DELL 2350d User Manual

From this
menu:
You can:
Plain*
Card Stock
Transparency
Recycled
Labels
Bond
Envelope
Rough
Envelope
Letterhead
Preprinted
Colored
Light
Heavy
Rough/Cotton
Custom 
(where x
represents
1–6)
Identify the relative weight of the print media loaded in a specific tray and
ensure that the toner adheres properly to the printed page.
Light
Heavy
Normal*
*Factory default setting
Paper Loading 

From this
menu:
You can:
Recycled
Bond
Letterhead
Preprinted
Colored
Paper
Light
Paper
Heavy
Paper
Custom
Type 
(where x
represents
1–6)
Determine whether 2-sided printing occurs for all jobs specifying a print
media type.
Duplex
Off*
*Factory default setting
Universal Setup
From
this
menu:
You can:
Units of
Measure
Specify the height, width, and feed direction of the Universal Paper Size.Inches* (US)
Millimeters* (non-US)
Portrait
Width
Set the portrait width of the universal media.3–14.17 inches...

From
this
menu:
You can:
NOTE:  If the height exceeds the maximum, then the printer uses the
maximum height allowed.
NOTE:   14 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.
NOTE:   356 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Feed
Direction
Specify the feed direction of the Universal Paper Size.Short Edge*
Long Edge
NOTE:  Feed Direction appears only if the longest edge of the media is shorter
than the...

4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
From
this
menu:
You can:
Menu
Settings
Page
Display information relating to:Current settings for each of the menu items for all menus
Cartridge information
List of installed options and features
Device
Statistics
View information relating to:Job Information
Supply Information
Printer
USB Direct
NOTE:  The details presented on this page vary for every device type.
Network
Setup
Page
List important print...

Network/Ports
Mode Mode Main Menu
Network/Port Active NIC
Network Menu
USB Menu
Parallel Menu
Active NIC Mode
Main Menu Mode Main Menu
Active NIC Auto*
Standard Network
* Factory default setting
Network Mode
Main Menu Mode Main Menu
Network PCL SmartSwitch
PS SmartSwitch
NPA Mode
Network Buffer
MAC Binary PS
Network Setup
Each Network sub-menu appears only if the device has a standard network card or if additional network
cards have been installed.
Use the Network menu to change printer settings on jobs...

4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
Network Mode Main Menu
From this
menu:
You can:
PCL
SmartSwitch
Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
On*
Off
PS
SmartSwitch
Set the printer to automatically switch to PostScript emulation when a print
job requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer,...

Mode Mode Main Menu
USB Buffer
MAC Binary PS
USB With ENA
NOTE:   Applicable only to Dell
3300 Wireless Print Adapter
(sold separately).
Use the USB menu to change printer settings on jobs sent through a USB port.From the menu list, use the  Arrow buttons 
   to scroll to the USB menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons 
   to scroll through the available menu...

From this
menu:
You can:
NPA Mode Send print jobs to the printer, and query printer status information at the
same time.
Off
Auto*
USB Buffer Assign a size to the USB input buffer.Auto*
Disabled
3K to  (in 1K increments).
MAC Binary
PS
Configure the printer to process Macintosh binary PostScript emulation print
jobs.
Off
On
Auto*
USB With
ENA
ENA Address-Set the USB port ENA address
ENA Netmask-Set the USB port ENA Netmask
ENA Gateway-Set the USB port ENA Gateway
NOTE:   4-field IP address (0.0.0.0*)...

From the menu list, use the  Arrow buttons 
   to scroll the Parallel menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons 
   to scroll through the available menu items.
4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
Parallel Mode Main Menu
From this
menu:
You can:
PCL
SmartSwitch
Set the printer to automatically...

From this
menu:
You can:
Receive information at a much higher transmission rate if the printer is set
to Fastbytes (if computer supports Fastbytes), or receive information at a
normal transmission rate if the printer is set to Standard.
Standard
Fastbytes*
Honor Init Determine whether the printer honors hardware initialization requests from
the computer. The computer requests initialization by activating the INIT
signal on the parallel interface.
Many personal computers activate the INIT signal each time...