D-Link Router DHP-1565 User Manual

							36
D-Link DHP-1565 User Manual
Section 3 - Configuration
Manual Internet Connection Setup
DS-Lite
My Internet 
Connection:
DS-Lite 
Configuration:
AFTR IPV6 Address:
B4 IPv6 
Address:
WAN IPv6  Address:
IPv6 WAN  Default 
Gateway: Select DS-Lite to activate this feature. 
Select  the  DS-Lite  DHCPv6  option  to  let  the  router 
allocate the AFTR IPv6 address automatically. Select the 
Manual Configuration to enter the AFTR IPv6 address in 
manually.
After selecting the Manual Configuration option above, 
enter the AFTR IPv6 address used here.
Enter the B4 IPv4 address value used here.
Once connected, the WAN IPv6 address will be displayed 
here.
Once connected, the IPv6 WAN Default Gateway address 
will be displayed here.  
						

							37
D-Link DHP-1565 User Manual
Section 3 - Configuration
Wireless Settings
If  you  want  to  configure  the  wireless  settings  on  your  router  using  the 
wizard,  click  Wireless  Connection  Setup  Wizard  and  refer  to “Wireless 
Connection Setup Wizard” on page 102.
Click  Add Wireless Device with WPS if you want to add a wireless device 
using Wi-Fi Protected Setup (WPS) and refer to “Add Wireless Device with 
WPS Wizard” on page 105.
If you want to manually configure the wireless settings on your router click 
Manual Wireless Connection Setup and refer to the next page.  
						

							38
D-Link DHP-1565 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.
Select  the  time  frame  that  you  would  like  your  wireless 
network enabled. The schedule may be set to Always. Any 
schedule  you  create  will  be  available  in  the  drop-down 
menu. Click New Schedule to create a new schedule.
The Service Set Identifier (SSID) is the name of your wireless 
network.  Create  a  name  using  up  to  32  characters.  The 
SSID is case-sensitive.
Select one of the following:
802.11g	Only - Select if all of your wireless clients are
802.11g.
802.11n	Only - Select only if all of your wireless clients are
802.11n.
802.11b 	Only   -  Select  if  all  of  your  wireless  clients  are 
802.11b.
Mixed	802.11n	and	802.11g	- Select if you are using a mix
of 802.11n and 802.11g wireless clients.
Mixed	802.11g	and	802.11b - Select if you are using a mix of 802.11g and 802.11b wireless clients. 
Mixed	802.11n,	802.11g	and	802.11b - Select 802.11n, 802.11g and 802.11b
The  Auto  Channel  Selection   setting  can  be  selected  to  allow  the  DHP-1565  to  choose  the  channel  with  the  least  amount  of 
interference.
Indicates the channel setting for the DHP-1565. By default the channel is set to 1. The Channel can be changed to fit the channel 
setting for an existing wireless network or to customize the wireless network. If you enable  Auto Channel Selection, this option 
will be greyed out.
Enable 
Wireless:
Schedule:
Wireless 
Network  Name:
802.11	Mode:
Enable Auto  Channel 
Selection:
Wireless 
Channel:
Manual Wireless Settings
802.11n/b/g	(2.4GHz)  
						

							39
D-Link DHP-1565 User Manual
Section 3 - Configuration
Channel Width:
Wireless  Security  Mode:
Click the Save Settings button to save any changes made. Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
Refer to “Wireless Security” on page 137 for more information regarding wireless security.  
						

							40
D-Link DHP-1565 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Use  this  section  to  configure  the  Router’s  local  network 
settings.
Use this section to configure the DHP-1565’s built-in DHCP 
server settings.
Use  this  section  to  create  a  new  DHCP  reservation  or 
manage existing DHCP reservations.
Displays information about the devices that have a DHCP 
reservation from the DHP-1565. The information includes 
the  Host  Name,  IP  Address,  MAC  Address ,  and Expiration 
Time.
Displays  information  about  the  devices  that  have  a 
dynamic DHCP lease from the DHP-1565. The information 
includes the  Host Name, IP Address, MAC Address , and Lease 
Expiration Time.
Router 
Settings:
DHCP Server  Settings:
Add DHCP 
Reservation:
DHCP 
Reservations  List:
Number of  Dynamic 
DHCP Clients:  
						

							41
D-Link DHP-1565 User Manual
Section 3 - Configuration
Network Settings
Enter the IP address of the router. The default IP address 
is 192.168.0.1.
If  you  change  the  IP  address,  once  you  click  Apply,  you 
will need to enter the new IP address in your browser to 
get back into the configuration utility.
Enter  the  Subnet  Mask .  The  default  subnet  mask  is 
255.255.255.0.
Enter a Host Name to identify the DHP-1565.
Enter the Domain name (Optional).
Uncheck  the  box  to  transfer  the  DNS  server  information 
from  your  ISP  to  your  computers.  I f  checked,  your 
computers will use the router for a DNS server.
Router IP 
Address:
Default Subnet  Mask:
Device Name:
Local Domain: Enable DNS  Relay:
Router Settings
Click the Save Settings button to save any changes made.  
						

							42
D-Link DHP-1565 User Manual
Section 3 - Configuration
DHCP stands for Dynamic Host Control Protocol. The DHP-1565 has a built-in DHCP server. The DHCP Server will automatically assign an IP address 
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP 
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DHP-1565. The 
DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting 
and ending address of the IP address pool.
Check  this  box  to  enable  the  DHCP  server  on  your  router. 
Uncheck to disable this function.
Enter the starting and ending IP addresses for the DHCP server’s 
IP assignment.
Note: If  you  statically  (manually)  assign  IP  addresses  to  your 
computers  or  devices,  make  sure  the  IP  addresses  are  outside  of 
this range or you may have an IP conflict. 
The length of time for the IP address lease. Enter the Lease time 
in minutes.
If NetBIOS advertisement is switched on, switching this setting 
on causes WINS information to be learned from the WAN side, 
if available. Turn this setting off to configure manually.
This is an advance setting and is normally left blank. This allows the configuration of NetBIOS domain name under which network 
hosts operate. This setting has no effect if the “ Learn NetBIOS information form WAN is activated.
Enable DHCP 
Server:
DHCP IP  Address  Range:
DHCP Lease  Time:
Learn NetBIOS WAN:
NetBIOS scope:
Network Settings
DHCP Server Settings
When you have finished configuring the new DHCP Server Settings, click the Save Settings button at the top or bottom of the window.  
						

							43
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP 
address only to that computer or device. 
Note: This IP address must be within the DHCP IP Address Range.
Check this box to enable the reservation.
Enter  the  computer  name.  Alter natively,  selec t  a 
computer that currently has a DHCP lease from the drop 
down menu and click  
						

							44
D-Link DHP-1565 User Manual
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Webbased 
IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that has not configured a router before, click
on the IPv6 Internet Connection Setup Wizard button and the router
will guide you through a few simple steps to get your network up and
running.
Manual IPv6 Internet Connection Option
For the advanced user that has configured a router before, click on
the Manual IPv6 Internet Connection Setup button to input all the
settings manually.  
						

							45
D-Link DHP-1565 User Manual
Section 3 - Configuration
Click the  IPv6 Internet Connection Setup Wizard  button and the router 
will guide you through a few simple steps to get your network up and 
running.
The  router  will  try  to  detect  whether  its  possible  to  obtain  the  IPv6 
Internet connection type automatically. If this succeeds then the user 
will be guided through the input of the appropriate parameters for the 
connection type found. Welcome to the D-Link IPv6 Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure 
your newD-Link router and connect to the IPv6 Internet.
Click  Next  to  continue  to  the  next  page.  Click  Cancel to  discard  the 
changes made and return to the main page.