00–12).
To lower volume,
1. Press
MCW Handset User’s Guide 4 – 1
GCA70–351 Adjusting Volume
4 

This page remains blank intentionally. 

Mute
5.1 Voice Mute
Voice mute temporarily disconnects the handset microphone so the party
in conversation cannot hear you.
To establish voice mute,
1. While in conversation, press and hold
To cancel voice mute,
1. Press
MCW Handset User’s Guide 5 – 1
GCA70–351 Mute
5 

5.2 Ring Mute
Ring mute temporarily silences ringing on an incoming call without
affecting the call itself.
To mute the handset ringer,
1. When you receive an incoming call, pressCLR.
5 – 2 MCW Handset User’s Guide
Mute GCA70–351 

Locking The Keypad
6.1 Locking The Keypad
In idle mode, you may lock the keypad to avoid accidentally pressing
keys. A locked handset does not respond to any key exceptPWR, but
releases the keypad when you receive an incoming call and relocks it
again when the call terminates.
To lock the keypad,
1.
In idle mode and with no number in the display, press and hold#¯
untilLOCKappears in the display.
To unlock the keypad,
1.
Press and hold#¯.
NOTE: Powering off the handset also unlocks the keypad.
MCW Handset...

This page remains blank intentionally. 

FCN Key
Feature Access
7.1 FCN Key Feature Access
Use of these keys requires system programming and may vary depending
on your telephone system. Your system administrator will provide you
information specific to your phone system.
You can use the following table to list the access codes you must dial to
perform telephone features with theFCNkey.
Feature Press or Dial
MCW Handset User’s Guide 7 – 1
GCA70–351 FCN Key Feature Access
7 

This page remains blank intentionally. 

Speed Dial Calling
8.1 Speed Dial Calling
The handset stores 70 speed dial numbers, 10 of which you can dial by
pressing one key.
To perform one-key dialing,
1. Press and hold digit key 0–9 (to dial a number stored in memory
location 00–09).
2. Release the key as soon as the number appears in the display.
To dial a number stored in memory location 00–69,
1. Dial a memory location 00–69.
2. PressRCL, thenCALL.
MCW Handset User’s Guide 8 – 1
GCA70–351 Speed Dial Calling
8 

To dial a number by scrolling memory locations,
1. PressRCL.
2. Press forward and backward search keys until the number you
want appears in the display.
The first line of the display contains the name and the second line
contains the first nine digits of the number.
3. PressCALL.
To dial a number by entering a name:
1. PressABC
2. Enter first letters of a name.
(SeeEntering Speed Dial Namesfor information on how to enter
characters.)
3. PressRCL.
The handset displays the first name that matches the name...